提交 992b402b 编写于 作者: W Wolfgang Denk

Minor fixes to PM854 board

Patch by Josef Wagner, 03 Aug 2005
上级 2c61f14c
......@@ -2,6 +2,9 @@
Changes for U-Boot 1.1.3:
======================================================================
* Minor fixes to PM854 board
Patch by Josef Wagner, 03 Aug 2005
* Adjust configuration of XENIAX board
(chip select and GPIO required for USB operation)
......
......@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := $(BOARD).o flash.o
OBJS := $(BOARD).o
SOBJS := init.o
#SOBJS :=
......
......@@ -102,7 +102,7 @@
/*
* Determine DDR configuration from I2C interface.
*/
#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
#define SPD_EEPROM_ADDRESS 0x58 /* DDR DIMM */
#else
/*
......@@ -144,6 +144,12 @@
#undef CFG_RAMBOOT
#endif
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_FLASH_EMPTY_INFO
#undef CONFIG_CLOCKS_IN_MHZ
/*
* Local Bus Definitions
*/
......@@ -251,16 +257,16 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC1 1
#define CONFIG_MPC85XX_TSEC2 1
#define TSEC1_PHY_ADDR 2
#define TSEC2_PHY_ADDR 3
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
#define CONFIG_MPC85XX_FEC 1
#define FEC_PHY_ADDR 1
#define FEC_PHY_ADDR 3
#define FEC_PHYIDX 0
#define CONFIG_ETHPRIME "MOTO ENET0"
#define CONFIG_ETHPRIME "ENET0"
#define CONFIG_HAS_ETH1 1
#define CONFIG_HAS_ETH2 1
......@@ -382,13 +388,13 @@
#define CONFIG_ETH2ADDR 00:40:42:01:00:02
#endif
#define CONFIG_IPADDR 192.168.0.103
#define CONFIG_HOSTNAME PM854
#define CONFIG_ROOTPATH /opt/eldk30/ppc_82xx
#define CONFIG_BOOTFILE uImage
#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx
#define CONFIG_BOOTFILE pm854/uImage
#define CONFIG_SERVERIP 192.168.0.54
#define CONFIG_HOSTNAME pm854
#define CONFIG_IPADDR 192.168.0.103
#define CONFIG_SERVERIP 192.168.0.64
#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_NETMASK 255.255.255.0
......@@ -403,7 +409,7 @@
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=400000\0" \
"ramdiskfile=uRamdisk\0"
"ramdiskfile=pm854/uRamdisk\0"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw " \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册