提交 94e9411b 编写于 作者: K Kumar Gala

ppc/85xx: Add tracking of TLB CAM usage

We need to track which TLB CAM entries are used to allow us to
"dynamically" allocate entries later in the code.  For example the SPD
DDR code today hard codes which TLB entries it uses.  We can now make
that pick entries that are free.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 ee53650d
......@@ -246,6 +246,7 @@ void cpu_init_f (void)
#ifdef CONFIG_FSL_CORENET
corenet_tb_init();
#endif
init_used_tlb_cams();
}
......
......@@ -56,12 +56,74 @@ void init_tlbs(void)
}
#ifndef CONFIG_NAND_SPL
static inline void use_tlb_cam(u8 idx)
{
int i = idx / 32;
int bit = idx % 32;
gd->used_tlb_cams[i] |= (1 << bit);
}
static inline void free_tlb_cam(u8 idx)
{
int i = idx / 32;
int bit = idx % 32;
gd->used_tlb_cams[i] &= ~(1 << bit);
}
void init_used_tlb_cams(void)
{
int i;
unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++)
gd->used_tlb_cams[i] = 0;
/* walk all the entries */
for (i = 0; i < num_cam; i++) {
u32 _mas1;
mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
asm volatile("tlbre;isync");
_mas1 = mfspr(MAS1);
/* if the entry isn't valid skip it */
if ((_mas1 & MAS1_VALID))
use_tlb_cam(i);
}
}
int find_free_tlbcam(void)
{
int i;
u32 idx;
for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++) {
idx = ffz(gd->used_tlb_cams[i]);
if (idx != 32)
break;
}
idx += i * 32;
if (idx >= CONFIG_SYS_NUM_TLBCAMS)
return -1;
return idx;
}
void set_tlb(u8 tlb, u32 epn, u64 rpn,
u8 perms, u8 wimge,
u8 ts, u8 esel, u8 tsize, u8 iprot)
{
u32 _mas0, _mas1, _mas2, _mas3, _mas7;
if (tlb == 1)
use_tlb_cam(esel);
_mas0 = FSL_BOOKE_MAS0(tlb, esel, 0);
_mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
_mas2 = FSL_BOOKE_MAS2(epn, wimge);
......@@ -80,6 +142,8 @@ void disable_tlb(u8 esel)
{
u32 _mas0, _mas1, _mas2, _mas3, _mas7;
free_tlb_cam(esel);
_mas0 = FSL_BOOKE_MAS0(1, esel, 0);
_mas1 = 0;
_mas2 = 0;
......
......@@ -63,6 +63,13 @@
#define CONFIG_TSECV2
#endif
/* Number of TLB CAM entries we have on FSL Book-E chips */
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
#elif defined(CONFIG_E500)
#define CONFIG_SYS_NUM_TLBCAMS 16
#endif
/* Relocation to SDRAM works on all PPC boards */
#define CONFIG_RELOC_FIXUP_WORKS
......
......@@ -107,6 +107,9 @@ typedef struct global_data {
#if defined(CONFIG_FSL_LAW)
u32 used_laws;
#endif
#if defined(CONFIG_E500)
u32 used_tlb_cams[(CONFIG_SYS_NUM_TLBCAMS+31)/32];
#endif
#if defined(CONFIG_MPC5xxx)
unsigned long ipb_clk;
unsigned long pci_clk;
......
......@@ -479,6 +479,8 @@ extern void disable_tlb(u8 esel);
extern void invalidate_tlb(u8 tlb);
extern void init_tlbs(void);
extern int find_tlb_idx(void *addr, u8 tlbsel);
extern void init_used_tlb_cams(void);
extern int find_free_tlbcam(void);
extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册