configs: ls2080ardb.h: Update mc size in env

Set MC Firmware size in read commands in
env to 2MB.
Update DDR Memory read address for MC firmware to
0x80a00000 and MC DPC address to 0x80e00000.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

include/configs/ls2080ardb.h

@@ -314,11 +314,11 @@ unsigned long get_board_sys_clk(void);
 	"env exists secureboot && "			\
 	"esbc_validate 0x80640000 && "			\
 	"esbc_validate 0x80680000; "			\
-	"sf read 0x80a00000 0xa00000 0x300000; "	\
+	"sf read 0x80a00000 0xa00000 0x200000; "	\
 	"sf read 0x80e00000 0xe00000 0x100000; "	\
 	"fsl_mc start mc 0x80a00000 0x80e00000 \0"
 #define SD_MC_INIT_CMD				\
-	"mmcinfo;mmc read 0x80a00000 0x5000 0x1200;" \
+	"mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \
 	"mmc read 0x80e00000 0x7000 0x800;"	\
 	"env exists secureboot && "		\
 	"mmc read 0x80640000 0x3200 0x20 && "	\
@@ -339,19 +339,19 @@ unsigned long get_board_sys_clk(void);
 	"env exists secureboot && "			\
 	"esbc_validate 0x80640000 && "			\
 	"esbc_validate 0x80680000; "			\
-	"sf read 0x80a00000 0xa00000 0x300000; "	\
+	"sf read 0x80a00000 0xa00000 0x200000; "	\
 	"sf read 0x80e00000 0xe00000 0x100000; "	\
 	"fsl_mc start mc 0x80a00000 0x80e00000 \0"
 #elif defined(CONFIG_SD_BOOT)
 #define MC_INIT_CMD                             \
-	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
-	"mmc read 0x80100000 0x7000 0x800;"	\
+	"mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \
+	"mmc read 0x80e00000 0x7000 0x800;"	\
 	"env exists secureboot && "		\
 	"mmc read 0x80640000 0x3200 0x20 && "	\
 	"mmc read 0x80680000 0x3400 0x20 && "	\
 	"esbc_validate 0x80640000 && "		\
 	"esbc_validate 0x80680000 ;"		\
-	"fsl_mc start mc 0x80000000 0x80100000\0" \
+	"fsl_mc start mc 0x80a00000 0x80e00000\0" \
 	"mcmemsize=0x70000000\0"
 #else
 #define MC_INIT_CMD				\