blk: Rework guard around part_init call

The function part_init() will only be built when we have both
CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE set.  Protect the call to
this function with both of these tests now.

Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Marek Behún <marek.behun@nic.cz>
Cc: Vanessa Maegima <vanessa.maegima@nxp.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

common/spl/Kconfig

@@ -449,6 +449,7 @@ config SPL_LIBCOMMON_SUPPORT
 
 config SPL_LIBDISK_SUPPORT
 	bool "Support disk partitions"
+	select PARTITIONS
 	help
 	  Enable support for disk partitions within SPL. 'Disk' is something
 	  of a misnomer as it includes non-spinning media such as flash (as
@@ -480,6 +481,7 @@ config SPL_DM_MAILBOX
 config SPL_MMC_SUPPORT
 	bool "Support MMC"
 	depends on MMC
+	select HAVE_BLOCK_DEVICE
 	help
 	  Enable support for MMC (Multimedia Card) within SPL. This enables
 	  the MMC protocol implementation and allows any enabled drivers to
@@ -754,6 +756,7 @@ config SPL_THERMAL
 
 config SPL_USB_HOST_SUPPORT
 	bool "Support USB host drivers"
+	select HAVE_BLOCK_DEVICE
 	help
 	  Enable access to USB (Universal Serial Bus) host devices so that
 	  SPL can load U-Boot from a connected USB peripheral, such as a USB

configs/evb-rk3036_defconfig

@@ -32,6 +32,7 @@ CONFIG_SPL_PARTITION_UUIDS=y
 CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk"
 CONFIG_REGMAP=y
 CONFIG_SYSCON=y
+# CONFIG_SPL_BLK is not set
 CONFIG_CLK=y
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0

configs/kylin-rk3036_defconfig

@@ -30,6 +30,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_REGMAP=y
 CONFIG_SYSCON=y
+# CONFIG_SPL_BLK is not set
 CONFIG_CLK=y
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0

doc/driver-model/MIGRATION.txt

@@ -44,7 +44,9 @@ Deadline: 2019.07
 In concert with maintainers migrating their block device usage to the
 appropriate DM driver, CONFIG_BLK needs to be set as well.  The final deadline
 here coincides with the final deadline for migration of the various block
-subsystems.
+subsystems.  At this point we will be able to audit and correct the logic in
+Kconfig around using CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE and make
+use of CONFIG_BLK / CONFIG_SPL_BLK as needed.
 
 CONFIG_DM_SPI
 CONFIG_DM_SPI_FLASH

drivers/Makefile

@@ -53,8 +53,7 @@ obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
 obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
-obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
-obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
+obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
 obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
 obj-$(CONFIG_SPL_THERMAL) += thermal/
 

drivers/block/Makefile

@@ -9,6 +9,8 @@ ifndef CONFIG_$(SPL_)BLK
 obj-y += blk_legacy.o
 endif
 
+ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_IDE) += ide.o
+endif
 obj-$(CONFIG_SANDBOX) += sandbox.o
 obj-$(CONFIG_$(SPL_TPL_)BLOCK_CACHE) += blkcache.o

drivers/block/blk-uclass.c

@@ -639,7 +639,7 @@ int blk_unbind_all(int if_type)
 
 static int blk_post_probe(struct udevice *dev)
 {
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)
+#if defined(CONFIG_PARTITIONS) && defined(CONFIG_HAVE_BLOCK_DEVICE)
 	struct blk_desc *desc = dev_get_uclass_platdata(dev);
 
 	part_init(desc);

scripts/Makefile.spl

@@ -81,9 +81,11 @@ libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
 else
 libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
 libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
+ifdef CONFIG_SPL_FRAMEWORK
+libs-$(CONFIG_PARTITIONS) += disk/
+endif
 endif
 
-libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
 libs-y += drivers/
 libs-$(CONFIG_SPL_USB_GADGET_SUPPORT) += drivers/usb/dwc3/
 libs-y += dts/