pinctrl: mvebu: Enable support for the Armada 37xx pinctrl driver

To enable support for the Armada 37xx pinctrl driver, we need to
change the Kconfig symbol for the Armada 7k/8k pinctrl driver and its
dependencies to distinguish between both platforms and drivers.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>

configs/mvebu_db-88f7040-nand_defconfig

@@ -7,7 +7,6 @@ CONFIG_SMBIOS_PRODUCT_NAME=""
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_BOARD_LATE_INIT=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_ARCH_EARLY_INIT_R=y
@@ -16,12 +15,12 @@ CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
-CONFIG_CMD_NAND=y
 # CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y
@@ -31,6 +30,7 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_MVEBU_BUBT=y
+CONFIG_MVEBU_NAND_BOOT=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
@@ -45,18 +45,18 @@ CONFIG_MISC=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_XENON=y
+CONFIG_NAND_PXA3XX=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_MVEBU_NAND_BOOT=y
-CONFIG_NAND_PXA3XX=y
 CONFIG_PHYLIB=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_PCIE_DW_MVEBU=y
 CONFIG_MVEBU_COMPHY_SUPPORT=y
 CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_8K=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_BASE=0xf0512000

configs/mvebu_db-88f7040_defconfig

@@ -54,6 +54,7 @@ CONFIG_DM_PCI=y
 CONFIG_PCIE_DW_MVEBU=y
 CONFIG_MVEBU_COMPHY_SUPPORT=y
 CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_8K=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_BASE=0xf0512000

configs/mvebu_db-88f8040_defconfig

@@ -54,6 +54,7 @@ CONFIG_DM_PCI=y
 CONFIG_PCIE_DW_MVEBU=y
 CONFIG_MVEBU_COMPHY_SUPPORT=y
 CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_8K=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_BASE=0xf0512000

configs/mvebu_mcbin-88f8040_defconfig

@@ -57,6 +57,7 @@ CONFIG_DM_PCI=y
 CONFIG_PCIE_DW_MVEBU=y
 CONFIG_MVEBU_COMPHY_SUPPORT=y
 CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_8K=y
 CONFIG_DM_REGULATOR_FIXED=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DEBUG_UART=y

drivers/pinctrl/Makefile

@@ -17,7 +17,7 @@ obj-$(CONFIG_PINCTRL_UNIPHIER)	+= uniphier/
 obj-$(CONFIG_PINCTRL_PIC32)	+= pinctrl_pic32.o
 obj-$(CONFIG_PINCTRL_EXYNOS)	+= exynos/
 obj-$(CONFIG_PINCTRL_MESON)	+= meson/
-obj-$(CONFIG_PINCTRL_MVEBU)	+= mvebu/
+obj-$(CONFIG_ARCH_MVEBU)	+= mvebu/
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
 obj-$(CONFIG_PINCTRL_STI)	+= pinctrl-sti.o
 obj-$(CONFIG_PINCTRL_STM32)	+= pinctrl_stm32.o

drivers/pinctrl/mvebu/Kconfig

-config PINCTRL_MVEBU
-	depends on ARCH_MVEBU
-	bool
-	default y
+if ARCH_MVEBU
+
+config PINCTRL_ARMADA_37XX
+	depends on ARMADA_3700
+	bool "Armada 37xx pin control driver"
+	help
+	   Support pin multiplexing and pin configuration control on
+	   Marvell's Armada-37xx SoC.
+
+config PINCTRL_ARMADA_8K
+	depends on ARMADA_8K
+	bool "Armada 7k/8k pin control driver"
 	help
 	   Support pin multiplexing and pin configuration control on
 	   Marvell's Armada-8K SoC.
+
+endif

drivers/pinctrl/mvebu/Makefile

@@ -4,4 +4,5 @@
 # SPDX-License-Identifier:	GPL-2.0
 # https://spdx.org/licenses
 
-obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
+obj-$(CONFIG_PINCTRL_ARMADA_37XX) += pinctrl-armada-37xx.o
+obj-$(CONFIG_PINCTRL_ARMADA_8K)	+= pinctrl-mvebu.o