Rename SPL_MUSB_NEW_SUPPORT to SPL_MUSB_NEW

Rename this option so that CONFIG_IS_ENABLED can be used with it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

arch/arm/mach-omap2/am33xx/board.c

@@ -209,7 +209,7 @@ int cpu_mmc_init(struct bd_info *bis)
 #if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \
 	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \
 	(!CONFIG_IS_ENABLED(DM_USB) || !CONFIG_IS_ENABLED(OF_CONTROL)) && \
-	(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_MUSB_NEW_SUPPORT))
+	(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_MUSB_NEW))
 
 static struct musb_hdrc_config musb_config = {
 	.multipoint     = 1,

arch/arm/mach-omap2/boot-common.c

@@ -205,7 +205,7 @@ void spl_board_init(void)
 #if defined(CONFIG_SPL_I2C_SUPPORT) && !CONFIG_IS_ENABLED(DM_I2C)
 	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
-#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
+#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW)
 	arch_misc_init();
 #endif
 #if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)

common/spl/Kconfig

@@ -761,7 +761,7 @@ config SPL_MTD_SUPPORT
 	  devices. See SPL_NAND_SUPPORT and SPL_ONENAND_SUPPORT for how
 	  to enable specific MTD drivers.
 
-config SPL_MUSB_NEW_SUPPORT
+config SPL_MUSB_NEW
 	bool "Support new Mentor Graphics USB"
 	help
 	  Enable support for Mentor Graphics USB in SPL. This is a new

configs/am335x_boneblack_vboot_defconfig

@@ -19,7 +19,7 @@ CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_bootcmd"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_ARCH_MISC_INIT=y
-CONFIG_SPL_MUSB_NEW_SUPPORT=y
+CONFIG_SPL_MUSB_NEW=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_NET_SUPPORT=y
 CONFIG_SPL_NET_VCI_STRING="AM33xx U-Boot SPL"

configs/am335x_evm_defconfig

@@ -17,7 +17,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_ETH=y
 # CONFIG_SPL_FS_EXT4 is not set
 CONFIG_SPL_MTD_SUPPORT=y
-CONFIG_SPL_MUSB_NEW_SUPPORT=y
+CONFIG_SPL_MUSB_NEW=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_BASE=y

configs/am335x_guardian_defconfig

@@ -31,7 +31,7 @@ CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_ETH=y
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MUSB_NEW_SUPPORT=y
+CONFIG_SPL_MUSB_NEW=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_BASE=y

drivers/Makefile

@@ -53,7 +53,7 @@ obj-$(CONFIG_SPL_DMA) += dma/
 obj-$(CONFIG_SPL_ETH) += net/
 obj-$(CONFIG_SPL_ETH) += net/phy/
 obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
-obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
+obj-$(CONFIG_SPL_MUSB_NEW) += usb/musb-new/
 obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
 obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
 obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/