Merge branch 'master' of /home/wd/git/u-boot/master

MAINTAINERS

@@ -551,6 +551,10 @@ Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
 
 	meesc		ARM926EJS (AT91SAM9263 SoC)
 
+Sedji Gaouaou<sedji.gaouaou@atmel.com>
+	at91sam9g10ek		ARM926EJS (AT91SAM9G10 SoC)	
+	at91sam9m10g45ek	ARM926EJS (AT91SAM9G45 SoC)
+
 Marius Grger <mag@sysgo.de>
 
 	impa7		ARM720T (EP7211)

MAKEALL

@@ -579,24 +579,26 @@ LIST_ARM_CORTEX_A8="		\
 ## AT91 Systems
 #########################################################################
 
-LIST_at91="		\
-	afeb9260	\
-	at91cap9adk	\
-	at91rm9200dk	\
-	at91rm9200ek	\
-	at91sam9260ek	\
-	at91sam9261ek	\
-	at91sam9263ek	\
-	at91sam9g20ek	\
-	at91sam9rlek	\
-	cmc_pu2		\
-	csb637		\
-	kb9202		\
-	meesc		\
-	mp2usb		\
-	m501sk		\
-	pm9261		\
-	pm9263		\
+LIST_at91="			\
+	afeb9260		\
+	at91cap9adk		\
+	at91rm9200dk		\
+	at91rm9200ek		\
+	at91sam9260ek		\
+	at91sam9261ek		\
+	at91sam9263ek		\
+	at91sam9g10ek	\
+	at91sam9g20ek		\
+	at91sam9m10g45ek	\
+	at91sam9rlek		\
+	cmc_pu2			\
+	csb637			\
+	kb9202			\
+	meesc			\
+	mp2usb			\
+	m501sk			\
+	pm9261			\
+	pm9263			\
 "
 
 #########################################################################
@@ -849,6 +851,7 @@ LIST_sh4="		\
 	sh7763rdp	\
 	sh7785lcr	\
 	ap325rxa	\
+	espt		\
 "
 
 LIST_sh="		\

Makefile

@@ -352,7 +352,7 @@ GEN_UBOOT = \
 $(obj)u-boot:		depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)
 		$(GEN_UBOOT)
 ifeq ($(CONFIG_KALLSYMS),y)
-		smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\0"}'` ; \
+		smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 		$(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" -c common/system_map.c -o $(obj)common/system_map.o
 		$(GEN_UBOOT) $(obj)common/system_map.o
 endif
@@ -2752,12 +2752,22 @@ at91sam9xeek_config	:	unconfig
 at91sam9261ek_nandflash_config \
 at91sam9261ek_dataflash_cs0_config \
 at91sam9261ek_dataflash_cs3_config \
-at91sam9261ek_config	:	unconfig
-	@mkdir -p $(obj)include
+at91sam9261ek_config \
+at91sam9g10ek_nandflash_config \
+at91sam9g10ek_dataflash_cs0_config \
+at91sam9g10ek_dataflash_cs3_config \
+at91sam9g10ek_config	:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring 9g10,$@)" ] ; then \
+		echo "#define CONFIG_AT91SAM9G10EK 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... 9G10 Variant" ; \
+	else \
+		echo "#define CONFIG_AT91SAM9261EK 1"	>>$(obj)include/config.h ; \
+	fi;
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
 		$(XECHO) "... with environment variable in NAND FLASH" ; \
-	elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"	>>$(obj)include/config.h ; \
 		$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
 	else \
@@ -2809,6 +2819,31 @@ meesc_config	:	unconfig
 pm9261_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
 
+at91sam9m10g45ek_nandflash_config \
+at91sam9m10g45ek_dataflash_config \
+at91sam9m10g45ek_dataflash_cs0_config \
+at91sam9m10g45ek_config \
+at91sam9g45ekes_nandflash_config \
+at91sam9g45ekes_dataflash_config \
+at91sam9g45ekes_dataflash_cs0_config \
+at91sam9g45ekes_config	:	unconfig
+	@mkdir -p $(obj)include
+		@if [ "$(findstring 9m10,$@)" ] ; then \
+		echo "#define CONFIG_AT91SAM9M10G45EK 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... 9M10G45 Variant" ; \
+	else \
+		echo "#define CONFIG_AT91SAM9G45EKES 1"	>>$(obj)include/config.h ; \
+	fi;
+
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_ATMEL_SPI 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
+
 pm9263_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
 
@@ -3538,18 +3573,14 @@ sh7763rdp_config  :   unconfig
 xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
 sh7785lcr_32bit_config \
 sh7785lcr_config  :   unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_SH7785LCR 1" >> include/config.h
+	@mkdir -p $(obj)include
+	@mkdir -p $(obj)board/renesas/sh7785lcr
+	@echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
 	@if [ "$(findstring 32bit, $@)" ] ; then \
 		echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
-		cp $(obj)board/renesas/sh7785lcr/u-boot_32bit \
-			$(obj)board/renesas/sh7785lcr/u-boot.lds ; \
 		echo "TEXT_BASE = 0x8ff80000" > \
 			$(obj)board/renesas/sh7785lcr/config.tmp ; \
 		  $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
-	else \
-		cp $(obj)board/renesas/sh7785lcr/u-boot_29bit \
-			$(obj)board/renesas/sh7785lcr/u-boot.lds ; \
 	fi
 	@$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
 
@@ -3558,6 +3589,11 @@ ap325rxa_config  :   unconfig
 	@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
 
+espt_config  :   unconfig
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 espt
+
 #========================================================================
 # SPARC
 #========================================================================
@@ -3636,7 +3672,6 @@ clobber:	clean
 	@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
 	@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
 	@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
-	@[ ! -d $(obj)api_examples ] || find $(obj)api_examples -name "*" -type l -print | xargs rm -f
 
 ifeq ($(OBJTREE),$(SRCTREE))
 mrproper \

api_examples/.gitignore

-crc32.c
-ctype.c
 demo
 demo.bin
-ppcstring.S
-string.c
-vsprintf.c

api_examples/Makefile

@@ -29,74 +29,56 @@ endif
 
 include $(TOPDIR)/config.mk
 
-ELF-$(CONFIG_API) += demo
-BIN-$(CONFIG_API) += demo.bin
-ELF	:= $(ELF-y)
-BIN	:= $(BIN-y)
-
-#CFLAGS += -v
-
-COBJS-$(CONFIG_API) += $(ELF:=.o)
-SOBJS-$(CONFIG_API) += crt0.o
+# Resulting ELF and binary exectuables will be named demo and demo.bin
+OUTPUT-$(CONFIG_API) = $(obj)demo
+OUTPUT = $(OUTPUT-y)
+
+# Source files located in the api_examples directory
+SOBJ_FILES-$(CONFIG_API) += crt0.o
+COBJ_FILES-$(CONFIG_API) += demo.o
+COBJ_FILES-$(CONFIG_API) += glue.o
+COBJ_FILES-$(CONFIG_API) += libgenwrap.o
+
+# Source files which exist outside the api_examples directory
+EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/crc32.o
+EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/ctype.o
+EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/string.o
+EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/vsprintf.o
 ifeq ($(ARCH),ppc)
-SOBJS-$(CONFIG_API) += ppcstring.o
+EXT_SOBJ_FILES-$(CONFIG_API) += lib_ppc/ppcstring.o
 endif
-COBJS	:= $(COBJS-y)
-SOBJS	:= $(SOBJS-y)
-
-LIB	= $(obj)libglue.a
-LIBCOBJS-$(CONFIG_API) += glue.o crc32.o ctype.o string.o vsprintf.o \
-				libgenwrap.o
-LIBCOBJS := $(LIBCOBJS-y)
 
-LIBOBJS	= $(addprefix $(obj),$(SOBJS) $(LIBCOBJS))
+# Create a list of source files so their dependencies can be auto-generated
+SRCS	+= $(addprefix $(SRCTREE)/,$(EXT_COBJ_FILES-y:.o=.c))
+SRCS	+= $(addprefix $(SRCTREE)/,$(EXT_SOBJ_FILES-y:.o=.S))
+SRCS	+= $(addprefix $(SRCTREE)/api_examples/,$(COBJ_FILES-y:.o=.c))
+SRCS	+= $(addprefix $(SRCTREE)/api_examples/,$(SOBJ_FILES-y:.o=.S))
 
-SRCS	:= $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(SOBJS:.o=.S)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-ELF	:= $(addprefix $(obj),$(ELF))
-BIN	:= $(addprefix $(obj),$(BIN))
+# Create a list of object files to be compiled
+OBJS	+= $(addprefix $(obj),$(SOBJ_FILES-y))
+OBJS	+= $(addprefix $(obj),$(COBJ_FILES-y))
+OBJS	+= $(addprefix $(obj),$(notdir $(EXT_COBJ_FILES-y)))
+OBJS	+= $(addprefix $(obj),$(notdir $(EXT_SOBJ_FILES-y)))
 
 gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
 
 CPPFLAGS += -I..
 
-all:	$(obj).depend $(OBJS) $(LIB) $(ELF) $(BIN)
+all:	$(obj).depend $(OUTPUT)
 
 #########################################################################
-$(LIB):	$(obj).depend $(LIBOBJS)
-		$(AR) $(ARFLAGS) $@ $(LIBOBJS)
-
-$(ELF):
-$(obj)%:	$(obj)%.o $(LIB)
-		$(LD) $(obj)crt0.o -Ttext $(LOAD_ADDR) \
-			-o $@ $< $(LIB) \
-			-L$(gcclibdir) -lgcc
-
-$(BIN):
-$(obj)%.bin:	$(obj)%
-		$(OBJCOPY) -O binary $< $@ 2>/dev/null
 
-$(obj)crc32.c:
-	@rm -f $(obj)crc32.c
-	ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c
+$(OUTPUT):	$(OBJS)
+		$(LD) -Ttext $(LOAD_ADDR) -o $@ $^ -L$(gcclibdir) -lgcc
+		$(OBJCOPY) -O binary $@ $(OUTPUT).bin 2>/dev/null
 
-$(obj)ctype.c:
-	@rm -f $(obj)ctype.c
-	ln -s $(src)../lib_generic/ctype.c $(obj)ctype.c
+# Rule to build generic library C files
+$(obj)%.o: $(SRCTREE)/lib_generic/%.c
+	$(CC) -g $(CFLAGS) -c -o $@ $<
 
-$(obj)string.c:
-	@rm -f $(obj)string.c
-	ln -s $(src)../lib_generic/string.c $(obj)string.c
-
-$(obj)vsprintf.c:
-	@rm -f $(obj)vsprintf.c
-	ln -s $(src)../lib_generic/vsprintf.c $(obj)vsprintf.c
-
-ifeq ($(ARCH),ppc)
-$(obj)ppcstring.S:
-	@rm -f $(obj)ppcstring.S
-	ln -s $(src)../lib_ppc/ppcstring.S $(obj)ppcstring.S
-endif
+# Rule to build architecture-specific library assembly files
+$(obj)%.o: $(SRCTREE)/lib_$(ARCH)/%.S
+	$(CC) -g $(CFLAGS) -c -o $@ $<
 
 #########################################################################
 

board/armltd/versatile/Makefile

@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= versatile.o flash.o
+COBJS	:= versatile.o
 SOBJS	:= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)

board/armltd/versatile/flash.c

-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/* Board support for 1 or 2 flash devices */
-#define FLASH_PORT_WIDTH32
-#undef FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH		ushort
-#define FLASH_PORT_WIDTHV		vu_short
-#define SWAP(x)			__swab16(x)
-#else
-#define FLASH_PORT_WIDTH		ulong
-#define FLASH_PORT_WIDTHV		vu_long
-#define SWAP(x)			__swab32(x)
-#endif
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-
-/* Flash Organization Structure */
-typedef struct OrgDef {
-	unsigned int sector_number;
-	unsigned int sector_size;
-} OrgDef;
-
-
-/* Flash Organizations */
-OrgDef OrgIntel_28F256K3[] = {
-	{256, 128 * 1024},		/* 256 * 128kBytes sectors */
-};
-
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-unsigned long flash_init (void);
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-void flash_print_info (flash_info_t * info);
-void flash_unprotect_sectors (FPWV * addr);
-int flash_erase (flash_info_t * info, int s_first, int s_last);
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-
-/*-----------------------------------------------------------------------
- */
-
-static void flash_vpp(int on)
-{
-	unsigned int tmp;
-
-	tmp = *(unsigned int *)(VERSATILE_FLASHCTRL);
-
-	if (on)
-	    tmp |= VERSATILE_FLASHPROG_FLVPPEN;
-	else
-	    tmp &= ~VERSATILE_FLASHPROG_FLVPPEN;
-
-	*(unsigned int *)(VERSATILE_FLASHCTRL) = tmp;
-}
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		switch (i) {
-		case 0:
-		        flash_vpp(1);
-			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-			flash_vpp(0);
-			break;
-		default:
-			panic ("configured too many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect (FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE,
-			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-	OrgDef *pOrgDef;
-
-	pOrgDef = OrgIntel_28F256K3;
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			if (i > 255) {
-				info->start[i] = base + (i * 0x8000);
-				info->protect[i] = 0;
-			} else {
-				info->start[i] = base +
-						(i * PHYS_FLASH_SECT_SIZE);
-				info->protect[i] = 0;
-			}
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F256L18T:
-		printf ("FLASH 28F256L18T\n");
-		break;
-	case FLASH_28F256K3:
-		printf ("FLASH 28F256K3\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
-{
-	volatile FPW value;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = (FPW) 0x00AA00AA;
-	addr[0x2AAA] = (FPW) 0x00550055;
-	addr[0x5555] = (FPW) 0x00900090;
-
-	mb ();
-	value = addr[0];
-	switch (value) {
-
-	case (FPW) INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-		return (0);		/* no or unknown flash  */
-	}
-
-	mb ();
-	value = addr[1];	/* device ID        */
-	switch (value) {
-
-	case (FPW) (INTEL_ID_28F256L18T):
-		info->flash_id += FLASH_28F256L18T;
-		info->sector_count = 259;
-		info->size = 0x02000000;
-		break;			/* => 32 MB     */
-
-	case (FPW)(INTEL_ID_28F256K3):
-		info->flash_id += FLASH_28F256K3;
-		info->sector_count = 256;
-		info->size = 0x02000000;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-
-	return (info->size);
-}
-
-
-/* unprotects a sector for write and erase
- * on some intel parts, this unprotects the entire chip, but it
- * wont hurt to call this additional times per sector...
- */
-void flash_unprotect_sectors (FPWV * addr)
-{
-#define PD_FINTEL_WSMS_READY_MASK    0x0080
-
-	*addr = (FPW) 0x00500050;	/* clear status register */
-
-	/* this sends the clear lock bit command */
-	*addr = (FPW) 0x00600060;
-	*addr = (FPW) 0x00D000D0;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong type, start, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-				info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-				prot);
-	} else {
-		printf ("\n");
-	}
-
-	flash_vpp(1);
-
-	start = get_timer (0);
-	last = start;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			FPWV *addr = (FPWV *) (info->start[sect]);
-			FPW status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			flash_unprotect_sectors (addr);
-
-			/* arm simple, non interrupt dependent timer */
-			reset_timer_masked ();
-
-			*addr = (FPW) 0x00500050;/* clear status register */
-			*addr = (FPW) 0x00200020;/* erase setup */
-			*addr = (FPW) 0x00D000D0;/* erase confirm */
-
-			while (((status =
-				*addr) & (FPW) 0x00800080) !=
-				(FPW) 0x00800080) {
-					if (get_timer_masked () >
-					CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					/* suspend erase     */
-					*addr = (FPW) 0x00B000B0;
-					/* reset to read mode */
-					*addr = (FPW) 0x00FF00FF;
-					rcode = 1;
-					break;
-				}
-			}
-
-			/* clear status register cmd.   */
-			*addr = (FPW) 0x00500050;
-			*addr = (FPW) 0x00FF00FF;/* resest to read mode */
-			printf (" done\n");
-		}
-	}
-
-	flash_vpp(0);
-
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	FPW data;
-	int count, i, l, rc, port_width;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return 4;
-	}
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
-	wp = (addr & ~1);
-	port_width = 2;
-#else
-	wp = (addr & ~3);
-	port_width = 4;
-#endif
-
-	flash_vpp(1);
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < port_width && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			flash_vpp(0);
-			return (rc);
-		}
-		wp += port_width;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	count = 0;
-	while (cnt >= port_width) {
-		data = 0;
-		for (i = 0; i < port_width; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			flash_vpp(0);
-			return (rc);
-		}
-		wp += port_width;
-		cnt -= port_width;
-		if (count++ > 0x800) {
-			spin_wheel ();
-			count = 0;
-		}
-	}
-
-	if (cnt == 0) {
-		flash_vpp(0);
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	rc = write_data (info, wp, SWAP (data));
-
-	flash_vpp(0);
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
-	FPWV *addr = (FPWV *) dest;
-	ulong status;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%lx)\n", (ulong) addr, (ulong) *addr);
-		return (2);
-	}
-
-	flash_vpp(1);
-
-	flash_unprotect_sectors (addr);
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-	*addr = (FPW) 0x00400040;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked ();
-
-	/* wait while polling the status register */
-	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
-			flash_vpp(0);
-			return (1);
-		}
-	}
-	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
-	flash_vpp(0);
-	return (0);
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}

board/atmel/at91sam9261ek/at91sam9261ek.c

@@ -57,6 +57,16 @@ static void at91sam9261ek_nand_hw_init(void)
 		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
 	/* Configure SMC CS3 for NAND/SmartMedia */
+#ifdef CONFIG_AT91SAM9G10EK
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) |
+		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+#else
 	at91_sys_write(AT91_SMC_SETUP(3),
 		       AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
 		       AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
@@ -65,6 +75,7 @@ static void at91sam9261ek_nand_hw_init(void)
 		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
 	at91_sys_write(AT91_SMC_CYCLE(3),
 		       AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+#endif
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
@@ -92,6 +103,21 @@ static void at91sam9261ek_nand_hw_init(void)
 static void at91sam9261ek_dm9000_hw_init(void)
 {
 	/* Configure SMC CS2 for DM9000 */
+#ifdef CONFIG_AT91SAM9G10EK
+	at91_sys_write(AT91_SMC_SETUP(2),
+		       AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(2),
+		       AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) |
+		       AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8));
+	at91_sys_write(AT91_SMC_CYCLE(2),
+		       AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20));
+	at91_sys_write(AT91_SMC_MODE(2),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+		       AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
+		       AT91_SMC_TDF_(1));
+#else
 	at91_sys_write(AT91_SMC_SETUP(2),
 		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
 		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
@@ -105,6 +131,7 @@ static void at91sam9261ek_dm9000_hw_init(void)
 		       AT91_SMC_EXNWMODE_DISABLE |
 		       AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
 		       AT91_SMC_TDF_(1));
+#endif
 
 	/* Configure Reset signal as output */
 	at91_set_gpio_output(AT91_PIN_PC10, 0);
@@ -169,7 +196,11 @@ static void at91sam9261ek_lcd_hw_init(void)
 
 	at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
 
+#ifdef CONFIG_AT91SAM9G10EK
+	gd->fb_base = CONFIG_AT91SAM9G10_LCD_BASE;
+#else
 	gd->fb_base = AT91SAM9261_SRAM_BASE;
+#endif
 }
 
 #ifdef CONFIG_LCD_INFO
@@ -207,8 +238,13 @@ int board_init(void)
 	/* Enable Ctrlc */
 	console_init_f();
 
+#ifdef CONFIG_AT91SAM9G10EK
+	/* arch number of AT91SAM9G10EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK;
+#else
 	/* arch number of AT91SAM9261EK-Board */
 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
+#endif
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 

board/atmel/at91sam9m10g45ek/Makefile

+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9m10g45ek.o
+COBJS-y += led.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c

+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9g45.h>
+#include <asm/arch/at91sam9_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9m10g45ek_nand_hw_init(void)
+{
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) |
+		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(3));
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void at91sam9m10g45ek_macb_hw_init(void)
+{
+	unsigned long rstc;
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC);
+
+	/*
+	 * Disable pull-up on:
+	 *	RXDV (PA15) => PHY normal mode (not Test mode)
+	 * 	ERX0 (PA12) => PHY ADDR0
+	 *	ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
+	 *
+	 * PHY has internal pull-down
+	 */
+	writel(pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA12) |
+	       pin_to_mask(AT91_PIN_PA13),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
+
+	rstc = at91_sys_read(AT91_RSTC_MR);
+
+	/* Need to reset PHY -> 500ms reset */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     (AT91_RSTC_ERSTL & (0x0D << 8)) |
+				     AT91_RSTC_URSTEN);
+
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+	/* Wait for end hardware reset */
+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+	/* Restore NRST value */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     (rstc) |
+				     AT91_RSTC_URSTEN);
+
+	/* Re-enable pull-up */
+	writel(pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA12) |
+	       pin_to_mask(AT91_PIN_PA13),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+
+	at91_macb_hw_init();
+}
+#endif
+
+#ifdef CONFIG_LCD
+
+vidinfo_t panel_info = {
+	vl_col:		480,
+	vl_row:		272,
+	vl_clk:		9000000,
+	vl_sync:	ATMEL_LCDC_INVLINE_NORMAL |
+			ATMEL_LCDC_INVFRAME_NORMAL,
+	vl_bpix:	3,
+	vl_tft:		1,
+	vl_hsync_len:	45,
+	vl_left_margin:	1,
+	vl_right_margin:1,
+	vl_vsync_len:	1,
+	vl_upper_margin:40,
+	vl_lower_margin:1,
+	mmio:		AT91SAM9G45_LCDC_BASE,
+};
+
+
+void lcd_enable(void)
+{
+	at91_set_A_periph(AT91_PIN_PE6, 1);	/* power up */
+}
+
+void lcd_disable(void)
+{
+	at91_set_A_periph(AT91_PIN_PE6, 0);	/* power down */
+}
+
+static void at91sam9m10g45ek_lcd_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PE0, 0);	/* LCDDPWR */
+	at91_set_A_periph(AT91_PIN_PE2, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PE3, 0);	/* LCDVSYNC */
+	at91_set_A_periph(AT91_PIN_PE4, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PE5, 0);	/* LCDDOTCK */
+
+	at91_set_A_periph(AT91_PIN_PE7, 0);	/* LCDD0 */
+	at91_set_A_periph(AT91_PIN_PE8, 0);	/* LCDD1 */
+	at91_set_A_periph(AT91_PIN_PE9, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PE10, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PE11, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PE12, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PE13, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PE14, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PE15, 0);	/* LCDD8 */
+	at91_set_A_periph(AT91_PIN_PE16, 0);	/* LCDD9 */
+	at91_set_A_periph(AT91_PIN_PE17, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PE18, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PE19, 0);	/* LCDD12 */
+	at91_set_B_periph(AT91_PIN_PE20, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PE22, 0);	/* LCDD15 */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* LCDD16 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* LCDD17 */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* LCDD18 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* LCDD19 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* LCDD20 */
+	at91_set_B_periph(AT91_PIN_PE28, 0);	/* LCDD21 */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* LCDD22 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* LCDD23 */
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC);
+
+	gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE;
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, get_cpu_clk_rate()));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
+#endif
+
+int board_init(void)
+{
+	/* Enable Ctrlc */
+	console_init_f();
+
+	/* arch number of AT91SAM9M10G45EK-Board */
+#ifdef CONFIG_AT91SAM9M10G45EK
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK;
+#elif defined CONFIG_AT91SAM9G45EKES
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES;
+#endif
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+	at91sam9m10g45ek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_ATMEL_SPI
+	at91_spi0_hw_init(1 << 4);
+#endif
+
+#ifdef CONFIG_MACB
+	at91sam9m10g45ek_macb_hw_init();
+#endif
+
+#ifdef CONFIG_LCD
+	at91sam9m10g45ek_lcd_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+	/*
+	 * Initialize ethernet HW addr prior to starting Linux,
+	 * needed for nfsroot
+	 */
+	eth_init(gd->bd);
+#endif
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
+
+/* SPI chip select control */
+#ifdef CONFIG_ATMEL_SPI
+#include <spi.h>
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs < 2;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	switch(slave->cs) {
+		case 1:
+			at91_set_gpio_output(AT91_PIN_PB18, 0);
+			break;
+		case 0:
+		default:
+			at91_set_gpio_output(AT91_PIN_PB3, 0);
+			break;
+	}
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	switch(slave->cs) {
+		case 1:
+			at91_set_gpio_output(AT91_PIN_PB18, 1);
+			break;
+		case 0:
+		default:
+			at91_set_gpio_output(AT91_PIN_PB3, 1);
+		break;
+	}
+}
+#endif /* CONFIG_ATMEL_SPI */

board/atmel/at91sam9m10g45ek/config.mk

+TEXT_BASE = 0x73f00000

board/renesas/sh7785lcr/u-boot_32bit → board/atmel/at91sam9m10g45ek/led.c

 /*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- * Copyrigth (c) 2008-2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -13,7 +13,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -22,75 +22,20 @@
  * MA 02111-1307 USA
  */
 
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
+#include <common.h>
+#include <asm/arch/at91sam9g45.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
 
-SECTIONS
+void coloured_LED_init(void)
 {
-	. = 0x88000000 + (128 * 1024 * 1024) - (512 * 1024);
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
 
-	PROVIDE (reloc_dst = .);
+	at91_set_gpio_output(CONFIG_RED_LED, 1);
+	at91_set_gpio_output(CONFIG_GREEN_LED, 1);
 
-	PROVIDE (_ftext = .);
-	PROVIDE (_fcode = .);
-	PROVIDE (_start = .);
-
-	.text :
-	{
-		cpu/sh4/start.o		(.text)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
-		. = ALIGN(8192);
-		*(.text)
-		. = ALIGN(4);
-	} =0xFF
-	PROVIDE (_ecode = .);
-	.rodata :
-	{
-		*(.rodata)
-		. = ALIGN(4);
-	}
-	PROVIDE (_etext = .);
-
-
-	PROVIDE (_fdata = .);
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	}
-	PROVIDE (_edata = .);
-
-	PROVIDE (_fgot = .);
-	.got :
-	{
-		*(.got)
-		. = ALIGN(4);
-	}
-	PROVIDE (_egot = .);
-
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
-	}
-	PROVIDE (__u_boot_cmd_end = .);
-
-	PROVIDE (reloc_dst_end = .);
-	/* _reloc_dst_end = .; */
-
-	PROVIDE (bss_start = .);
-	PROVIDE (__bss_start = .);
-	.bss :
-	{
-		*(.bss)
-		. = ALIGN(4);
-	}
-	PROVIDE (bss_end = .);
-
-	PROVIDE (_end = .);
+	at91_set_gpio_value(CONFIG_RED_LED, 0);
+	at91_set_gpio_value(CONFIG_GREEN_LED, 1);
 }

board/espt/Makefile

+#
+# Copyright (C) 2009 Renesas Solutions Corp.
+# Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+#
+# board/espt/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= espt.o
+SOBJS	:= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/espt/config.mk

+#
+# board/espt/config.mk
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+
+TEXT_BASE = 0x8FFC0000

board/renesas/sh7785lcr/u-boot_29bit → board/espt/espt.c

 /*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- * Copyrigth (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
+ * board/espt/espt.c
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -22,75 +20,31 @@
  * MA 02111-1307 USA
  */
 
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
 
-SECTIONS
+int checkboard(void)
 {
-	. = 0x08000000 + (128 * 1024 * 1024) - (512 * 1024);
-
-	PROVIDE (reloc_dst = .);
-
-	PROVIDE (_ftext = .);
-	PROVIDE (_fcode = .);
-	PROVIDE (_start = .);
-
-	.text :
-	{
-		cpu/sh4/start.o		(.text)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
-		. = ALIGN(8192);
-		*(.text)
-		. = ALIGN(4);
-	} =0xFF
-	PROVIDE (_ecode = .);
-	.rodata :
-	{
-		*(.rodata)
-		. = ALIGN(4);
-	}
-	PROVIDE (_etext = .);
-
-
-	PROVIDE (_fdata = .);
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	}
-	PROVIDE (_edata = .);
-
-	PROVIDE (_fgot = .);
-	.got :
-	{
-		*(.got)
-		. = ALIGN(4);
-	}
-	PROVIDE (_egot = .);
+	puts("BOARD: ESPT-GIGA\n");
+	return 0;
+}
 
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
-	}
-	PROVIDE (__u_boot_cmd_end = .);
+int board_init(void)
+{
+	return 0;
+}
 
-	PROVIDE (reloc_dst_end = .);
-	/* _reloc_dst_end = .; */
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
 
-	PROVIDE (bss_start = .);
-	PROVIDE (__bss_start = .);
-	.bss :
-	{
-		*(.bss)
-		. = ALIGN(4);
-	}
-	PROVIDE (bss_end = .);
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+	return 0;
+}
 
-	PROVIDE (_end = .);
+void led_set_state(unsigned short value)
+{
 }

board/espt/lowlevel_init.S

+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * board/espt/lowlevel_init.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <asm/macro.h>
+
+	.global	lowlevel_init
+
+	.text
+	.align	2
+
+lowlevel_init:
+
+	write32 WDTCSR_A, WDTCSR_D
+
+	write32 WDTST_A, WDTST_D
+
+	write32 WDTBST_A, WDTBST_D
+
+	write32 CCR_A, CCR_CACHE_ICI_D
+
+	write32 MMUCR_A, MMU_CONTROL_TI_D
+
+	write32 MSTPCR0_A, MSTPCR0_D
+
+	write32 MSTPCR1_A, MSTPCR1_D
+
+	write32 RAMCR_A, RAMCR_D
+
+	/*
+	 * Setting infomation from
+	 * original ESPT-GIGA bootloader register
+	 */
+	write32 MMSEL_A, MMSEL_D
+
+	/* dummy */
+	mov.l   @r1, r2
+	mov.l   @r1, r2
+	synco
+
+    write32 BCR_A, BCR_D
+
+    write32 CS0BCR_A, CS0BCR_D
+
+    write32 CS0WCR_A, CS0WCR_D
+
+	/*
+	 * DDR-SDRAM setting
+	 */
+
+	/* set DDR-SDRAM dummy read */
+	write32 MMSEL_A, MMSEL_D
+
+	mov.l	MMSEL_A, r0
+	synco
+	mov.l	@r0, r1
+	synco
+
+	mov.l	CS0_A, r0
+	synco
+	mov.l	@r0, r1
+	synco
+
+	/* set DDR-SDRAM bus/endian etc */
+	write32 MIM_U_A, MIM_U_D
+
+	write32 MIM_L_A, MIM_L_D0
+
+	write32 SDR_L_A, SDR_L_A_D0
+
+	write32 STR_L_A, STR_L_A_D0
+
+	/* DDR-SDRAM access control */
+	write32 MIM_L_A, MIM_L_D1
+
+	write32 SCR_L_A, SCR_L_A_D0
+
+	write32 SCR_L_A, SCR_L_A_D1
+
+	write32 EMRS_A, EMRS_D
+
+	write32 MRS1_A, MRS1_D
+
+	write32 MIM_U_A, MIM_U_D
+
+	write32 MIM_L_A, MIM_L_A_D2
+
+	write32 SCR_L_A, SCR_L_A_D2
+
+	write32 SCR_L_A, SCR_L_A_D2
+
+	write32 MRS2_A, MRS2_D
+
+	/* wait 200us */
+	wait_timer REPEAT_R3
+
+	/* GPIO setting */
+	write16 PSEL0_A, PSEL0_D
+
+	write16 PSEL1_A, PSEL1_D
+
+	write16 PSEL2_A, PSEL2_D
+
+	write16 PSEL3_A, PSEL3_D
+
+	write16 PSEL4_A, PSEL4_D
+
+	write8 PADR_A, PADR_D
+
+	write16 PACR_A, PACR_D
+
+	write8 PBDR_A, PBDR_D
+
+	write16 PBCR_A, PBCR_D
+
+	write8 PCDR_A, PCDR_D
+
+	write16 PCCR_A, PCCR_D
+
+	write8	PDDR_A, PDDR_D
+
+	write16 PDCR_A, PDCR_D
+
+	write16 PECR_A, PECR_D
+
+	write16 PFCR_A, PFCR_D
+
+	write16 PGCR_A, PGCR_D
+
+	write16 PHCR_A, PHCR_D
+
+	write16 PICR_A, PICR_D
+
+	write8 PJDR_A, PJDR_D
+
+	write16 PJCR_A, PJCR_D
+
+	/* wait 50us */
+	wait_timer REPEAT_R3
+
+	write8 PKDR_A, PKDR_D
+
+	write16 PKCR_A, PKCR_D
+
+	write16 PLCR_A, PLCR_D
+
+	write16 PMCR_A, PMCR_D
+
+	write16 PNCR_A, PNCR_D
+
+	write16 POCR_A, POCR_D
+
+
+	/* ICR0 ,ICR1 */
+	write32 ICR0_A, ICR0_D
+
+	write32 ICR1_A, ICR1_D
+
+	/* USB Host */
+	write32 USB_USBHSC_A, USB_USBHSC_D
+
+	write32 CCR_A, CCR_CACHE_D_2
+
+	rts
+	nop
+
+	.align	2
+
+/* GPIO Crontrol Register */
+PACR_A:	.long	0xFFEF0000
+PBCR_A:	.long	0xFFEF0002
+PCCR_A:	.long	0xFFEF0004
+PDCR_A:	.long	0xFFEF0006
+PECR_A:	.long	0xFFEF0008
+PFCR_A:	.long	0xFFEF000A
+PGCR_A:	.long	0xFFEF000C
+PHCR_A:	.long	0xFFEF000E
+PICR_A:	.long	0xFFEF0010
+PJCR_A:	.long	0xFFEF0012
+PKCR_A:	.long	0xFFEF0014
+PLCR_A:	.long	0xFFEF0016
+PMCR_A:	.long	0xFFEF0018
+PNCR_A:	.long	0xFFEF001A
+POCR_A:	.long	0xFFEF001C
+
+/* GPIO Data Register */
+PADR_A:	.long	0xFFEF0020
+PBDR_A:	.long	0xFFEF0022
+PCDR_A:	.long	0xFFEF0024
+PDDR_A:	.long	0xFFEF0026
+PJDR_A:	.long	0xFFEF0032
+PKDR_A:	.long	0xFFEF0034
+
+/* GPIO Set data */
+PADR_D:	.long	0x00000000
+PACR_D:	.long 	0x00001400
+PBDR_D:	.long	0x00000000
+PBCR_D:	.long	0x0000555A
+PCDR_D:	.long	0x00000000
+PCCR_D:	.long	0x00005555
+PDDR_D:	.long	0x00000000
+PDCR_D:	.long	0x00000155
+PECR_D:	.long	0x00000000
+PFCR_D:	.long	0x00000000
+PGCR_D:	.long	0x00000000
+PHCR_D:	.long	0x00000000
+PICR_D:	.long	0x00000800
+PJDR_D:	.long	0x00000006
+PJCR_D:	.long	0x00005A57
+PKDR_D:	.long	0x00000000
+PKCR_D:	.long	0x0000FFF9
+PLCR_D:	.long 	0x0000C330
+PMCR_D:	.long	0x0000FFFF
+PNCR_D:	.long	0x00000242
+POCR_D:	.long	0x00000000
+
+/* Pin Select */
+PSEL0_A:	.long	0xFFEF0070
+PSEL1_A:	.long	0xFFEF0072
+PSEL2_A:	.long	0xFFEF0074
+PSEL3_A:	.long	0xFFEF0076
+PSEL4_A:	.long	0xFFEF0078
+PSEL0_D:	.long	0x0001
+PSEL1_D:	.long	0x2400
+PSEL2_D:	.long	0x0000
+PSEL3_D:	.long	0x2421
+PSEL4_D:	.long	0x0000
+
+MMSEL_A:	.long	0xFE600020
+BCR_A:		.long	0xFF801000
+CS0BCR_A:	.long	0xFF802000
+CS0WCR_A:	.long	0xFF802008
+ICR0_A:		.long	0xFFD00000
+ICR1_A:		.long	0xFFD0001C
+
+MMSEL_D:	.long	0xA5A50000
+BCR_D:		.long	0x05000000
+CS0BCR_D:	.long	0x232306F0
+CS0WCR_D:	.long	0x00011104
+ICR0_D:		.long	0x80C00000
+ICR1_D:		.long	0x00020000
+
+/* RWBT Address */
+WDTST_A:	.long	0xFFCC0000
+WDTCSR_A:	.long	0xFFCC0004
+WDTBST_A:	.long	0xFFCC0008
+/* RWBT Data */
+WDTST_D:	.long	0x5A000FFF
+WDTCSR_D:	.long	0xA5000000
+WDTBST_D:	.long	0x55000000
+
+/* Cache Address */
+CCR_A:		.long	0xFF00001C
+MMUCR_A:	.long	0xFF000010
+RAMCR_A:	.long	0xFF000074
+
+/* Cache Data */
+CCR_CACHE_ICI_D:.long	0x00000800
+CCR_CACHE_D_2:	.long	0x00000103
+MMU_CONTROL_TI_D:.long	0x00000004
+RAMCR_D:	.long	0x00000200
+
+/* Low power mode control Address */
+MSTPCR0_A:	.long	0xFFC80030
+MSTPCR1_A:	.long	0xFFC80038
+/* Low power mode control Data */
+MSTPCR0_D:	.long	0x00000000
+MSTPCR1_D:	.long	0x00000000
+
+REPEAT0_R3:	.long	0x00002000
+REPEAT_R3:	.long	0x00000200
+CS0_A:		.long	0xA8000000
+
+MIM_U_A:	.long	0xFE800008
+MIM_L_A:	.long	0xFE80000C
+SCR_U_A:	.long	0xFE800010
+SCR_L_A:	.long	0xFE800014
+STR_U_A:	.long	0xFE800018
+STR_L_A:	.long	0xFE80001C
+SDR_U_A:	.long	0xFE800030
+SDR_L_A:	.long	0xFE800034
+EMRS_A:		.long	0xFE902000
+MRS1_A:		.long	0xFE900B08
+MRS2_A:		.long	0xFE900308
+
+MIM_U_D:	.long	0x00000000
+MIM_L_D0:	.long	0x04100008
+MIM_L_D1:	.long	0x02EE0009
+MIM_L_D2:	.long	0x02EE0209
+
+SDR_L_A_D0:	.long	0x00000300
+STR_L_A_D0:	.long	0x00010040
+MIM_L_A_D1:	.long	0x04100009
+SCR_L_A_D0:	.long 	0x00000003
+SCR_L_A_D1:	.long 	0x00000002
+MIM_L_A_D2:	.long	0x04100209
+SCR_L_A_D2:	.long	0x00000004
+
+SCR_L_NORMAL:	.long	0x00000000
+SCR_L_NOP:		.long	0x00000001
+SCR_L_PALL:		.long	0x00000002
+SCR_L_CKE_EN:	.long	0x00000003
+SCR_L_CBR:		.long	0x00000004
+
+STR_L_D:	.long	0x000F3980
+SDR_L_D:	.long	0x00000400
+EMRS_D:		.long	0x00000000
+MRS1_D:		.long	0x00000000
+MRS2_D:		.long	0x00000000
+
+/* USB */
+USB_USBHSC_A:	.long	0xFFEC80F0
+USB_USBHSC_D:	.long	0x00000000

board/ms7720se/u-boot.lds

-/*
- * Copyrigth (c) 2007
- * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
-	/*
-	   Base address of internal SDRAM is 0x0C000000.
-	   Although size of SDRAM can be either 16 or 32 MBytes,
-	   we assume 16 MBytes (ie ignore upper half if the full
-	   32 MBytes is present).
-
-	   NOTE: This address must match with the definition of
-	   TEXT_BASE in config.mk (in this directory).
-
-	*/
-	. = 0x8C000000 + (64*1024*1024) - (256*1024);
-
-	PROVIDE (reloc_dst = .);
-
-	PROVIDE (_ftext = .);
-	PROVIDE (_fcode = .);
-	PROVIDE (_start = .);
-
-	.text :
-	{
-		cpu/sh3/start.o		(.text)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
-		. = ALIGN(8192);
-		*(.text)
-		. = ALIGN(4);
-	} =0xFF
-	PROVIDE (_ecode = .);
-	.rodata :
-	{
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-		. = ALIGN(4);
-	}
-	PROVIDE (_etext = .);
-
-
-	PROVIDE (_fdata = .);
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	}
-	PROVIDE (_edata = .);
-
-	PROVIDE (_fgot = .);
-	.got :
-	{
-		*(.got)
-		. = ALIGN(4);
-	}
-	PROVIDE (_egot = .);
-
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
-	}
-	PROVIDE (__u_boot_cmd_end = .);
-
-	PROVIDE (reloc_dst_end = .);
-	/* _reloc_dst_end = .; */
-
-	PROVIDE (bss_start = .);
-	PROVIDE (__bss_start = .);
-	.bss :
-	{
-		*(.bss)
-		. = ALIGN(4);
-	}
-	PROVIDE (bss_end = .);
-
-	PROVIDE (_end = .);
-}

board/ms7722se/u-boot.lds

-/*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
-	/*
-	   Base address of internal SDRAM is 0x0C000000.
-	   Although size of SDRAM can be either 16 or 32 MBytes,
-	   we assume 16 MBytes (ie ignore upper half if the full
-	   32 MBytes is present).
-
-	   NOTE: This address must match with the definition of
-	   TEXT_BASE in config.mk (in this directory).
-
-	*/
-	. = 0x8C000000 + (64*1024*1024) - (256*1024);
-
-	PROVIDE (reloc_dst = .);
-
-	PROVIDE (_ftext = .);
-	PROVIDE (_fcode = .);
-	PROVIDE (_start = .);
-
-	.text :
-	{
-		cpu/sh4/start.o		(.text)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
-		. = ALIGN(8192);
-		*(.text)
-		. = ALIGN(4);
-	} =0xFF
-	PROVIDE (_ecode = .);
-	.rodata :
-	{
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-		. = ALIGN(4);
-	}
-	PROVIDE (_etext = .);
-
-
-	PROVIDE (_fdata = .);
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	}
-	PROVIDE (_edata = .);
-
-	PROVIDE (_fgot = .);
-	.got :
-	{
-		*(.got)
-		. = ALIGN(4);
-	}
-	PROVIDE (_egot = .);
-
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
-	}
-	PROVIDE (__u_boot_cmd_end = .);
-
-	PROVIDE (reloc_dst_end = .);
-	/* _reloc_dst_end = .; */
-
-	PROVIDE (bss_start = .);
-	PROVIDE (__bss_start = .);
-	.bss (NOLOAD) :
-	{
-		*(.bss)
-		. = ALIGN(4);
-	}
-	PROVIDE (bss_end = .);
-
-	PROVIDE (_end = .);
-}

board/ms7750se/u-boot.lds

-/*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
-	/*
-	   Base address of internal SDRAM is 0x0C000000.
-	   Although size of SDRAM can be either 16 or 32 MBytes,
-	   we assume 16 MBytes (ie ignore upper half if the full
-	   32 MBytes is present).
-
-	   NOTE: This address must match with the definition of
-	   TEXT_BASE in config.mk (in this directory).
-
-	*/
-	. = 0x8C000000 + (64*1024*1024) - (256*1024);
-
-	PROVIDE (reloc_dst = .);
-
-	PROVIDE (_ftext = .);
-	PROVIDE (_fcode = .);
-	PROVIDE (_start = .);
-
-	.text :
-	{
-		cpu/sh4/start.o		(.text)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
-		. = ALIGN(8192);
-		*(.text)
-		. = ALIGN(4);
-	} =0xFF
-	PROVIDE (_ecode = .);
-	.rodata :
-	{
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-		. = ALIGN(4);
-	}
-	PROVIDE (_etext = .);
-
-
-	PROVIDE (_fdata = .);
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	}
-	PROVIDE (_edata = .);
-
-	PROVIDE (_fgot = .);
-	.got :
-	{
-		*(.got)
-		. = ALIGN(4);
-	}
-	PROVIDE (_egot = .);
-
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
-	}
-	PROVIDE (__u_boot_cmd_end = .);
-
-	PROVIDE (reloc_dst_end = .);
-	/* _reloc_dst_end = .; */
-
-	PROVIDE (bss_start = .);
-	PROVIDE (__bss_start = .);
-	.bss (NOLOAD) :
-	{
-		*(.bss)
-		. = ALIGN(4);
-	}
-	PROVIDE (bss_end = .);
-
-	PROVIDE (_end = .);
-}

board/omap3/pandora/pandora.h

@@ -107,15 +107,6 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(GPMC_D15),		(IEN  | PTD | DIS | M0)) /*GPMC_D15*/\
  MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
  MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
- MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
- MUX_VAL(CP(GPMC_NCS3),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS3*/\
- MUX_VAL(CP(GPMC_NCS4),		(IDIS | PTU | EN  | M0))\
- MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M1))\
- MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M1))\
- MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTU | EN  | M0))\
- MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTU | EN  | M0))\
  MUX_VAL(CP(GPMC_CLK),		(IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
  MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
  MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
@@ -154,26 +145,26 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(DSS_DATA22),	(IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
  MUX_VAL(CP(DSS_DATA23),	(IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
  /*GPIO based game buttons*/\
- MUX_VAL(CP(CAM_XCLKA),		(IEN  | PTU | DIS | M4)) /*GPIO_96 - LEFT*/\
- MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | DIS | M4)) /*GPIO_97 - L2*/\
- MUX_VAL(CP(CAM_FLD),		(IEN  | PTU | DIS | M4)) /*GPIO_98 - RIGHT*/\
- MUX_VAL(CP(CAM_D0),		(IEN  | PTU | DIS | M4)) /*GPIO_99 - MENU*/\
- MUX_VAL(CP(CAM_D1),		(IEN  | PTU | DIS | M4)) /*GPIO_100 - START*/\
- MUX_VAL(CP(CAM_D2),		(IEN  | PTU | DIS | M4)) /*GPIO_101 - Y*/\
- MUX_VAL(CP(CAM_D3),		(IEN  | PTU | DIS | M4)) /*GPIO_102 - L1*/\
- MUX_VAL(CP(CAM_D4),		(IEN  | PTU | DIS | M4)) /*GPIO_103 - DOWN*/\
- MUX_VAL(CP(CAM_D5),		(IEN  | PTU | DIS | M4)) /*GPIO_104 - SELECT*/\
- MUX_VAL(CP(CAM_D6),		(IEN  | PTU | DIS | M4)) /*GPIO_105 - R1*/\
- MUX_VAL(CP(CAM_D7),		(IEN  | PTU | DIS | M4)) /*GPIO_106 - B*/\
- MUX_VAL(CP(CAM_D8),		(IEN  | PTU | DIS | M4)) /*GPIO_107 - R2*/\
- MUX_VAL(CP(CAM_D10),		(IEN  | PTU | DIS | M4)) /*GPIO_109 - X*/\
- MUX_VAL(CP(CAM_D11),		(IEN  | PTU | DIS | M4)) /*GPIO_110 - UP*/\
- MUX_VAL(CP(CAM_XCLKB),		(IEN  | PTU | DIS | M4)) /*GPIO_111 - A*/\
+ MUX_VAL(CP(CAM_XCLKA),		(IEN  | PTD | DIS | M4)) /*GPIO_96 - LEFT*/\
+ MUX_VAL(CP(CAM_PCLK),		(IEN  | PTD | DIS | M4)) /*GPIO_97 - L2*/\
+ MUX_VAL(CP(CAM_FLD),		(IEN  | PTD | DIS | M4)) /*GPIO_98 - RIGHT*/\
+ MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M4)) /*GPIO_99 - MENU*/\
+ MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M4)) /*GPIO_100 - START*/\
+ MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M4)) /*GPIO_101 - Y*/\
+ MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M4)) /*GPIO_102 - L1*/\
+ MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M4)) /*GPIO_103 - DOWN*/\
+ MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M4)) /*GPIO_104 - SELECT*/\
+ MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M4)) /*GPIO_105 - R1*/\
+ MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M4)) /*GPIO_106 - B*/\
+ MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M4)) /*GPIO_107 - R2*/\
+ MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M4)) /*GPIO_109 - X*/\
+ MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M4)) /*GPIO_110 - UP*/\
+ MUX_VAL(CP(CAM_XCLKB),		(IEN  | PTD | DIS | M4)) /*GPIO_111 - A*/\
  /*Audio Interface To External DAC (Headphone, Speakers)*/\
  MUX_VAL(CP(MCBSP2_FSX),	(IDIS | PTD | DIS | M0)) /*McBSP2_FSX*/\
  MUX_VAL(CP(MCBSP2_CLKX),	(IDIS | PTD | DIS | M0)) /*McBSP2_CLKX*/\
  MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
- MUX_VAL(CP(MCBSP_CLKS),	(IEN  | PTU | DIS | M0)) /*McBSP_CLKS*/\
+ MUX_VAL(CP(MCBSP_CLKS),	(IEN  | PTD | DIS | M0)) /*McBSP_CLKS*/\
  MUX_VAL(CP(MCBSP2_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_118*/\
 							 /* - nPOWERDOWN_DAC*/\
  /*Expansion card 1*/\
@@ -219,13 +210,13 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(MCBSP4_DX),		(IDIS | PTD | DIS | M0)) /*McBSP4_DX*/\
  MUX_VAL(CP(MCBSP4_FSX),	(IEN  | PTD | DIS | M0)) /*McBSP4_FSX*/\
  /*GPIO definitions for muxed pins on AV connector*/\
- MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M4)) /*GPIO_144,*/\
+ MUX_VAL(CP(UART2_CTS),		(IEN  | PTD | EN  | M4)) /*GPIO_144,*/\
 							 /*UART2_CTS*/\
- MUX_VAL(CP(UART2_RTS),		(IEN  | PTU | DIS | M4)) /*GPIO_145,*/\
+ MUX_VAL(CP(UART2_RTS),		(IEN  | PTD | EN  | M4)) /*GPIO_145,*/\
 							 /*UART2_RTS*/\
- MUX_VAL(CP(UART2_TX),		(IEN  | PTU | EN  | M4)) /*GPIO_146,*/\
+ MUX_VAL(CP(UART2_TX),		(IEN  | PTD | EN  | M4)) /*GPIO_146,*/\
 							 /*UART2_TX*/\
- MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M4)) /*GPIO_147,*/\
+ MUX_VAL(CP(UART2_RX),		(IEN  | PTD | EN  | M4)) /*GPIO_147,*/\
 							 /*UART2_RX*/\
  /*Serial Interface (Peripheral boot, Linux console, on AV connector)*/\
  MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) /*UART3_RX*/\
@@ -240,30 +231,26 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(MCBSP1_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_159*/\
 							 /* - LED_WIFI*/\
  /*Switches*/\
- MUX_VAL(CP(MCSPI1_CS2),	(IEN  | PTU | DIS | M4)) /*GPIO_176*/\
+ MUX_VAL(CP(MCSPI1_CS2),	(IEN  | PTD | DIS | M4)) /*GPIO_176*/\
 							 /* - nHOLD_SWITCH*/\
- MUX_VAL(CP(CAM_D9),		(IEN  | PTU | DIS | M4)) /*GPIO_108*/\
+ MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M4)) /*GPIO_108*/\
 							 /* - nLID_SWITCH*/\
  /*External IRQs*/\
- MUX_VAL(CP(CAM_HS),		(IEN  | PTU | DIS | M4)) /*GPIO_94*/\
+ MUX_VAL(CP(CAM_HS),		(IEN  | PTD | DIS | M4)) /*GPIO_94*/\
 							 /* - nTOUCH_IRQ*/\
  MUX_VAL(CP(ETK_D7_ES2),	(IEN  | PTD | DIS | M4)) /*GPIO_21*/\
 							 /* - WIFI_IRQ*/\
  MUX_VAL(CP(MCBSP1_FSX),	(IEN  | PTD | DIS | M4)) /*GPIO_161*/\
 							 /* - nIRQ_NUB1*/\
- MUX_VAL(CP(CAM_WEN),		(IEN  | PTU | DIS | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M4)) /*GPIO_162*/\
 							 /* - nIRQ_NUB2*/\
  /*Various other stuff*/\
- MUX_VAL(CP(CAM_VS),		(IEN  | PTU | DIS | M4)) /*GPIO_95*/\
-							 /* - nTOUCH_BUSY*/\
  MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | DIS | M4)) /*GPIO_163*/\
 							 /* - nOC_USB5*/\
- MUX_VAL(CP(MCBSP1_CLKX),	(IDIS | PTD | DIS | M4)) /*GPIO_162*/\
-							 /* - START_ADC*/\
  MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTD | DIS | M4)) /*GPIO_22*/\
 							 /* - MSECURE*/\
- MUX_VAL(CP(CAM_STROBE),	(IEN  | PTU | DIS | M4)) /*GPIO_126*/\
-							 /* - HP_DETECT*/\
+ MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M4)) /*GPIO_115*/\
+							 /* - POP_OVERHEAT*/\
  /*External Resets and Enables*/\
  MUX_VAL(CP(ETK_D0_ES2),	(IDIS | PTD | DIS | M4)) /*GPIO_14*/\
 							 /* - nHDPHN_SHUTDOWN*/\
@@ -275,16 +262,15 @@ const omap3_sysinfo sysinfo = {
 							 /* - nLCD_RESET*/\
  MUX_VAL(CP(MCBSP1_CLKR),	(IDIS | PTD | DIS | M4)) /*GPIO_156*/\
 							 /* - RESET_NUBS*/\
- MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTU | EN  | M4)) /*GPIO_164*/\
+ MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M4)) /*GPIO_164*/\
 							 /* - EN_USB_5V*/\
- /*Unused*/\
- MUX_VAL(CP(HDQ_SIO),		(IEN  | PTU | EN  | M0)) /*HDQ_SIO - NC*/\
- MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) /*CSI2_DX0 - NC*/\
- MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) /*CSI2_DY0 - NC*/\
- MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) /*CSI2_DX1 - NC*/\
- MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) /*CSI2_DY1 - NC*/\
- MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) /*I2C2_SCL - NC*/\
- MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) /*I2C2_SDA - NC*/\
+ /*Spare GPIOs*/\
+ MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTD | EN  | M4)) /*GPIO_58*/\
+ MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTD | EN  | M4)) /*GPIO_64*/\
+ MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTD | EN  | M4)) /*GPIO_65*/\
+ MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M4)) /*GPIO_95*/\
+ MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | EN  | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(HDQ_SIO),		(IEN  | PTD | EN  | M4)) /*GPIO_170*/\
  /*HS USB OTG Port (connects to HSUSB0)*/\
  MUX_VAL(CP(HSUSB0_CLK),	(IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
  MUX_VAL(CP(HSUSB0_STP),	(IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\
@@ -338,8 +324,6 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
  MUX_VAL(CP(SYS_BOOT6),		(IEN  | PTD | DIS | M4)) /*GPIO_8*/\
  MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
- MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M4)) /*SYS_CLKOUT1 - NC*/\
- MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTD | DIS | M4)) /*SYS_CLKOUT2 - NC*/\
  /*JTAG*/\
  MUX_VAL(CP(JTAG_nTRST),	(IEN  | PTD | DIS | M0)) /*JTAG_nTRST*/\
  MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) /*JTAG_TCK*/\
@@ -412,6 +396,6 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_mbusflag*/\
  MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_sbusflag*/\
  MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
- MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTD | DIS | M7)) /*sdrc_cke1*/
+ MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTU | EN  | M0)) /*sdrc_cke1*/
 
 #endif

board/renesas/MigoR/u-boot.lds

-/*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
-	/*
-	   Base address of internal SDRAM is 0x0C000000.
-	   Although size of SDRAM can be either 16 or 32 MBytes,
-	   we assume 16 MBytes (ie ignore upper half if the full
-	   32 MBytes is present).
-
-	   NOTE: This address must match with the definition of
-	   TEXT_BASE in config.mk (in this directory).
-
-	*/
-	. = 0x8C000000 + (64*1024*1024) - (256*1024);
-
-	PROVIDE (reloc_dst = .);
-
-	PROVIDE (_ftext = .);
-	PROVIDE (_fcode = .);
-	PROVIDE (_start = .);
-
-	.text :
-	{
-		cpu/sh4/start.o		(.text)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
-		. = ALIGN(8192);
-		*(.text)
-		. = ALIGN(4);
-	} =0xFF
-	PROVIDE (_ecode = .);
-	.rodata :
-	{
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-		. = ALIGN(4);
-	}
-	PROVIDE (_etext = .);
-
-
-	PROVIDE (_fdata = .);
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	}
-	PROVIDE (_edata = .);
-
-	PROVIDE (_fgot = .);
-	.got :
-	{
-		*(.got)
-		. = ALIGN(4);
-	}
-	PROVIDE (_egot = .);
-
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
-	}
-	PROVIDE (__u_boot_cmd_end = .);
-
-	PROVIDE (reloc_dst_end = .);
-	/* _reloc_dst_end = .; */
-
-	PROVIDE (bss_start = .);
-	PROVIDE (__bss_start = .);
-	.bss :
-	{
-		*(.bss)
-		. = ALIGN(4);
-	}
-	PROVIDE (bss_end = .);
-
-	PROVIDE (_end = .);
-}

board/renesas/ap325rxa/u-boot.lds

-/*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
-	/*
-	   Base address of internal SDRAM is 0x88000000.
-	   Although size of SDRAM can be either 16 or 32 MBytes,
-	   we assume 16 MBytes (ie ignore upper half if the full
-	   32 MBytes is present).
-
-	   NOTE: This address must match with the definition of
-	   TEXT_BASE in config.mk (in this directory).
-
-	*/
-	. = 0x88000000 + (128*1024*1024) - (256*1024);
-
-	PROVIDE (reloc_dst = .);
-
-	PROVIDE (_ftext = .);
-	PROVIDE (_fcode = .);
-	PROVIDE (_start = .);
-
-	.text :
-	{
-		cpu/sh4/start.o		(.text)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
-		. = ALIGN(8192);
-		*(.text)
-		. = ALIGN(4);
-	} =0xFF
-	PROVIDE (_ecode = .);
-	.rodata :
-	{
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-		. = ALIGN(4);
-	}
-	PROVIDE (_etext = .);
-
-
-	PROVIDE (_fdata = .);
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	}
-	PROVIDE (_edata = .);
-
-	PROVIDE (_fgot = .);
-	.got :
-	{
-		*(.got)
-		. = ALIGN(4);
-	}
-	PROVIDE (_egot = .);
-
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
-	}
-	PROVIDE (__u_boot_cmd_end = .);
-
-	PROVIDE (reloc_dst_end = .);
-	/* _reloc_dst_end = .; */
-
-	PROVIDE (bss_start = .);
-	PROVIDE (__bss_start = .);
-	.bss :
-	{
-		*(.bss)
-		. = ALIGN(4);
-	}
-	PROVIDE (bss_end = .);
-
-	PROVIDE (_end = .);
-}

board/renesas/r2dplus/u-boot.lds

-/*
- * Copyrigth (c) 2007,2008
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
-	/*
-	   Base address of internal SDRAM is 0x0C000000.
-	   Although size of SDRAM can be either 16 or 32 MBytes,
-	   we assume 16 MBytes (ie ignore upper half if the full
-	   32 MBytes is present).
-
-	   NOTE: This address must match with the definition of
-	   TEXT_BASE in config.mk (in this directory).
-
-	*/
-	. = 0x0C000000 + (64*1024*1024) - (256*1024);
-
-	PROVIDE (reloc_dst = .);
-
-	PROVIDE (_ftext = .);
-	PROVIDE (_fcode = .);
-	PROVIDE (_start = .);
-
-	.text :
-	{
-		cpu/sh4/start.o		(.text)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
-		. = ALIGN(8192);
-		*(.text)
-		. = ALIGN(4);
-	} =0xFF
-	PROVIDE (_ecode = .);
-	.rodata :
-	{
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-		. = ALIGN(4);
-	}
-	PROVIDE (_etext = .);
-
-
-	PROVIDE (_fdata = .);
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	}
-	PROVIDE (_edata = .);
-
-	PROVIDE (_fgot = .);
-	.got :
-	{
-		*(.got)
-		. = ALIGN(4);
-	}
-	PROVIDE (_egot = .);
-
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
-	}
-	PROVIDE (__u_boot_cmd_end = .);
-
-	PROVIDE (reloc_dst_end = .);
-	/* _reloc_dst_end = .; */
-
-	PROVIDE (bss_start = .);
-	PROVIDE (__bss_start = .);
-	.bss :
-	{
-		*(.bss)
-		. = ALIGN(4);
-	}
-	PROVIDE (bss_end = .);
-
-	PROVIDE (_end = .);
-}

board/renesas/r7780mp/u-boot.lds

-/*
- * Copyrigth (c) 2007,2008
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
-	/*
-	   Base address of internal SDRAM is 0x0C000000.
-	   Although size of SDRAM can be either 16 or 32 MBytes,
-	   we assume 16 MBytes (ie ignore upper half if the full
-	   32 MBytes is present).
-
-	   NOTE: This address must match with the definition of
-	   TEXT_BASE in config.mk (in this directory).
-
-	*/
-	. = 0x08000000 + (128*1024*1024) - (256*1024);
-
-	PROVIDE (reloc_dst = .);
-
-	PROVIDE (_ftext = .);
-	PROVIDE (_fcode = .);
-	PROVIDE (_start = .);
-
-	.text :
-	{
-		cpu/sh4/start.o		(.text)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
-		. = ALIGN(8192);
-		*(.text)
-		. = ALIGN(4);
-	} =0xFF
-	PROVIDE (_ecode = .);
-	.rodata :
-	{
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-		. = ALIGN(4);
-	}
-	PROVIDE (_etext = .);
-
-
-	PROVIDE (_fdata = .);
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	}
-	PROVIDE (_edata = .);
-
-	PROVIDE (_fgot = .);
-	.got :
-	{
-		*(.got)
-		. = ALIGN(4);
-	}
-	PROVIDE (_egot = .);
-
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
-	}
-	PROVIDE (__u_boot_cmd_end = .);
-
-	PROVIDE (reloc_dst_end = .);
-	/* _reloc_dst_end = .; */
-
-	PROVIDE (bss_start = .);
-	PROVIDE (__bss_start = .);
-	.bss :
-	{
-		*(.bss)
-		. = ALIGN(4);
-	}
-	PROVIDE (bss_end = .);
-
-	PROVIDE (_end = .);
-}

board/renesas/sh7763rdp/u-boot.lds

-/*
- * Copyrigth (c) 2007,2008
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
-	/*
-	   Base address of internal SDRAM is 0x0C000000.
-	   Although size of SDRAM can be either 16 or 32 MBytes,
-	   we assume 16 MBytes (ie ignore upper half if the full
-	   32 MBytes is present).
-
-	   NOTE: This address must match with the definition of
-	   TEXT_BASE in config.mk (in this directory).
-
-	*/
-	. = 0x8C000000 + (64*1024*1024) - (256*1024);
-
-	PROVIDE (reloc_dst = .);
-
-	PROVIDE (_ftext = .);
-	PROVIDE (_fcode = .);
-	PROVIDE (_start = .);
-
-	.text :
-	{
-		cpu/sh4/start.o		(.text)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
-		. = ALIGN(8192);
-		*(.text)
-		. = ALIGN(4);
-	} =0xFF
-	PROVIDE (_ecode = .);
-	.rodata :
-	{
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-		. = ALIGN(4);
-	}
-	PROVIDE (_etext = .);
-
-
-	PROVIDE (_fdata = .);
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	}
-	PROVIDE (_edata = .);
-
-	PROVIDE (_fgot = .);
-	.got :
-	{
-		*(.got)
-		. = ALIGN(4);
-	}
-	PROVIDE (_egot = .);
-
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
-	}
-	PROVIDE (__u_boot_cmd_end = .);
-
-	PROVIDE (reloc_dst_end = .);
-	/* _reloc_dst_end = .; */
-
-	PROVIDE (bss_start = .);
-	PROVIDE (__bss_start = .);
-	.bss :
-	{
-		*(.bss)
-		. = ALIGN(4);
-	}
-	PROVIDE (bss_end = .);
-
-	PROVIDE (_end = .);
-}

board/renesas/sh7785lcr/Makefile

@@ -18,7 +18,7 @@
 
 include $(TOPDIR)/config.mk
 
-LIB	= lib$(BOARD).a
+LIB	= $(obj)lib$(BOARD).a
 
 COBJS	:= sh7785lcr.o selfcheck.o rtl8169_mac.o
 SOBJS	:= lowlevel_init.o

board/renesas/sh7785lcr/lowlevel_init.S

@@ -233,35 +233,6 @@ DBSC2_DBRFCNT0_D:	.long	0x00010000
 WAIT_200US:	.long	33333
 
 /*------- GPIO -------*/
-#define GPIO_BASE	0xffe70000
-PACR_A:		.long	GPIO_BASE + 0x00
-PBCR_A:		.long	GPIO_BASE + 0x02
-PCCR_A:		.long	GPIO_BASE + 0x04
-PDCR_A:		.long	GPIO_BASE + 0x06
-PECR_A:		.long	GPIO_BASE + 0x08
-PFCR_A:		.long	GPIO_BASE + 0x0a
-PGCR_A:		.long	GPIO_BASE + 0x0c
-PHCR_A:		.long	GPIO_BASE + 0x0e
-PJCR_A:		.long	GPIO_BASE + 0x10
-PKCR_A:		.long	GPIO_BASE + 0x12
-PLCR_A:		.long	GPIO_BASE + 0x14
-PMCR_A:		.long	GPIO_BASE + 0x16
-PNCR_A:		.long	GPIO_BASE + 0x18
-PPCR_A:		.long	GPIO_BASE + 0x1a
-PQCR_A:		.long	GPIO_BASE + 0x1c
-PRCR_A:		.long	GPIO_BASE + 0x1e
-PEPUPR_A:	.long	GPIO_BASE + 0x48
-PHPUPR_A:	.long	GPIO_BASE + 0x4e
-PJPUPR_A:	.long	GPIO_BASE + 0x50
-PKPUPR_A:	.long	GPIO_BASE + 0x52
-PLPUPR_A:	.long	GPIO_BASE + 0x54
-PMPUPR_A:	.long	GPIO_BASE + 0x56
-PNPUPR_A:	.long	GPIO_BASE + 0x58
-PPUPR1_A:	.long	GPIO_BASE + 0x60
-PPUPR2_A:	.long	GPIO_BASE + 0x62
-P1MSELR_A:	.long	GPIO_BASE + 0x80
-P2MSELR_A:	.long	GPIO_BASE + 0x82
-
 PACR_D:		.long	0x0000
 PBCR_D:		.long	0x0000
 PCCR_D:		.long	0x0000
@@ -291,6 +262,35 @@ PPUPR2_D:	.long	0xff00
 P1MSELR_D:	.long	0x3780
 P2MSELR_D:	.long	0x0000
 
+#define GPIO_BASE	0xffe70000
+PACR_A:		.long	GPIO_BASE + 0x00
+PBCR_A:		.long	GPIO_BASE + 0x02
+PCCR_A:		.long	GPIO_BASE + 0x04
+PDCR_A:		.long	GPIO_BASE + 0x06
+PECR_A:		.long	GPIO_BASE + 0x08
+PFCR_A:		.long	GPIO_BASE + 0x0a
+PGCR_A:		.long	GPIO_BASE + 0x0c
+PHCR_A:		.long	GPIO_BASE + 0x0e
+PJCR_A:		.long	GPIO_BASE + 0x10
+PKCR_A:		.long	GPIO_BASE + 0x12
+PLCR_A:		.long	GPIO_BASE + 0x14
+PMCR_A:		.long	GPIO_BASE + 0x16
+PNCR_A:		.long	GPIO_BASE + 0x18
+PPCR_A:		.long	GPIO_BASE + 0x1a
+PQCR_A:		.long	GPIO_BASE + 0x1c
+PRCR_A:		.long	GPIO_BASE + 0x1e
+PEPUPR_A:	.long	GPIO_BASE + 0x48
+PHPUPR_A:	.long	GPIO_BASE + 0x4e
+PJPUPR_A:	.long	GPIO_BASE + 0x50
+PKPUPR_A:	.long	GPIO_BASE + 0x52
+PLPUPR_A:	.long	GPIO_BASE + 0x54
+PMPUPR_A:	.long	GPIO_BASE + 0x56
+PNPUPR_A:	.long	GPIO_BASE + 0x58
+PPUPR1_A:	.long	GPIO_BASE + 0x60
+PPUPR2_A:	.long	GPIO_BASE + 0x62
+P1MSELR_A:	.long	GPIO_BASE + 0x80
+P2MSELR_A:	.long	GPIO_BASE + 0x82
+
 /*------- LBSC -------*/
 PASCR_A:		.long	0xff000070
 PASCR_32BIT_MODE:	.long	0x80000000	/* check booting mode */

common/cmd_ubi.c

@@ -395,11 +395,13 @@ static int ubi_volume_read(char *volume, char *buf, size_t size)
 	return err ? err : count_save - size;
 }
 
-static int ubi_dev_scan(struct mtd_info *info, char *ubidev)
+static int ubi_dev_scan(struct mtd_info *info, char *ubidev,
+		const char *vid_header_offset)
 {
 	struct mtd_device *dev;
 	struct part_info *part;
 	struct mtd_partition mtd_part;
+	char ubi_mtd_param_buffer[80];
 	u8 pnum;
 	int err;
 
@@ -413,7 +415,11 @@ static int ubi_dev_scan(struct mtd_info *info, char *ubidev)
 	mtd_part.offset = part->offset;
 	add_mtd_partitions(info, &mtd_part, 1);
 
-	err = ubi_mtd_param_parse(buffer, NULL);
+	strcpy(ubi_mtd_param_buffer, buffer);
+	if (vid_header_offset)
+		sprintf(ubi_mtd_param_buffer, "mtd=%d,%s", pnum,
+				vid_header_offset);
+	err = ubi_mtd_param_parse(ubi_mtd_param_buffer, NULL);
 	if (err) {
 		del_mtd_partitions(info);
 		return err;
@@ -450,6 +456,7 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		char mtd_dev[16];
 		struct mtd_device *dev;
 		struct part_info *part;
+		const char *vid_header_offset = NULL;
 		u8 pnum;
 
 		/* Print current partition */
@@ -497,8 +504,11 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 		ubi_dev.selected = 1;
 
+		if (argc > 3)
+			vid_header_offset = argv[3];
 		strcpy(ubi_dev.part_name, argv[2]);
-		err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name);
+		err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name,
+				vid_header_offset);
 		if (err) {
 			printf("UBI init error %d\n", err);
 			ubi_dev.selected = 0;
@@ -594,8 +604,9 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(ubi, 6, 1, do_ubi,
 	"ubi commands",
-	"part [part]"
-		" - Show or set current partition\n"
+	"part [part] [offset]\n"
+		" - Show or set current partition (with optional VID"
+		" header offset)\n"
 	"ubi info [l[ayout]]"
 		" - Display volume and ubi layout information\n"
 	"ubi create[vol] volume [size] [type]"

common/cmd_ubifs.c

@@ -47,6 +47,10 @@ int do_ubifs_mount(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	char *vol_name;
 	int ret;
 
+	if (argc != 2) {
+		cmd_usage(cmdtp);
+		return 1;
+	}
 	vol_name = argv[1];
 	debug("Using volume %s\n", vol_name);
 
@@ -88,6 +92,7 @@ int do_ubifs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	char *filename;
+	char *endp;
 	int ret;
 	u32 addr;
 	u32 size = 0;
@@ -98,15 +103,25 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	if (argc < 3) {
-		printf("Usage:\n%s\n", cmdtp->usage);
+		cmd_usage(cmdtp);
 		return -1;
 	}
 
-	addr = simple_strtoul(argv[1], NULL, 16);
+	addr = simple_strtoul(argv[1], &endp, 16);
+	if (endp == argv[1]) {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+
 	filename = argv[2];
 
-	if (argc == 4)
-		size = simple_strtoul(argv[3], NULL, 16);
+	if (argc == 4) {
+		size = simple_strtoul(argv[3], &endp, 16);
+		if (endp == argv[3]) {
+			cmd_usage(cmdtp);
+			return 1;
+		}
+	}
 	debug("Loading file '%s' to address 0x%08x (size %d)\n", filename, addr, size);
 
 	ret = ubifs_load(filename, addr, size);
@@ -119,7 +134,8 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
 	ubifsmount, 2, 0, do_ubifs_mount,
 	"mount UBIFS volume",
-	""
+	"<volume-name>\n"
+	"    - mount 'volume-name' volume"
 );
 
 U_BOOT_CMD(ubifsls, 2, 0, do_ubifs_ls,

cpu/arm926ejs/at91/Makefile

@@ -29,8 +29,11 @@ COBJS-$(CONFIG_AT91CAP9)	+= at91cap9_devices.o
 COBJS-$(CONFIG_AT91SAM9260)	+= at91sam9260_devices.o
 COBJS-$(CONFIG_AT91SAM9G20)	+= at91sam9260_devices.o
 COBJS-$(CONFIG_AT91SAM9261)	+= at91sam9261_devices.o
+COBJS-$(CONFIG_AT91SAM9G10)	+= at91sam9261_devices.o
 COBJS-$(CONFIG_AT91SAM9263)	+= at91sam9263_devices.o
 COBJS-$(CONFIG_AT91SAM9RL)	+= at91sam9rl_devices.o
+COBJS-$(CONFIG_AT91SAM9M10G45)	+= at91sam9m10g45_devices.o
+COBJS-$(CONFIG_AT91SAM9G45)	+= at91sam9m10g45_devices.o
 COBJS-$(CONFIG_AT91_LED)	+= led.o
 COBJS-y += clock.o
 COBJS-y += cpu.o

cpu/arm926ejs/at91/at91sam9m10g45_devices.c

+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_serial0_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB19, 1);	/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);	/* RXD0 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD1 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PD6, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PD7, 0);		/* RXD2 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US2);
+}
+
+void at91_serial3_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB12, 0);	/* DRXD */
+	at91_set_A_periph(AT91_PIN_PB13, 1);	/* DTXD */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);;
+}
+
+void at91_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+	at91_serial0_hw_init();
+#endif
+
+#ifdef CONFIG_USART1
+	at91_serial1_hw_init();
+#endif
+
+#ifdef CONFIG_USART2
+	at91_serial2_hw_init();
+#endif
+
+#ifdef CONFIG_USART3	/* DBGU */
+	at91_serial3_hw_init();
+#endif
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI0_MISO */
+	at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
+	at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_SPI0);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_A_periph(AT91_PIN_PB3, 0);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_B_periph(AT91_PIN_PB18, 0);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_B_periph(AT91_PIN_PB19, 0);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_B_periph(AT91_PIN_PD27, 0);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_gpio_output(AT91_PIN_PB3, 0);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_gpio_output(AT91_PIN_PB18, 0);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_gpio_output(AT91_PIN_PB19, 0);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_gpio_output(AT91_PIN_PD27, 0);
+	}
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+	at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_MISO */
+	at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
+	at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_SPI1);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_A_periph(AT91_PIN_PB17, 0);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_B_periph(AT91_PIN_PD28, 0);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_A_periph(AT91_PIN_PD18, 0);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_A_periph(AT91_PIN_PD19, 0);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_gpio_output(AT91_PIN_PB17, 0);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_gpio_output(AT91_PIN_PD28, 0);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_gpio_output(AT91_PIN_PD18, 0);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_gpio_output(AT91_PIN_PD19, 0);
+	}
+
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* EMDC */
+#ifndef CONFIG_RMII
+	at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECRS */
+	at91_set_B_periph(AT91_PIN_PA30, 0);	/* ECOL */
+	at91_set_B_periph(AT91_PIN_PA8,  0);	/* ERX2 */
+	at91_set_B_periph(AT91_PIN_PA9,  0);	/* ERX3 */
+	at91_set_B_periph(AT91_PIN_PA28, 0);	/* ERXCK */
+	at91_set_B_periph(AT91_PIN_PA6,  0);	/* ETX2 */
+	at91_set_B_periph(AT91_PIN_PA7,  0);	/* ETX3 */
+	at91_set_B_periph(AT91_PIN_PA27, 0);	/* ETXER */
+#endif
+}
+#endif

cpu/arm926ejs/at91/clock.c

@@ -183,15 +183,23 @@ int at91_clock_init(unsigned long main_clock)
 	 * For now, assume this parentage won't change.
 	 */
 	mckr = at91_sys_read(AT91_PMC_MCKR);
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+	/* plla divisor by 2 */
+	plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
+#endif
 	freq = mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_CSS);
+
 	freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));			/* prescale */
 #if defined(CONFIG_AT91RM9200)
 	mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 #elif defined(CONFIG_AT91SAM9G20)
 	mck_rate_hz = (mckr & AT91_PMC_MDIV) ?
-		freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
+		freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;		/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 	if (mckr & AT91_PMC_PDIV)
-		freq /= 2;		/* processor clock division */
+		freq /= 2;						/* processor clock division */
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+	mck_rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
+		freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 #else
 	mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 #endif

cpu/mpc83xx/cpu_init.c

@@ -303,11 +303,11 @@ void cpu_init_f (volatile immap_t * im)
 	struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
 
 	/* Configure interface. */
-	setbits_be32((void *)ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
+	setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
 
 	/* Wait for clock to stabilize */
 	do {
-		temp = in_be32((void *)ehci->control);
+		temp = in_be32(&ehci->control);
 		udelay(1000);
 	} while (!(temp & PHY_CLK_VALID));
 #endif

cpu/ppc4xx/4xx_pci.c

@@ -87,6 +87,20 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 int __pci_pre_init(struct pci_controller *hose)
 {
+#if defined (CONFIG_405EP)
+	/*
+	 * Enable the internal PCI arbiter by default.
+	 *
+	 * On 405EP CPUs the internal arbiter can be controlled
+	 * by the I2C strapping EEPROM. If you want to do so
+	 * or if you want to disable the arbiter pci_pre_init()
+	 * must be reimplemented without enabling the arbiter.
+	 * The arbiter is enabled in this place because of
+	 * compatibility reasons.
+	 */
+	mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_ARBIT_EN);
+#endif /* CONFIG_405EP */
+
 	return 1;
 }
 int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init")));
@@ -323,8 +337,15 @@ void pci_405gp_init(struct pci_controller *hose)
 	}
 #endif
 
-#if defined(CONFIG_405EP) /* on ppc405ep vendor id is not set */
-	pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, 0x1014); /* IBM */
+#if defined(CONFIG_405EP)
+	/*
+	 * on ppc405ep vendor/device id is not set
+	 * The user manual says 0x1014 (IBM) / 0x0156 (405GP!)
+	 * are the correct values.
+	 */
+	pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM);
+	pci_write_config_word(PCIDEVID_405GP,
+			      PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP);
 #endif
 
 	/*

cpu/ppc4xx/cpu_init.c

@@ -174,11 +174,6 @@ cpu_init_f (void)
 	 * Set EMAC noise filter bits
 	 */
 	mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
-
-	/*
-	 * Enable the internal PCI arbiter
-	 */
-	mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
 #endif /* CONFIG_405EP */
 
 #if defined(CONFIG_SYS_4xx_GPIO_TABLE)

board/renesas/rsk7203/u-boot.lds → cpu/sh2/u-boot.lds

@@ -28,15 +28,9 @@ ENTRY(_start)
 SECTIONS
 {
 	/*
-	 * Base address of internal SDRAM is 0x0C000000.
-	 *
-	 * NOTE: This address must match with the definition of
-	 *TEXT_BASE in config.mk (in this directory).
+	 * entry and reloct_dst will be provided via ldflags
 	 */
-
-	. = 0x0C000000 + (8*1024*1024) - (256*1024);
-
-	PROVIDE (reloc_dst = .);
+	. = .;
 
 	PROVIDE (_ftext = .);
 	PROVIDE (_fcode = .);

board/mpr2/u-boot.lds → cpu/sh3/u-boot.lds

@@ -34,16 +34,9 @@ ENTRY(_start)
 SECTIONS
 {
 	/*
-	   Base address of internal SDRAM is 0x8C000000.
-	   U-Boot resides in the last 256 kB of the 64 MB.
-
-	   NOTE: This address must match with the definition of
-	   TEXT_BASE in config.mk (in this directory).
-
-	*/
-	. = 0x8C000000 + (64*1024*1024) - (256*1024);
-
-	PROVIDE (reloc_dst = .);
+	 * entry and reloct_dst will be provided via ldflags
+	 */
+	. = .;
 
 	PROVIDE (_ftext = .);
 	PROVIDE (_fcode = .);

board/renesas/sh7785lcr/u-boot.lds → cpu/sh4/u-boot.lds

 /*
- * Copyrigth (c) 2007
+ * Copyright (C) 2007
  * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- * Copyrigth (c) 2008-2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * Copyright (C) 2008-2009
+ * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -28,9 +30,10 @@ ENTRY(_start)
 
 SECTIONS
 {
-	. = 0x88000000 + (128 * 1024 * 1024) - (512 * 1024);
-
-	PROVIDE (reloc_dst = .);
+	/*
+	 * entry and reloct_dst will be provided via ldflags
+	 */
+	. = .;
 
 	PROVIDE (_ftext = .);
 	PROVIDE (_fcode = .);
@@ -85,7 +88,7 @@ SECTIONS
 
 	PROVIDE (bss_start = .);
 	PROVIDE (__bss_start = .);
-	.bss :
+	.bss (NOLOAD) :
 	{
 		*(.bss)
 		. = ALIGN(4);

doc/README.at91

@@ -27,7 +27,7 @@ Environment variables
 
 
 ------------------------------------------------------------------------------
-AT91SAM9261EK
+AT91SAM9261EK, AT91SAM9G10EK
 ------------------------------------------------------------------------------
 
 Memory map
@@ -74,6 +74,26 @@ Environment variables
 		make at91sam9263ek_norflash_boot_config	- boot from nor falsh
 
 
+------------------------------------------------------------------------------
+AT91SAM9M10G45EK
+------------------------------------------------------------------------------
+
+Memory map
+	0x20000000 - 23FFFFFF	SDRAM (64 MB)
+	0xC0000000 - Cxxxxxxx	Atmel Dataflash card (J12)
+
+Environment variables
+
+	U-Boot environment variables can be stored at different places:
+		- Dataflash on SPI chip select 0 (dataflash card)
+		- Nand flash.
+
+	You can choose your storage location at config step (here for at91sam9m10g45ek) :
+		make at91sam9m10g45ek_config			- use data flash (spi cs0) (default)
+		make at91sam9m10g45ek_nandflash_config		- use nand flash
+		make at91sam9m10g45ek_dataflash_cs0_config	- use data flash (spi cs0)
+
+
 ------------------------------------------------------------------------------
 AT91SAM9RLEK
 ------------------------------------------------------------------------------

drivers/mtd/cfi_flash.c

@@ -835,14 +835,19 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
 		break;
 	case CFI_CMDSET_AMD_EXTENDED:
 	case CFI_CMDSET_AMD_STANDARD:
-#ifdef CONFIG_FLASH_CFI_LEGACY
-	case CFI_CMDSET_AMD_LEGACY:
-#endif
 		sect = find_sector(info, dest);
 		flash_unlock_seq (info, sect);
 		flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_WRITE);
 		sect_found = 1;
 		break;
+#ifdef CONFIG_FLASH_CFI_LEGACY
+	case CFI_CMDSET_AMD_LEGACY:
+		sect = find_sector(info, dest);
+		flash_unlock_seq (info, 0);
+		flash_write_cmd (info, 0, info->addr_unlock1, AMD_CMD_WRITE);
+		sect_found = 1;
+		break;
+#endif
 	}
 
 	switch (info->portwidth) {

drivers/mtd/nand/Makefile

@@ -40,6 +40,7 @@ COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o
 COBJS-$(CONFIG_NAND_DAVINCI) += davinci_nand.o
 COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
 COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
+COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
 COBJS-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
 COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o
 COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o

drivers/mtd/nand/kirkwood_nand.c

+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/kirkwood.h>
+#include <nand.h>
+
+/* NAND Flash Soc registers */
+struct kwnandf_registers {
+	u32 rd_params;	/* 0x10418 */
+	u32 wr_param;	/* 0x1041c */
+	u8  pad[0x10470 - 0x1041c - 4];
+	u32 ctrl;	/* 0x10470 */
+};
+
+static struct kwnandf_registers *nf_reg =
+	(struct kwnandf_registers *)KW_NANDF_BASE;
+
+/*
+ * hardware specific access to control-lines/bits
+ */
+#define NAND_ACTCEBOOT_BIT		0x02
+
+static void kw_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+			      unsigned int ctrl)
+{
+	struct nand_chip *nc = mtd->priv;
+	u32 offs;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		offs = (1 << 0);	/* Commands with A[1:0] == 01 */
+	else if (ctrl & NAND_ALE)
+		offs = (1 << 1);	/* Addresses with A[1:0] == 10 */
+	else
+		return;
+
+	writeb(cmd, nc->IO_ADDR_W + offs);
+}
+
+void kw_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	u32 data;
+
+	data = readl(&nf_reg->ctrl);
+	data |= NAND_ACTCEBOOT_BIT;
+	writel(data, &nf_reg->ctrl);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING;
+	nand->ecc.mode = NAND_ECC_SOFT;
+	nand->cmd_ctrl = kw_nand_hwcontrol;
+	nand->chip_delay = 30;
+	nand->select_chip = kw_nand_select_chip;
+	return 0;
+}

drivers/net/macb.c

@@ -447,14 +447,16 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
 	/* choose RMII or MII mode. This depends on the board */
 #ifdef CONFIG_RMII
 #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20)
+    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
+	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
 	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, 0);
 #endif
 #else
 #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20)
+    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
+	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
 	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, MACB_BIT(MII));

drivers/usb/host/Makefile

@@ -37,6 +37,7 @@ COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o
 COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o
 COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
 COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
+COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
 COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
 COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 

drivers/usb/host/ehci-fsl.c

@@ -41,15 +41,15 @@ int ehci_hcd_init(void)
 	struct usb_ehci *ehci;
 
 	ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
-	hccr = (struct ehci_hccr *)((uint32_t)ehci->caplength);
+	hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
 	hcor = (struct ehci_hcor *)((uint32_t) hccr +
 			HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
 
 	/* Set to Host mode */
-	setbits_le32((void *)ehci->usbmode, CM_HOST);
+	setbits_le32(&ehci->usbmode, CM_HOST);
 
-	out_be32((void *)ehci->snoop1, SNOOP_SIZE_2GB);
-	out_be32((void *)ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
+	out_be32(&ehci->snoop1, SNOOP_SIZE_2GB);
+	out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
 
 	/* Init phy */
 	if (!strcmp(getenv("usb_phy_type"), "utmi"))
@@ -58,13 +58,13 @@ int ehci_hcd_init(void)
 		out_le32(&(hcor->or_portsc[0]), PORT_PTS_ULPI);
 
 	/* Enable interface. */
-	setbits_be32((void *)ehci->control, USB_EN);
+	setbits_be32(&ehci->control, USB_EN);
 
-	out_be32((void *)ehci->prictrl, 0x0000000c);
-	out_be32((void *)ehci->age_cnt_limit, 0x00000040);
-	out_be32((void *)ehci->sictrl, 0x00000001);
+	out_be32(&ehci->prictrl, 0x0000000c);
+	out_be32(&ehci->age_cnt_limit, 0x00000040);
+	out_be32(&ehci->sictrl, 0x00000001);
 
-	in_le32((void *)ehci->usbmode);
+	in_le32(&ehci->usbmode);
 
 	return 0;
 }

drivers/usb/host/ehci-hcd.c

@@ -716,7 +716,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 			goto unknown;
 		}
 		/* unblock posted writes */
-		ehci_readl(&hcor->or_usbcmd);
+		(void) ehci_readl(&hcor->or_usbcmd);
 		break;
 	case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
 		reg = ehci_readl(status_reg);
@@ -745,7 +745,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 		}
 		ehci_writel(status_reg, reg);
 		/* unblock posted write */
-		ehci_readl(&hcor->or_usbcmd);
+		(void) ehci_readl(&hcor->or_usbcmd);
 		break;
 	default:
 		debug("Unknown request\n");

drivers/usb/host/ehci-kirkwood.c

+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb.h>
+#include "ehci.h"
+#include "ehci-core.h"
+#include <asm/arch/kirkwood.h>
+
+#define rdl(off)	readl(KW_USB20_BASE + (off))
+#define wrl(off, val)	writel((val), KW_USB20_BASE + (off))
+
+#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
+#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
+#define USB_TARGET_DRAM		0x0
+
+/*
+ * USB 2.0 Bridge Address Decoding registers setup
+ */
+static void usb_brg_adrdec_setup(void)
+{
+	int i;
+	u32 size, attrib;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+
+		/* Enable DRAM bank */
+		switch (i) {
+		case 0:
+			attrib = KWCPU_ATTR_DRAM_CS0;
+			break;
+		case 1:
+			attrib = KWCPU_ATTR_DRAM_CS1;
+			break;
+		case 2:
+			attrib = KWCPU_ATTR_DRAM_CS2;
+			break;
+		case 3:
+			attrib = KWCPU_ATTR_DRAM_CS3;
+			break;
+		default:
+			/* invalide bank, disable access */
+			attrib = 0;
+			break;
+		}
+
+		size = kw_sdram_bs(i);
+		if ((size) && (attrib))
+			wrl(USB_WINDOW_CTRL(i),
+				KWCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM,
+					attrib, KWCPU_WIN_ENABLE));
+		else
+			wrl(USB_WINDOW_CTRL(i), KWCPU_WIN_DISABLE);
+
+		wrl(USB_WINDOW_BASE(i), kw_sdram_bar(i));
+	}
+}
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(void)
+{
+	usb_brg_adrdec_setup();
+
+	hccr = (struct ehci_hccr *)(KW_USB20_BASE + 0x100);
+	hcor = (struct ehci_hcor *)((uint32_t) hccr
+			+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	debug("Kirkwood-ehci: init hccr %x and hcor %x hc_length %d\n",
+		(uint32_t)hccr, (uint32_t)hcor,
+		(uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(void)
+{
+	return 0;
+}
+

drivers/usb/musb/musb_core.h

@@ -307,10 +307,4 @@ extern void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt);
 extern void write_fifo(u8 ep, u32 length, void *fifo_data);
 extern void read_fifo(u8 ep, u32 length, void *fifo_data);
 
-/* extern functions */
-extern inline void musb_writew(u32 offset, u16 value);
-extern inline void musb_writeb(u32 offset, u8 value);
-extern inline u16 musb_readw(u32 offset);
-extern inline u8 musb_readb(u32 offset);
-
 #endif	/* __MUSB_HDRC_DEFS_H__ */

drivers/usb/musb/musb_hcd.c

@@ -111,6 +111,7 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
 {
 	u16 csr;
 	int result = 1;
+	int timeout = CONFIG_MUSB_TIMEOUT;
 
 	while (result > 0) {
 		csr = readw(&musbr->txcsr);
@@ -152,7 +153,17 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
 			}
 			break;
 		}
+
+		/* Check the timeout */
+		if (--timeout)
+			udelay(1);
+		else {
+			dev->status = USB_ST_CRC_ERR;
+			result = -1;
+			break;
+		}
 	}
+
 	return result;
 }
 
@@ -162,6 +173,7 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
 static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
 {
 	u16 csr;
+	int timeout = CONFIG_MUSB_TIMEOUT;
 
 	do {
 		if (check_stall(ep, 1)) {
@@ -174,6 +186,15 @@ static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
 			dev->status = USB_ST_CRC_ERR;
 			return 0;
 		}
+
+		/* Check the timeout */
+		if (--timeout)
+			udelay(1);
+		else {
+			dev->status = USB_ST_CRC_ERR;
+			return -1;
+		}
+
 	} while (csr & MUSB_TXCSR_TXPKTRDY);
 	return 1;
 }
@@ -184,6 +205,7 @@ static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
 static u8 wait_until_rxep_ready(struct usb_device *dev, u8 ep)
 {
 	u16 csr;
+	int timeout = CONFIG_MUSB_TIMEOUT;
 
 	do {
 		if (check_stall(ep, 0)) {
@@ -196,6 +218,15 @@ static u8 wait_until_rxep_ready(struct usb_device *dev, u8 ep)
 			dev->status = USB_ST_CRC_ERR;
 			return 0;
 		}
+
+		/* Check the timeout */
+		if (--timeout)
+			udelay(1);
+		else {
+			dev->status = USB_ST_CRC_ERR;
+			return -1;
+		}
+
 	} while (!(csr & MUSB_RXCSR_RXPKTRDY));
 	return 1;
 }

drivers/usb/musb/musb_hcd.h

@@ -30,6 +30,10 @@
 extern unsigned char new[];
 #endif
 
+#ifndef CONFIG_MUSB_TIMEOUT
+# define CONFIG_MUSB_TIMEOUT 100000
+#endif
+
 /* This defines the endpoint number used for control transfers */
 #define MUSB_CONTROL_EP 0
 

include/asm-arm/arch-at91/at91_pmc.h

@@ -89,6 +89,7 @@
 #define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
 #define			AT91SAM9_PMC_MDIV_2		(1 << 8)
 #define			AT91SAM9_PMC_MDIV_4		(2 << 8)
+#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
 #define			AT91SAM9_PMC_MDIV_6		(3 << 8)
 #define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
 #define			AT91_PMC_PDIV_1			(0 << 12)

include/asm-arm/arch-at91/at91sam9_matrix.h

@@ -21,6 +21,8 @@
 #include <asm/arch/at91sam9rl_matrix.h>
 #elif defined(CONFIG_AT91CAP9)
 #include <asm/arch/at91cap9_matrix.h>
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#include <asm/arch/at91sam9g45_matrix.h>
 #else
 #error "Unsupported AT91SAM9/CAP9 processor"
 #endif

include/asm-arm/arch-at91/at91sam9g45.h

+/*
+ * Chip-specific header file for the AT91SAM9M1x family
+ *
+ *  Copyright (C) 2008 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_H
+#define AT91SAM9G45_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Controller Interrupt */
+#define AT91SAM9G45_ID_PIOA	2	/* Parallel I/O Controller A */
+#define AT91SAM9G45_ID_PIOB	3	/* Parallel I/O Controller B */
+#define AT91SAM9G45_ID_PIOC	4	/* Parallel I/O Controller C */
+#define AT91SAM9G45_ID_PIODE	5	/* Parallel I/O Controller D and E */
+#define AT91SAM9G45_ID_TRNG	6	/* True Random Number Generator */
+#define AT91SAM9G45_ID_US0	7	/* USART 0 */
+#define AT91SAM9G45_ID_US1	8	/* USART 1 */
+#define AT91SAM9G45_ID_US2	9	/* USART 2 */
+#define AT91SAM9G45_ID_US3	10	/* USART 3 */
+#define AT91SAM9G45_ID_MCI0	11	/* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9G45_ID_TWI0	12	/* Two-Wire Interface 0 */
+#define AT91SAM9G45_ID_TWI1	13	/* Two-Wire Interface 1 */
+#define AT91SAM9G45_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9G45_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9G45_ID_SSC0	16	/* Synchronous Serial Controller 0 */
+#define AT91SAM9G45_ID_SSC1	17	/* Synchronous Serial Controller 1 */
+#define AT91SAM9G45_ID_TCB	18	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9G45_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define AT91SAM9G45_ID_TSC	20	/* Touch Screen ADC Controller */
+#define AT91SAM9G45_ID_DMA	21	/* DMA Controller */
+#define AT91SAM9G45_ID_UHPHS	22	/* USB Host High Speed */
+#define AT91SAM9G45_ID_LCDC	23	/* LCD Controller */
+#define AT91SAM9G45_ID_AC97C	24	/* AC97 Controller */
+#define AT91SAM9G45_ID_EMAC	25	/* Ethernet MAC */
+#define AT91SAM9G45_ID_ISI	26	/* Image Sensor Interface */
+#define AT91SAM9G45_ID_UDPHS	27	/* USB Device High Speed */
+#define AT91SAM9G45_ID_AESTDESSHA 28	/* AES + T-DES + SHA */
+#define AT91SAM9G45_ID_MCI1	29	/* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9G45_ID_VDEC	30	/* Video Decoder */
+#define AT91SAM9G45_ID_IRQ0	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9G45_BASE_UDPHS		0xfff78000
+#define AT91SAM9G45_BASE_TC0		0xfff7c000
+#define AT91SAM9G45_BASE_TC1		0xfff7c040
+#define AT91SAM9G45_BASE_TC2		0xfff7c080
+#define AT91SAM9G45_BASE_MCI0		0xfff80000
+#define AT91SAM9G45_BASE_TWI0		0xfff84000
+#define AT91SAM9G45_BASE_TWI1		0xfff88000
+#define AT91SAM9G45_BASE_US0		0xfff8c000
+#define AT91SAM9G45_BASE_US1		0xfff90000
+#define AT91SAM9G45_BASE_US2		0xfff94000
+#define AT91SAM9G45_BASE_US3		0xfff98000
+#define AT91SAM9G45_BASE_SSC0		0xfff9c000
+#define AT91SAM9G45_BASE_SSC1		0xfffa0000
+#define AT91SAM9G45_BASE_SPI0		0xfffa4000
+#define AT91SAM9G45_BASE_SPI1		0xfffa8000
+#define AT91SAM9G45_BASE_AC97C		0xfffac000
+#define AT91SAM9G45_BASE_TSC		0xfffb0000
+#define AT91SAM9G45_BASE_ISI		0xfffb4000
+#define AT91SAM9G45_BASE_PWMC		0xfffb8000
+#define AT91SAM9G45_BASE_EMAC		0xfffbc000
+#define AT91SAM9G45_BASE_AES		0xfffc0000
+#define AT91SAM9G45_BASE_TDES		0xfffc4000
+#define AT91SAM9G45_BASE_SHA		0xfffc8000
+#define AT91SAM9G45_BASE_TRNG		0xfffcc000
+#define AT91SAM9G45_BASE_MCI1		0xfffd0000
+#define AT91SAM9G45_BASE_TC3		0xfffd4000
+#define AT91SAM9G45_BASE_TC4		0xfffd4040
+#define AT91SAM9G45_BASE_TC5		0xfffd4080
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_DDRSDRC1	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC	(0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9G45_BASE_US0
+#define AT91_USART1	AT91SAM9G45_BASE_US1
+#define AT91_USART2	AT91SAM9G45_BASE_US2
+#define AT91_USART3	AT91SAM9G45_BASE_US3
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9G45_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9G45_SRAM_SIZE	SZ_64K		/* Internal SRAM size (64Kb) */
+
+#define AT91SAM9G45_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9G45_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
+
+#define AT91SAM9G45_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91SAM9G45_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
+#define AT91SAM9G45_HCI_BASE	0x00700000	/* USB Host controller (OHCI) */
+#define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
+#define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+/*
+ * Cpu Name
+ */
+#define AT91_CPU_NAME	"AT91SAM9G45"
+
+#endif

include/asm-arm/arch-at91/at91sam9g45_matrix.h

+/*
+ * Matrix-centric header file for the AT91SAM9M1x family
+ *
+ *  Copyright (C) 2008 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_MATRIX_H
+#define AT91SAM9G45_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+#define			AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
+#define			AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
+#define			AT91_MATRIX_ULBT_128		(7 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0x1ff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x110)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+#define		AT91_MATRIX_TCM_NWS		(0x1 << 11)	/* Wait state TCM register */
+#define			AT91_MATRIX_TCM_NO_WS		(0x0 << 11)
+#define			AT91_MATRIX_TCM_ONE_WS		(0x1 << 11)
+
+#define AT91_MATRIX_VIDEO	(AT91_MATRIX + 0x118)	/* Video Mode Configuration Register */
+#define		AT91C_VDEC_SEL			(0x1 <<  0) /* Video Mode Selection */
+#define			AT91C_VDEC_SEL_OFF		(0 << 0)
+#define			AT91C_VDEC_SEL_ON		(1 << 0)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x128)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF0		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF1		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
+#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
+#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
+#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
+#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
+#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
+#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
+
+#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
+#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
+#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
+#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
+#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
+#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
+#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
+#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
+#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
+
+#endif

include/asm-arm/arch-at91/clk.h

@@ -49,6 +49,11 @@ static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
 	return get_mck_clk_rate();
 }
 
+static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
+{
+	return get_mck_clk_rate();
+}
+
 static inline unsigned long get_twi_clk_rate(unsigned int dev_id)
 {
 	return get_mck_clk_rate();

include/asm-arm/arch-at91/hardware.h

@@ -23,7 +23,7 @@
 #define AT91_BASE_SPI	AT91SAM9260_BASE_SPI0
 #define AT91_ID_UHP	AT91SAM9260_ID_UHP
 #define AT91_PMC_UHP	AT91SAM926x_PMC_UHP
-#elif defined(CONFIG_AT91SAM9261)
+#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
 #include <asm/arch/at91sam9261.h>
 #define AT91_BASE_SPI	AT91SAM9261_BASE_SPI0
 #define AT91_ID_UHP	AT91SAM9261_ID_UHP
@@ -37,6 +37,12 @@
 #include <asm/arch/at91sam9rl.h>
 #define AT91_BASE_SPI	AT91SAM9RL_BASE_SPI
 #define AT91_ID_UHP	AT91SAM9RL_ID_UHP
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#include <asm/arch/at91sam9g45.h>
+#define AT91_BASE_EMAC  AT91SAM9G45_BASE_EMAC
+#define AT91_BASE_SPI   AT91SAM9G45_BASE_SPI0
+#define AT91_ID_UHP     AT91SAM9G45_ID_UHPHS
+#define AT91_PMC_UHP    AT91SAM926x_PMC_UHP
 #elif defined(CONFIG_AT91CAP9)
 #include <asm/arch/at91cap9.h>
 #define AT91_BASE_SPI	AT91CAP9_BASE_SPI0

include/asm-arm/arch-at91/memory-map.h

@@ -30,5 +30,6 @@
 #define USART1_BASE AT91_USART1
 #define USART2_BASE AT91_USART2
 #define USART3_BASE (AT91_BASE_SYS + AT91_DBGU)
+#define SPI0_BASE	AT91_BASE_SPI
 
 #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */

include/asm-arm/arch-kirkwood/kirkwood.h

@@ -45,7 +45,7 @@
 #define KW_REG_UNDOC_0x1478		(KW_REGISTER(0x1478))
 
 #define KW_UART0_BASE			(KW_REGISTER(0x12000))
-#define KW_UART1_BASE			(KW_REGISTER(0x13000))
+#define KW_UART1_BASE			(KW_REGISTER(0x12100))
 #define KW_MPP_BASE			(KW_REGISTER(0x10000))
 #define KW_GPIO0_BASE			(KW_REGISTER(0x10100))
 #define KW_GPIO1_BASE			(KW_REGISTER(0x10140))

include/asm-arm/arch-pxa/pxa-regs.h

@@ -1952,12 +1952,13 @@ typedef void		(*ExcpHndlr) (void) ;
 #define CKENA_2_USBHOST	(1 << 2)	/* USB Host Unit Clock Enable */
 #define CKENA_1_LCD	(1 << 1)	/* LCD Unit Clock Enable */
 
-#define CKENB_8_1WIRE	((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */
-#define CKENB_7_GPIO	((1 << 7) + 32)	/* GPIO Clock Enable */
-#define CKENB_6_IRQ	((1 << 6) + 32)	/* Interrupt Controller Clock Enable */
-#define CKENB_4_I2C	((1 << 4) + 32)	/* I2C Unit Clock Enable */
-#define CKENB_1_PWM1	((1 << 1) + 32)	/* PWM2 & PWM3 Clock Enable */
-#define CKENB_0_PWM0	((1 << 0) + 32)	/* PWM0 & PWM1 Clock Enable */
+#define CKENB_9_SYSBUS2	(1 << 9)	/* System bus 2 */
+#define CKENB_8_1WIRE	(1 << 8)	/* One Wire Interface Unit Clock Enable */
+#define CKENB_7_GPIO	(1 << 7)	/* GPIO Clock Enable */
+#define CKENB_6_IRQ	(1 << 6)	/* Interrupt Controller Clock Enable */
+#define CKENB_4_I2C	(1 << 4)	/* I2C Unit Clock Enable */
+#define CKENB_1_PWM1	(1 << 1)	/* PWM2 & PWM3 Clock Enable */
+#define CKENB_0_PWM0	(1 << 0)	/* PWM0 & PWM1 Clock Enable */
 
 #else /* if defined CONFIG_CPU_MONAHANS */
 

include/asm-sh/clk.h

+/*
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_SH_CLK_H__
+#define __ASM_SH_CLK_H__
+
+static inline unsigned long get_peripheral_clk_rate(void)
+{
+	return CONFIG_SYS_CLK_FREQ;
+}
+
+static inline unsigned long get_tmu0_clk_rate(void)
+{
+	return CONFIG_SYS_CLK_FREQ;
+}
+
+#endif /* __ASM_SH_CLK_H__ */

include/asm-sh/macro.h

@@ -29,7 +29,7 @@
 
 .macro	write16, addr, data
 	mov.l \addr ,r1
-	mov.l \data ,r0
+	mov.w \data ,r0
 	mov.w r0, @r1
 .endm
 

include/common.h

@@ -275,7 +275,8 @@ void	pci_init_board(void);
 void	pciinfo	      (int, int);
 
 #if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
-    int	   pci_pre_init	       (struct pci_controller * );
+    int	   pci_pre_init	       (struct pci_controller *);
+    int	   is_pci_host	       (struct pci_controller *);
 #endif
 
 #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
@@ -285,7 +286,6 @@ void	pciinfo	      (int, int);
 #   if defined(CONFIG_SYS_PCI_MASTER_INIT)
 	void	pci_master_init	     (struct pci_controller *);
 #   endif
-    int	    is_pci_host		(struct pci_controller *);
 #if defined(CONFIG_440SPE) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
     defined(CONFIG_405EX)

include/configs/HIDDEN_DRAGON.h

@@ -103,9 +103,7 @@
 #define PCI_ENET1_MEMADDR	0x81000000
 
 #define CONFIG_RTL8139
-#define _IO_BASE	    0x00000000
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)	    (x)
+
 /* Make sure the ethaddr can be overwritten
    TODO: Remove this on final product
 */

include/configs/M5253DEMO.h

@@ -85,7 +85,6 @@
 #	define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
 #	define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers */
 #	define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers */
-#	define _IO_BASE			0
 #endif
 
 #define CONFIG_NET_MULTI		1

include/configs/M5253EVBE.h

@@ -91,7 +91,6 @@
 #define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
 #define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers */
 #define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers */
-#define _IO_BASE		0
 
 #define CONFIG_SYS_PROMPT		"=> "
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */

include/configs/M54455EVB.h

@@ -180,7 +180,6 @@
 #define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
 #define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers           */
 #define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers                 */
-#define _IO_BASE		0
 
 /* Realtime clock */
 #define CONFIG_MCFRTC

include/configs/MPC8349ITX.h

@@ -360,16 +360,9 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_PCI2_IO_SIZE	0x01000000	/* 16M */
 #endif
 
-#define _IO_BASE		0x00000000	/* points to PCI I/O space */
-
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)	    (x)
-#endif
-
 #ifndef CONFIG_PCI_PNP
     #define PCI_ENET0_IOADDR	0x00000000
     #define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI2_MEM_BASE

include/configs/MPC8536DS.h

@@ -427,12 +427,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #undef CONFIG_TULIP
 #undef CONFIG_RTL8139
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)		({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
-#define _IO_BASE	0x00000000
-#endif
-
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BUS
 	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_IO_BUS

include/configs/MPC8544DS.h

@@ -340,12 +340,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #undef CONFIG_TULIP
 #define CONFIG_RTL8139
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)		(x)
-#define _IO_BASE	0x00000000
-#endif
-
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BUS
 	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_IO_BUS

include/configs/MPC8572DS.h

@@ -484,12 +484,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #undef CONFIG_TULIP
 #undef CONFIG_RTL8139
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)		(x)
-#define _IO_BASE	0x00000000
-#endif
-
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCIE3_IO_BUS
 	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCIE3_IO_BUS

include/configs/MPC8610HPCD.h

@@ -280,10 +280,6 @@
 #define CONFIG_SYS_PCI1_IO_VIRT	0xe1000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
 
-/* For RTL8139 */
-#define KSEG1ADDR(x)	({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); })
-#define _IO_BASE		0x00000000
-
 /* controller 1, Base address 0xa000 */
 #define CONFIG_SYS_PCIE1_MEM_BUS	0xa0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BUS

include/configs/MPC8641HPCN.h

@@ -348,10 +348,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 				 | CONFIG_SYS_PHYS_ADDR_HIGH)
 #define CONFIG_SYS_PCI1_IO_SIZE	0x00010000	/* 64K */
 
-/* For RTL8139 */
-#define KSEG1ADDR(x)		({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
-#define _IO_BASE		0x00000000
-
 #ifdef CONFIG_PHYS_64BIT
 /*
  * Use the same PCI bus address on PCI1 and PCI2 if we have PHYS_64BIT.

include/configs/MVBLM7.h

@@ -193,8 +193,6 @@
 #define CONFIG_SYS_PCI1_IO_PHYS	0xE2000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x01000000
 
-#define _IO_BASE		0x00000000
-
 #define CONFIG_NET_MULTI	1
 #define CONFIG_NET_RETRY_COUNT	3
 

include/configs/MigoR.h

@@ -141,7 +141,7 @@
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
-#define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ		1000
 
 #endif	/* __MIGO_R_H */

include/configs/P2020DS.h

@@ -519,12 +519,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #undef CONFIG_TULIP
 #define CONFIG_RTL8139
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)		(x)
-#define _IO_BASE	0x00000000
-#endif
-
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCIE3_IO_BUS
 	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCIE3_IO_BUS

include/configs/ap325rxa.h

@@ -170,7 +170,7 @@
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
-#define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ		1000
 
 #endif	/* __AP325RXA_H */

include/configs/at91sam9261ek.h

@@ -32,8 +32,11 @@
 #define CONFIG_SYS_HZ		1000
 
 #define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#ifdef CONFIG_AT91SAM9G10EK
+#define CONFIG_AT91SAM9G10	1	/* It's an Atmel AT91SAM9G10 SoC*/
+#else
 #define CONFIG_AT91SAM9261	1	/* It's an Atmel AT91SAM9261 SoC*/
-#define CONFIG_AT91SAM9261EK	1	/* on an AT91SAM9261EK Board	*/
+#endif
 #define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
 
@@ -62,7 +65,11 @@
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
 #define CONFIG_SYS_WHITE_ON_BLACK		1
 #define CONFIG_ATMEL_LCD		1
+#ifdef CONFIG_AT91SAM9261EK
 #define CONFIG_ATMEL_LCD_BGR555		1
+#else
+#define	CONFIG_AT91SAM9G10_LCD_BASE		0x23E00000	/* LCD is no more in SRAM */
+#endif
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
 
 /* LED */
@@ -147,7 +154,11 @@
 #define CONFIG_DOS_PARTITION		1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9261_UHP_BASE */
+#ifdef CONFIG_AT91SAM9G10EK
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g10"
+#else
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
+#endif
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 #define CONFIG_USB_STORAGE		1
 #define CONFIG_CMD_FAT			1

include/configs/at91sam9m10g45ek.h

+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_MAIN_CLOCK		12000000	/* from 12 MHz crystal */
+#define CONFIG_SYS_HZ		1000
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#ifdef CONFIG_AT91SAM9M10G45EK
+#define CONFIG_AT91SAM9M10G45	1	/* It's an Atmel AT91SAM9M10G45 SoC*/
+#else
+#define CONFIG_AT91SAM9G45	1	/* It's an Atmel AT91SAM9G45 SoC*/
+#endif
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD			1
+#define LCD_BPP				LCD_COLOR8
+#define CONFIG_LCD_LOGO			1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO			1
+#define CONFIG_LCD_INFO_BELOW_LOGO	1
+#define CONFIG_SYS_WHITE_ON_BLACK		1
+#define CONFIG_ATMEL_LCD		1
+#define CONFIG_ATMEL_LCD_RGB565		1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
+/* board specific(not enough SRAM) */
+#define CONFIG_AT91SAM9G45_LCD_BASE		0x73E00000
+
+/* LED */
+#define CONFIG_AT91_LED
+#define	CONFIG_RED_LED		AT91_PIN_PD31	/* this is the user1 led */
+#define	CONFIG_GREEN_LED	AT91_PIN_PD0	/* this is the user2 led */
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x70000000
+#define PHYS_SDRAM_SIZE			0x08000000	/* 128 megs */
+
+/* DataFlash */
+#ifdef CONFIG_ATMEL_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH		1
+#define CONFIG_SPI_FLASH_ATMEL		1
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS	1
+#endif
+
+/* NOR flash, if populated */
+#ifndef CONFIG_CMD_NAND
+#define CONFIG_SYS_NO_FLASH		1
+#else
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define PHYS_FLASH_1			0x10000000
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT		256
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#endif
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_MAX_CHIPS			1
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB			1
+#define CONFIG_RMII			1
+#define CONFIG_NET_MULTI		1
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_RESET_PHY_R		1
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW		1
+#define CONFIG_DOS_PARTITION		1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00700000	/* AT91SAM9G45_UHP_OHCI_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g45"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE		1
+
+#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x23e00000
+
+#ifdef CONFIG_SYS_USE_DATAFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_SPI_FLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(0xC0000000 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(0xC0000000 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_ENV_SECT_SIZE		0x10000
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock0 " \
+				"mtdparts=at91_nand:-(root) "\
+				"rw rootfstype=jffs2"
+
+#else /* CONFIG_SYS_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x72000000 0x200000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock5 " \
+				"mtdparts=at91_nand:128k(bootstrap)ro, \
+				256k(uboot)ro,128k(env1)ro,128k(env2)ro, \
+				2M(linux),-(root) " \
+				"rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif

include/configs/blackstamp.h

@@ -83,10 +83,9 @@
 #endif
 
 #define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET	0x4000
+#define CONFIG_ENV_OFFSET	0x40000
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_ENV_SECT_SIZE	0x40000
-#define ENV_IS_EMBEDDED_CUSTOM
 
 /*
  * SDRAM settings & memory map
@@ -245,9 +244,9 @@
  * Serial Flash Infomation
  */
 #define CONFIG_BFIN_SPI
-/* For the M25P64 SCK Should be Kept < 20Mhz */
-#define CONFIG_ENV_SPI_MAX_HZ	20000000
-#define CONFIG_SF_DEFAULT_SPEED	20000000
+/* For the M25P64 SCK Should be Kept < 15Mhz */
+#define CONFIG_ENV_SPI_MAX_HZ	15000000
+#define CONFIG_SF_DEFAULT_SPEED	15000000
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 

include/configs/cm-bf561.h

@@ -60,8 +60,13 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK	1
+/* The next 2 lines are for use with DEV-BF5xx */
 #define CONFIG_DRIVER_SMC91111	1
 #define CONFIG_SMC91111_BASE	0x28000300
+/* The next 3 lines are for use with EXT-BF5xx-USB-ETH2 */
+/* #define CONFIG_DRIVER_SMC911X 1 */
+/* #define CONFIG_DRIVER_SMC911X_BASE 0x24080000 // AMS1 */
+/* #define CONFIG_DRIVER_SMC911X_32_BIT 1 */
 #define CONFIG_HOSTNAME		cm-bf561
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR	02:80:ad:20:31:cf */

include/configs/espt.h

+/*
+ * Configuation settings for the ESPT-GIGA board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ESPT_H
+#define __ESPT_H
+
+#define CONFIG_SH		1
+#define CONFIG_SH4		1
+#define CONFIG_CPU_SH7763	1
+#define CONFIG_ESPT	1
+#define __LITTLE_ENDIAN		1
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SAVEENV
+
+#define CONFIG_BOOTDELAY        -1
+#define CONFIG_BOOTARGS         "console=ttySC0,115200 root=1f01"
+#define CONFIG_ENV_OVERWRITE    1
+
+#define CONFIG_VERSION_VARIABLE
+#undef  CONFIG_SHOW_BOOT_PROGRESS
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE		1
+#define CONFIG_BAUDRATE         115200
+#define CONFIG_CONS_SCIF0		1
+
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256	/* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE		256	/* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS		16	/* max args accepted for monitor commands */
+#define CONFIG_SYS_BARGSIZE	512	/* Buffer size for Boot Arguments
+								passed to kernel */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate
+												settings for this board */
+
+/* SDRAM */
+#define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
+#define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
+
+/* Flash(NOR) S29JL064H */
+#define CONFIG_SYS_FLASH_BASE		(0xA0000000)
+#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT)
+#define CONFIG_SYS_MAX_FLASH_BANKS (1)
+#define CONFIG_SYS_MAX_FLASH_SECT  (150)
+
+/* U-boot setting */
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
+/* Size of DRAM reserved for malloc() use */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#undef  CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
+/* Timeout for Flash erase operations (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
+/* Timeout for Flash write operations (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
+/* Timeout for Flash set sector lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT		(3 * 1000)
+/* Timeout for Flash clear lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
+/* Use hardware flash sectors protection instead of U-Boot software protection */
+#undef  CONFIG_SYS_FLASH_PROTECTION
+#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
+/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
+#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+
+/* Clock */
+#define CONFIG_SYS_CLK_FREQ	66666666
+#define CONFIG_SYS_TMU_CLK_DIV      4
+#define CONFIG_SYS_HZ       1000
+
+/* Ether */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_SH_ETHER 1
+#define CONFIG_SH_ETHER_USE_PORT (1)
+#define CONFIG_SH_ETHER_PHY_ADDR (0x00)
+
+#endif /* __SH7763RDP_H */

include/configs/mpc7448hpc2.h

@@ -124,8 +124,6 @@
 
 /* Networking Configuration */
 
-#define KSEG1ADDR(a)	(a)	/* Needed by the rtl8139 driver */
-
 #define CONFIG_TSI108_ETH
 #define CONFIG_TSI108_ETH_NUM_PORTS	2
 
@@ -303,8 +301,6 @@
 
 #define CONFIG_SYS_PCI_IO_SIZE		0x01000000	/* 16MB */
 
-#define _IO_BASE		0x00000000	/* points to PCI I/O space      */
-
 /* PCI Config Space mapping */
 #define CONFIG_SYS_PCI_CFG_BASE	0xfb000000	/* Changed from FE000000 */
 #define CONFIG_SYS_PCI_CFG_SIZE	0x01000000	/* 16MB */

include/configs/mpr2.h

@@ -82,8 +82,8 @@
 
 /* Clocks */
 #define CONFIG_SYS_CLK_FREQ	24000000
-#define TMU_CLK_DIVIDER		4	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV		4	/* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ		1000
 
 /* UART */
 #define CONFIG_SCIF_CONSOLE	1

include/configs/ms7720se.h

@@ -101,8 +101,8 @@
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
-#define TMU_CLK_DIVIDER		4	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV		4	/* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ		1000
 
 /* PCMCIA */
 #define CONFIG_IDE_PCMCIA	1

include/configs/ms7722se.h

@@ -128,7 +128,7 @@
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
-#define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ		1000
 
 #endif	/* __MS7722SE_H */

include/configs/ms7750se.h

@@ -101,7 +101,7 @@
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
-#define TMU_CLK_DIVIDER		4
-#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV		4
+#define CONFIG_SYS_HZ		1000
 
 #endif /* __MS7750SE_H */

include/configs/r2dplus.h

@@ -80,8 +80,8 @@
  * SuperH Clock setting
  */
 #define CONFIG_SYS_CLK_FREQ	60000000
-#define TMU_CLK_DIVIDER		4
-#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV		4
+#define CONFIG_SYS_HZ		1000
 #define	CONFIG_SYS_PLL_SETTLING_TIME	100/* in us */
 
 /*
@@ -123,7 +123,5 @@
  */
 #define CONFIG_NET_MULTI
 #define CONFIG_RTL8139
-#define _IO_BASE		0x00000000
-#define KSEG1ADDR(x)		(x)
 
 #endif /* __CONFIG_H */

include/configs/r7780mp.h

@@ -121,8 +121,8 @@
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
-#define TMU_CLK_DIVIDER		4
-#define CONFIG_SYS_HZ	(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV		4
+#define CONFIG_SYS_HZ		1000
 
 /* PCI Controller */
 #if defined(CONFIG_CMD_PCI)
@@ -144,6 +144,9 @@
 #define CONFIG_PCI_IO_BUS	0xFE200000	/* IO space base address */
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x00200000	/* Size of IO window */
+#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_BUS  CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
 #endif /* CONFIG_CMD_PCI */
 
 #if defined(CONFIG_CMD_NET)

include/configs/sh7763rdp.h

@@ -114,8 +114,8 @@
 
 /* Clock */
 #define CONFIG_SYS_CLK_FREQ	66666666
-#define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ				(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ		1000
 
 /* Ether */
 #define CONFIG_NET_MULTI 1

include/configs/sh7785lcr.h

@@ -186,7 +186,7 @@
 /* Board Clock */
 /* The SCIF used external clock. system clock only used timer. */
 #define CONFIG_SYS_CLK_FREQ	50000000
-#define TMU_CLK_DIVIDER		4
-#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV		4
+#define CONFIG_SYS_HZ		1000
 
 #endif	/* __SH7785LCR_H */

include/pci_ids.h

@@ -1519,6 +1519,8 @@
 #define PCI_DEVICE_ID_AUREAL_VORTEX_1	0x0001
 #define PCI_DEVICE_ID_AUREAL_VORTEX_2	0x0002
 
+#define PCI_VENDOR_ID_ESDGMBH		0x12fe
+
 #define PCI_VENDOR_ID_CBOARDS		0x1307
 #define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001
 

include/usb/ehci-fsl.h

@@ -85,7 +85,7 @@
 #define MPC83XX_SCCR_USB_DRCM_01	0x00100000
 #define MPC83XX_SCCR_USB_DRCM_10	0x00200000
 
-#if defined(CONFIG_MPC83XX)
+#if defined(CONFIG_MPC83xx)
 #define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC83xx_USB_ADDR
 #elif defined(CONFIG_MPC85xx)
 #define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC85xx_USB_ADDR

lib_blackfin/Makefile

@@ -40,6 +40,7 @@ COBJS-y	+= board.o
 COBJS-y	+= boot.o
 COBJS-y	+= cache.o
 COBJS-y	+= clocks.o
+COBJS-$(CONFIG_CMD_CACHE_DUMP) += cmd_cache_dump.o
 COBJS-y	+= muldi3.o
 COBJS-$(CONFIG_POST) += post.o tests.o
 COBJS-y	+= string.o

sh_config.mk

@@ -22,3 +22,6 @@
 #
 
 PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__
+PLATFORM_LDFLAGS += -e $(TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE)
+
+LDSCRIPT := $(SRCTREE)/cpu/$(CPU)/u-boot.lds