net: Move CONFIG_RTL8139 to Kconfig

Introduce CONFIG_RTL8139 in Kconfig and move over boards' defconfig
to use that.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
[trini: Fixup MPC8641HPCN* and r2dplus configs]
Signed-off-by: NTom Rini <trini@konsulko.com>

configs/MPC8544DS_defconfig

@@ -5,5 +5,6 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
+CONFIG_RTL8139=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y

configs/MPC8641HPCN_36BIT_defconfig

@@ -5,5 +5,6 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PHYS_64BIT"
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_RTL8139=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y

configs/MPC8641HPCN_defconfig

@@ -4,5 +4,6 @@ CONFIG_TARGET_MPC8641HPCN=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_RTL8139=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y

configs/r2dplus_defconfig

 CONFIG_SH=y
 CONFIG_TARGET_R2DPLUS=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_RTL8139=y
 CONFIG_USE_PRIVATE_LIBGCC=y

drivers/net/Kconfig

@@ -102,6 +102,12 @@ config PCH_GBE
 	  This MAC is present in Intel Platform Controller Hub EG20T. It
 	  supports 10/100/1000 Mbps operation.
 
+config RTL8139
+	bool "Realtek 8139 series Ethernet controller driver"
+	help
+	  This driver supports Realtek 8139 series fast ethernet family of
+	  PCI chipsets/adapters.
+
 config XILINX_AXIEMAC
 	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
 	select PHYLIB

include/configs/MPC8536DS.h

@@ -527,7 +527,6 @@
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
-#undef CONFIG_RTL8139
 
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BUS

include/configs/MPC8544DS.h

@@ -298,7 +298,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
-#define CONFIG_RTL8139
 
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BUS

include/configs/MPC8572DS.h

@@ -490,7 +490,6 @@
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
-#undef CONFIG_RTL8139
 
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCIE3_IO_BUS

include/configs/MPC8641HPCN.h

@@ -362,7 +362,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
-#define CONFIG_RTL8139
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP

include/configs/r2dplus.h

@@ -110,9 +110,4 @@
 #define CONFIG_PCI_SYS_PHYS	(CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
 #define CONFIG_PCI_SYS_SIZE	CONFIG_SYS_SDRAM_SIZE
 
-/*
- * Network device (RTL8139) support
- */
-#define CONFIG_RTL8139
-
 #endif /* __CONFIG_H */