board: sl28: drop unneeded and outdated flash partitions

This board doesn't use the MTD subsystem in u-boot, thus there is no
need to specify the partitions. They are outdated anyway. Just drop
them.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

arch/arm/dts/fsl-ls1028a-kontron-sl28.dts

@@ -72,61 +72,6 @@
 		/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
 		spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
 		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
-
-		partition@0 {
-			reg = <0x000000 0x010000>;
-			label = "rcw";
-			read-only;
-		};
-
-		partition@10000 {
-			reg = <0x010000 0x0f0000>;
-			label = "failsafe bootloader";
-			read-only;
-		};
-
-		partition@100000 {
-			reg = <0x100000 0x040000>;
-			label = "failsafe DP firmware";
-			read-only;
-		};
-
-		partition@140000 {
-			reg = <0x140000 0x0a0000>;
-			label = "failsafe trusted firmware";
-			read-only;
-		};
-
-		partition@1e0000 {
-			reg = <0x1e0000 0x020000>;
-			label = "reserved";
-			read-only;
-		};
-
-		partition@200000 {
-			reg = <0x200000 0x010000>;
-			label = "configuration store";
-		};
-
-		partition@210000 {
-			reg = <0x210000 0x0f0000>;
-			label = "bootloader";
-		};
-
-		partition@300000 {
-			reg = <0x300000 0x040000>;
-			label = "DP firmware";
-		};
-
-		partition@340000 {
-			reg = <0x340000 0x0a0000>;
-			label = "trusted firmware";
-		};
-
-		partition@3e0000 {
-			reg = <0x3e0000 0x020000>;
-			label = "bootloader environment";
-		};
 	};
 };