sunxi: Enable both ehci and otg in host mode on various boards

Now that the device-model port of the musb mode makes it possible, enable
both the ehci and otg in host mode on boards where the musb is wired up in
host only mode, either via an usb-a receptacle or via an usb <-> sata
converter.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NMarek Vasut <marex@denx.de>
Acked-by: NIan Campbell <ijc@hellion.org.uk>

configs/CSQ_CS908_defconfig

@@ -15,3 +15,4 @@ CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y

configs/Mele_A1000G_quad_defconfig

@@ -17,3 +17,4 @@ CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_DLDO4_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y

configs/Mini-X_defconfig

@@ -9,3 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PB9"

configs/ba10_tv_box_defconfig

@@ -12,3 +12,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PB9"