提交 77102823 编写于 作者: S Samuel Holland 提交者: Andre Przywara

ARM: dts: sun50i: A64: Sync from Linux v5.18-rc1

Copy the devicetree source for the A64 SoC and all existing boards
from the Linux v5.18-rc1 tag.

To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 189bef235dd3 and 73088dfee635.

This update should not impact any existing U-Boot functionality.
Signed-off-by: NSamuel Holland <samuel@sholland.org>
上级 7024755b
......@@ -10,7 +10,7 @@
interrupt-controller;
#interrupt-cells = <1>;
ac_power_supply: ac-power-supply {
ac_power_supply: ac-power {
compatible = "x-powers,axp803-ac-power-supply",
"x-powers,axp813-ac-power-supply";
status = "disabled";
......@@ -26,18 +26,18 @@
gpio-controller;
#gpio-cells = <2>;
gpio0_ldo: gpio0-ldo {
gpio0_ldo: gpio0-ldo-pin {
pins = "GPIO0";
function = "ldo";
};
gpio1_ldo: gpio1-ldo {
gpio1_ldo: gpio1-ldo-pin {
pins = "GPIO1";
function = "ldo";
};
};
battery_power_supply: battery-power-supply {
battery_power_supply: battery-power {
compatible = "x-powers,axp803-battery-power-supply",
"x-powers,axp813-battery-power-supply";
status = "disabled";
......@@ -147,7 +147,7 @@
};
};
usb_power_supply: usb-power-supply {
usb_power_supply: usb-power {
compatible = "x-powers,axp803-usb-power-supply",
"x-powers,axp813-usb-power-supply";
status = "disabled";
......
......@@ -4,7 +4,7 @@
*/
/ {
cpu0_opp_table: opp_table0 {
cpu0_opp_table: opp-table-cpu {
compatible = "operating-points-v2";
opp-shared;
......
......@@ -343,7 +343,7 @@
&spi0 {
status = "okay";
spi-flash@0 {
flash@0 {
compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
......
......@@ -15,6 +15,7 @@
/ {
model = "Pinebook";
compatible = "pine64,pinebook", "allwinner,sun50i-a64";
chassis-type = "laptop";
aliases {
serial0 = &uart0;
......
......@@ -12,6 +12,8 @@
#include <dt-bindings/pwm/pwm.h>
/ {
chassis-type = "handset";
aliases {
ethernet0 = &rtl8723cs;
serial0 = &uart0;
......@@ -25,6 +27,11 @@
/* Backlight configuration differs per PinePhone revision. */
};
bt_sco_codec: bt-sco-codec {
#sound-dai-cells = <1>;
compatible = "linux,bt-sco";
};
chosen {
stdout-path = "serial0:115200n8";
};
......@@ -91,6 +98,8 @@
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&aif3_pins>;
status = "okay";
};
......@@ -426,6 +435,7 @@
&sound {
status = "okay";
simple-audio-card,name = "PinePhone";
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
simple-audio-card,widgets = "Microphone", "Headset Microphone",
"Microphone", "Internal Microphone",
......@@ -447,6 +457,23 @@
"MIC1", "Internal Microphone",
"Headset Microphone", "HBIAS",
"MIC2", "Headset Microphone";
simple-audio-card,dai-link@2 {
format = "dsp_a";
frame-master = <&link2_codec>;
bitclock-master = <&link2_codec>;
bitclock-inversion;
link2_cpu: cpu {
sound-dai = <&bt_sco_codec 0>;
};
link2_codec: codec {
sound-dai = <&codec 2>;
dai-tdm-slot-num = <1>;
dai-tdm-slot-width = <32>;
};
};
};
&uart0 {
......
......@@ -16,6 +16,7 @@
/ {
model = "PineTab, Development Sample";
compatible = "pine64,pinetab", "allwinner,sun50i-a64";
chassis-type = "tablet";
aliases {
serial0 = &uart0;
......@@ -35,6 +36,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "c";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
i2c-csi {
compatible = "i2c-gpio";
sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
......@@ -77,7 +89,7 @@
sound-name-prefix = "Speaker Amp";
};
vdd_bl: regulator@0 {
vdd_bl: regulator {
compatible = "regulator-fixed";
regulator-name = "bl-3v3";
regulator-min-microvolt = <3300000>;
......@@ -410,6 +422,21 @@
regulator-name = "vcc-rtc";
};
&simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&sound {
status = "okay";
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
......
......@@ -14,6 +14,7 @@
/ {
model = "Olimex A64 Teres-I";
compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64";
chassis-type = "laptop";
aliases {
serial0 = &uart0;
......@@ -139,6 +140,8 @@
#size-cells = <0>;
port@0 {
reg = <0>;
anx6345_in: endpoint {
remote-endpoint = <&tcon0_out_anx6345>;
};
......@@ -206,7 +209,6 @@
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
};
};
......
......@@ -102,6 +102,22 @@
status = "disabled";
};
gpu_opp_table: opp-table-gpu {
compatible = "operating-points-v2";
opp-120000000 {
opp-hz = /bits/ 64 <120000000>;
};
opp-312000000 {
opp-hz = /bits/ 64 <312000000>;
};
opp-432000000 {
opp-hz = /bits/ 64 <432000000>;
};
};
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -131,12 +147,10 @@
};
sound: sound {
#address-cells = <1>;
#size-cells = <0>;
compatible = "simple-audio-card";
simple-audio-card,name = "sun50i-a64-audio";
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&cpudai>;
simple-audio-card,bitclock-master = <&cpudai>;
simple-audio-card,mclk-fs = <128>;
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
"Left DAC", "DACL",
......@@ -145,12 +159,19 @@
"ADCR", "Right ADC";
status = "disabled";
cpudai: simple-audio-card,cpu {
sound-dai = <&dai>;
};
simple-audio-card,dai-link@0 {
format = "i2s";
frame-master = <&link0_cpu>;
bitclock-master = <&link0_cpu>;
mclk-fs = <128>;
link0_cpu: cpu {
sound-dai = <&dai>;
};
link_codec: simple-audio-card,codec {
sound-dai = <&codec>;
link0_codec: codec {
sound-dai = <&codec 0>;
};
};
};
......@@ -658,6 +679,18 @@
interrupt-controller;
#interrupt-cells = <3>;
/omit-if-no-ref/
aif2_pins: aif2-pins {
pins = "PB4", "PB5", "PB6", "PB7";
function = "aif2";
};
/omit-if-no-ref/
aif3_pins: aif3-pins {
pins = "PG10", "PG11", "PG12", "PG13";
function = "aif3";
};
csi_pins: csi-pins {
pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
"PE7", "PE8", "PE9", "PE10", "PE11";
......@@ -798,6 +831,23 @@
};
};
timer@1c20c00 {
compatible = "allwinner,sun50i-a64-timer",
"allwinner,sun8i-a23-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
wdt0: watchdog@1c20ca0 {
compatible = "allwinner,sun50i-a64-wdt",
"allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-a64-spdif",
......@@ -878,7 +928,7 @@
};
codec: codec@1c22e00 {
#sound-dai-cells = <0>;
#sound-dai-cells = <1>;
compatible = "allwinner,sun50i-a64-codec",
"allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x600>;
......@@ -1067,6 +1117,7 @@
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
clock-names = "bus", "core";
resets = <&ccu RST_BUS_GPU>;
operating-points-v2 = <&gpu_opp_table>;
};
gic: interrupt-controller@1c81000 {
......@@ -1093,8 +1144,14 @@
mbus: dram-controller@1c62000 {
compatible = "allwinner,sun50i-a64-mbus";
reg = <0x01c62000 0x1000>;
clocks = <&ccu 112>;
reg = <0x01c62000 0x1000>,
<0x01c63000 0x1000>;
reg-names = "mbus", "dram";
clocks = <&ccu CLK_MBUS>,
<&ccu CLK_DRAM>,
<&ccu CLK_BUS_DRAM>;
clock-names = "mbus", "dram", "bus";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
dma-ranges = <0x00000000 0x40000000 0xc0000000>;
......@@ -1167,8 +1224,8 @@
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
<&ccu CLK_HDMI>;
clock-names = "iahb", "isfr", "tmds";
<&ccu CLK_HDMI>, <&rtc 0>;
clock-names = "iahb", "isfr", "tmds", "cec";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
......@@ -1321,13 +1378,5 @@
#address-cells = <1>;
#size-cells = <0>;
};
wdt0: watchdog@1c20ca0 {
compatible = "allwinner,sun50i-a64-wdt",
"allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册