board_f: x86: Use checkcpu() for CPU init

At present we misuse print_cpuinfo() do so CPU init on x86. This is done
because it is the next available call after the console is enabled. But
several arches use checkcpu() instead. Despite the horrible name (which
we can fix), it seems a better choice.

Adjust the various x86 CPU implementations to move their init code into
checkcpu() and use print_cpuinfo() only for printing CPU info.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NStefan Roese <sr@denx.de>

arch/x86/cpu/broadwell/cpu.c

@@ -131,10 +131,8 @@ int arch_cpu_init(void)
 	return x86_cpu_init_f();
 }
 
-int print_cpuinfo(void)
+int checkcpu(void)
 {
-	char processor_name[CPU_MAX_NAME_LEN];
-	const char *name;
 	int ret;
 
 	set_max_freq();
@@ -144,6 +142,14 @@ int print_cpuinfo(void)
 		return ret;
 	gd->arch.pei_boot_mode = PEI_BOOT_NONE;
 
+	return 0;
+}
+
+int print_cpuinfo(void)
+{
+	char processor_name[CPU_MAX_NAME_LEN];
+	const char *name;
+
 	/* Print processor name */
 	name = cpu_get_name(processor_name);
 	printf("CPU:   %s\n", name);

arch/x86/cpu/coreboot/coreboot.c

@@ -34,6 +34,11 @@ int board_early_init_f(void)
 	return 0;
 }
 
+int checkcpu(void)
+{
+	return 0;
+}
+
 int print_cpuinfo(void)
 {
 	return default_print_cpuinfo();

arch/x86/cpu/efi/efi.c

@@ -18,6 +18,11 @@ int board_early_init_f(void)
 	return 0;
 }
 
+int checkcpu(void)
+{
+	return 0;
+}
+
 int print_cpuinfo(void)
 {
 	return default_print_cpuinfo();

arch/x86/cpu/ivybridge/cpu.c

@@ -74,7 +74,7 @@ int arch_cpu_init_dm(void)
 	/*
 	 * We should do as little as possible before the serial console is
 	 * up. Perhaps this should move to later. Our next lot of init
-	 * happens in print_cpuinfo() when we have a console
+	 * happens in checkcpu() when we have a console
 	 */
 	ret = set_flex_ratio_to_tdp_nominal();
 	if (ret)
@@ -125,12 +125,10 @@ static void enable_usb_bar(struct udevice *bus)
 	pci_bus_write_config(bus, usb3, PCI_COMMAND, cmd, PCI_SIZE_32);
 }
 
-int print_cpuinfo(void)
+int checkcpu(void)
 {
 	enum pei_boot_mode_t boot_mode = PEI_BOOT_NONE;
-	char processor_name[CPU_MAX_NAME_LEN];
 	struct udevice *dev, *lpc;
-	const char *name;
 	uint32_t pm1_cnt;
 	uint16_t pm1_sts;
 	int ret;
@@ -182,6 +180,14 @@ int print_cpuinfo(void)
 
 	gd->arch.pei_boot_mode = boot_mode;
 
+	return 0;
+}
+
+int print_cpuinfo(void)
+{
+	char processor_name[CPU_MAX_NAME_LEN];
+	const char *name;
+
 	/* Print processor name */
 	name = cpu_get_name(processor_name);
 	printf("CPU:   %s\n", name);

arch/x86/cpu/qemu/qemu.c

@@ -148,6 +148,12 @@ int arch_cpu_init(void)
 
 #if !CONFIG_IS_ENABLED(EFI_STUB) && \
 	!CONFIG_IS_ENABLED(SPL_X86_32BIT_INIT)
+
+int checkcpu(void)
+{
+	return 0;
+}
+
 int print_cpuinfo(void)
 {
 	post_code(POST_CPU_INFO);

arch/x86/cpu/quark/quark.c

@@ -264,6 +264,11 @@ int arch_cpu_init_dm(void)
 	return 0;
 }
 
+int checkcpu(void)
+{
+	return 0;
+}
+
 int print_cpuinfo(void)
 {
 	post_code(POST_CPU_INFO);

arch/x86/cpu/x86_64/cpu.c

@@ -67,6 +67,11 @@ int misc_init_r(void)
 	return 0;
 }
 
+int checkcpu(void)
+{
+	return 0;
+}
+
 int print_cpuinfo(void)
 {
 	return 0;

arch/x86/lib/efi/efi.c

@@ -125,6 +125,11 @@ void dram_init_banksize(void)
 	}
 }
 
+int checkcpu(void)
+{
+	return 0;
+}
+
 int print_cpuinfo(void)
 {
 	return default_print_cpuinfo();

arch/x86/lib/fsp/fsp_common.c

@@ -14,6 +14,11 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+int checkcpu(void)
+{
+	return 0;
+}
+
 int print_cpuinfo(void)
 {
 	post_code(POST_CPU_INFO);

common/board_f.c

@@ -842,7 +842,8 @@ static const init_fnc_t init_sequence_f[] = {
 	console_init_f,		/* stage 1 init of console */
 	display_options,	/* say that we are here */
 	display_text_info,	/* show debugging info if required */
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SH)
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SH) || \
+		defined(CONFIG_X86)
 	checkcpu,
 #endif
 #if defined(CONFIG_DISPLAY_CPUINFO)