ARM: highbank: setup peripherals based on power domain status

Accessing powered down peripherals will hang the bus, so check power
domain status before initializing SATA and fixup the FDT to disable
unused peripherals.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

board/highbank/highbank.c

@@ -23,13 +23,21 @@
 #include <asm/sizes.h>
 #include <asm/io.h>
 
+#define HB_AHCI_BASE			0xffe08000
+
 #define HB_SREG_A9_PWR_REQ		0xfff3cf00
 #define HB_SREG_A9_BOOT_SRC_STAT	0xfff3cf04
+#define HB_SREG_A9_PWRDOM_STAT		0xfff3cf20
+
 #define HB_PWR_SUSPEND			0
 #define HB_PWR_SOFT_RESET		1
 #define HB_PWR_HARD_RESET		2
 #define HB_PWR_SHUTDOWN			3
 
+#define PWRDOM_STAT_SATA		0x80000000
+#define PWRDOM_STAT_PCI			0x40000000
+#define PWRDOM_STAT_EMMC		0x20000000
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /*
@@ -58,9 +66,12 @@ int misc_init_r(void)
 {
 	char envbuffer[16];
 	u32 boot_choice;
+	u32 reg = readl(HB_SREG_A9_PWRDOM_STAT);
 
-	ahci_init(0xffe08000);
-	scsi_scan(1);
+	if (reg & PWRDOM_STAT_SATA) {
+		ahci_init(HB_AHCI_BASE);
+		scsi_scan(1);
+	}
 
 	boot_choice = readl(HB_SREG_A9_BOOT_SRC_STAT) & 0xff;
 	sprintf(envbuffer, "bootcmd%d", boot_choice);
@@ -85,6 +96,22 @@ void dram_init_banksize(void)
 	gd->bd->bi_dram[0].size =  PHYS_SDRAM_1_SIZE;
 }
 
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *fdt, bd_t *bd)
+{
+	static const char disabled[] = "disabled";
+	u32 reg = readl(HB_SREG_A9_PWRDOM_STAT);
+
+	if (!(reg & PWRDOM_STAT_SATA))
+		do_fixup_by_compat(fdt, "calxeda,hb-ahci", "status",
+			disabled, sizeof(disabled), 1);
+
+	if (!(reg & PWRDOM_STAT_EMMC))
+		do_fixup_by_compat(fdt, "calxeda,hb-sdhci", "status",
+			disabled, sizeof(disabled), 1);
+}
+#endif
+
 void reset_cpu(ulong addr)
 {
 	writel(HB_PWR_HARD_RESET, HB_SREG_A9_PWR_REQ);

include/configs/highbank.h

@@ -27,6 +27,7 @@
 #define CONFIG_SYS_HZ			CFG_HZ
 
 #define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
 #define CONFIG_FIT
 #define CONFIG_SUPPORT_RAW_INITRD
 #define CONFIG_SYS_BOOTMAPSZ		(16 << 20)