ARM: dts: rmobile: Extract SDHI extras on H3 and M3W ULCB

The SDHI nodes are missing features supported in upstream U-Boot,
like mode support properties. Pull the extras into U-Boot specific
DT until it hits mainline Linux, to make syncing of DTs easier.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
V2: Rebase on u-boot/master

arch/arm/dts/r8a7795-h3ulcb-u-boot.dts

@@ -18,3 +18,24 @@
 		gpio-sstbz = <&gpio2 3 0>;
 	};
 };
+
+&sdhi2_pins {
+	groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+	power-source = <1800>;
+};
+
+&sdhi2_pins_uhs {
+	groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+};
+
+&sdhi0 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+};
+
+&sdhi2 {
+	mmc-hs400-1_8v;
+	max-frequency = <200000000>;
+};

arch/arm/dts/r8a7796-m3ulcb-u-boot.dts

@@ -18,3 +18,24 @@
 		gpio-sstbz = <&gpio2 3 0>;
 	};
 };
+
+&sdhi2_pins {
+	groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+	power-source = <1800>;
+};
+
+&sdhi2_pins_uhs {
+	groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+};
+
+&sdhi0 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+};
+
+&sdhi2 {
+	mmc-hs400-1_8v;
+	max-frequency = <200000000>;
+};

arch/arm/dts/ulcb.dtsi

@@ -299,13 +299,13 @@
 	};
 
 	sdhi2_pins: sd2 {
-		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+		groups = "sdhi2_data8", "sdhi2_ctrl";
 		function = "sdhi2";
-		power-source = <1800>;
+		power-source = <3300>;
 	};
 
 	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+		groups = "sdhi2_data8", "sdhi2_ctrl";
 		function = "sdhi2";
 		power-source = <1800>;
 	};
@@ -387,12 +387,8 @@
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
 	sd-uhs-sdr50;
-	sd-uhs-sdr104;
 	status = "okay";
-	max-frequency = <208000000>;
 };
 
 &sdhi2 {
@@ -405,10 +401,8 @@
 	vqmmc-supply = <&reg_1p8v>;
 	bus-width = <8>;
 	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
 	non-removable;
 	status = "okay";
-	max-frequency = <200000000>;
 };
 
 &ssi1 {