secure_boot: include/configs: move definition of CONFIG_CMD_BLOB

CONFIG_CMD_BLOB must be defined in case of Secure Boot. It was
earlier defined in all config files. The definition has been
moved to a common file which is included by all configs.
Signed-off-by: NAneesh Bansal <aneesh.bansal@nxp.com>
Acked-by: NRuchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

arch/arm/include/asm/fsl_secure_boot.h

@@ -9,6 +9,7 @@
 
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_ESBC_VALIDATE
+#define CONFIG_CMD_BLOB
 #define CONFIG_FSL_SEC_MON
 #define CONFIG_SHA_PROG_HW_ACCEL
 #define CONFIG_RSA

arch/powerpc/include/asm/fsl_secure_boot.h

@@ -10,6 +10,7 @@
 
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_ESBC_VALIDATE
+#define CONFIG_CMD_BLOB
 #define CONFIG_FSL_SEC_MON
 #define CONFIG_SHA_PROG_HW_ACCEL
 #define CONFIG_DM

include/configs/B4860QDS.h

@@ -924,8 +924,4 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __CONFIG_H */

include/configs/BSC9132QDS.h

@@ -722,8 +722,4 @@ combinations. this should be removed later
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __CONFIG_H */

include/configs/C29XPCIE.h

@@ -567,8 +567,4 @@
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __CONFIG_H */

include/configs/P1010RDB.h

@@ -952,8 +952,4 @@ extern unsigned long get_sdram_size(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __CONFIG_H */

include/configs/P2041RDB.h

@@ -756,8 +756,4 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __CONFIG_H */

include/configs/T102xQDS.h

@@ -946,8 +946,4 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __T1024QDS_H */

include/configs/T102xRDB.h

@@ -958,8 +958,4 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __T1024RDB_H */

include/configs/T1040QDS.h

@@ -837,8 +837,4 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __CONFIG_H */

include/configs/T104xRDB.h

@@ -940,8 +940,4 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __CONFIG_H */

include/configs/T208xQDS.h

@@ -935,9 +935,4 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#undef CONFIG_CMD_USB
-#endif
-
 #endif	/* __T208xQDS_H */

include/configs/T208xRDB.h

@@ -891,9 +891,4 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#undef CONFIG_CMD_USB
-#endif
-
 #endif	/* __T2080RDB_H */

include/configs/T4240QDS.h

@@ -644,8 +644,4 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __CONFIG_H */

include/configs/T4240RDB.h

@@ -837,13 +837,4 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-/* Secure Boot target was not getting build for T4240 because of
- * increased binary size. So the size is being reduced by removing USB
- * which is anyways not used in Secure Environment.
- */
-#undef CONFIG_CMD_USB
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __CONFIG_H */

include/configs/corenet_ds.h

@@ -765,8 +765,4 @@
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __CONFIG_H */

include/configs/ls1021aqds.h

@@ -666,8 +666,4 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif

include/configs/ls1021atwr.h

@@ -524,8 +524,4 @@
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif