armv7: add appropriate headers for assembly functions

Use ENTRY and ENDPROC with assembly functions to ensure
necessary assembler directives for all functions.
Signed-off-by: NAneesh V <aneesh@ti.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>

arch/arm/cpu/armv7/mx5/lowlevel_init.S

@@ -22,6 +22,7 @@
 #include <config.h>
 #include <asm/arch/imx-regs.h>
 #include <generated/asm-offsets.h>
+#include <linux/linkage.h>
 
 /*
  * L2CC Cache setup/invalidation/disable
@@ -326,8 +327,7 @@
 
 .section ".text.init", "x"
 
-.globl lowlevel_init
-lowlevel_init:
+ENTRY(lowlevel_init)
 #if defined(CONFIG_MX51)
 	ldr r0, =GPIO1_BASE_ADDR
 	ldr r1, [r0, #0x0]
@@ -348,6 +348,7 @@ lowlevel_init:
 
 	/* r12 saved upper lr*/
 	mov pc,lr
+ENDPROC(lowlevel_init)
 
 /* Board level setting value */
 W_DP_OP_864:              .word DP_OP_864

arch/arm/cpu/armv7/mx6/lowlevel_init.S

@@ -18,7 +18,8 @@
  */
 .section ".text.init", "x"
 
-.globl lowlevel_init
-lowlevel_init:
+#include <linux/linkage.h>
 
+ENTRY(lowlevel_init)
 	mov pc, lr
+ENDPROC(lowlevel_init)

arch/arm/cpu/armv7/omap-common/lowlevel_init.S

@@ -27,9 +27,9 @@
  */
 
 #include <asm/arch/omap.h>
+#include <linux/linkage.h>
 
-.global save_boot_params
-save_boot_params:
+ENTRY(save_boot_params)
 	/*
 	 * See if the rom code passed pointer is valid:
 	 * It is not valid if it is not in non-secure SRAM
@@ -76,10 +76,9 @@ save_boot_params:
 	strb	r2, [r3, #CH_FLAGS_OFFSET]
 1:
 	bx	lr
+ENDPROC(save_boot_params)
 
-
-.globl lowlevel_init
-lowlevel_init:
+ENTRY(lowlevel_init)
 	/*
 	 * Setup a temporary stack
 	 */
@@ -95,12 +94,13 @@ lowlevel_init:
 	 */
 	bl	s_init
 	pop	{ip, pc}
+ENDPROC(lowlevel_init)
 
-.globl set_pl310_ctrl_reg
-set_pl310_ctrl_reg:
+ENTRY(set_pl310_ctrl_reg)
 	PUSH	{r4-r11, lr}	@ save registers - ROM code may pollute
 				@ our registers
 	LDR	r12, =0x102	@ Set PL310 control register - value in R0
 	.word	0xe1600070	@ SMC #0 - hand assembled because -march=armv5
 				@ call ROM Code API to set control register
 	POP	{r4-r11, pc}
+ENDPROC(set_pl310_ctrl_reg)

arch/arm/cpu/armv7/omap3/lowlevel_init.S

@@ -31,22 +31,22 @@
 #include <version.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/clocks_omap3.h>
+#include <linux/linkage.h>
 
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE	/* sdram load addr from config.mk */
 
 #ifdef CONFIG_SPL_BUILD
-.global save_boot_params
-save_boot_params:
+ENTRY(save_boot_params)
 	ldr	r4, =omap3_boot_device
 	ldr	r5, [r0, #0x4]
 	and	r5, r5, #0xff
 	str	r5, [r4]
 	bx	lr
+ENDPROC(save_boot_params)
 #endif
 
-.global omap3_gp_romcode_call
-omap3_gp_romcode_call:
+ENTRY(omap3_gp_romcode_call)
 	PUSH {r4-r12, lr} @ Save all registers from ROM code!
 	MOV r12, r0	@ Copy the Service ID in R12
 	MOV r0, r1	@ Copy parameter to R0
@@ -55,6 +55,7 @@ omap3_gp_romcode_call:
 	.word	0xe1600070	@ SMC #0 to enter monitor - hand assembled
 				@ because we use -march=armv5
 	POP {r4-r12, pc}
+ENDPROC(omap3_gp_romcode_call)
 
 /*
  * Funtion for making PPA HAL API calls in secure devices
@@ -62,8 +63,7 @@ omap3_gp_romcode_call:
  *	R0 - Service ID
  *	R1 - paramer list
  */
-.global do_omap3_emu_romcode_call
-do_omap3_emu_romcode_call:
+ENTRY(do_omap3_emu_romcode_call)
 	PUSH {r4-r12, lr} @ Save all registers from ROM code!
 	MOV r12, r0	@ Copy the Secure Service ID in R12
 	MOV r3, r1	@ Copy the pointer to va_list in R3
@@ -76,14 +76,14 @@ do_omap3_emu_romcode_call:
 	.word	0xe1600071	@ SMC #1 to call PPA service - hand assembled
 				@ because we use -march=armv5
 	POP {r4-r12, pc}
+ENDPROC(do_omap3_emu_romcode_call)
 
 #if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT)
 /**************************************************************************
  * cpy_clk_code: relocates clock code into SRAM where its safer to execute
  * R1 = SRAM destination address.
  *************************************************************************/
-.global cpy_clk_code
- cpy_clk_code:
+ENTRY(cpy_clk_code)
 	/* Copy DPLL code into SRAM */
 	adr	r0, go_to_speed		/* get addr of clock setting code */
 	mov	r2, #384		/* r2 size to copy (div by 32 bytes) */
@@ -95,6 +95,7 @@ next2:
 	cmp	r0, r2			/* until source end address [r2] */
 	bne	next2
 	mov	pc, lr			/* back to caller */
+ENDPROC(cpy_clk_code)
 
 /* ***************************************************************************
  *  go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
@@ -109,8 +110,7 @@ next2:
  *        L3 when its not in self refresh seems bad for it.  Normally, this
  *	  code runs from flash before SDR is init so that should be ok.
  ****************************************************************************/
-.global go_to_speed
- go_to_speed:
+ENTRY(go_to_speed)
 	stmfd sp!, {r4 - r6}
 
 	/* move into fast relock bypass */
@@ -171,6 +171,7 @@ wait2:
 	nop
 	ldmfd	sp!, {r4 - r6}
 	mov	pc, lr		/* back to caller, locked */
+ENDPROC(go_to_speed)
 
 _go_to_speed: .word go_to_speed
 
@@ -211,8 +212,7 @@ pll_div_val5:
 
 #endif
 
-.globl lowlevel_init
-lowlevel_init:
+ENTRY(lowlevel_init)
 	ldr	sp, SRAM_STACK
 	str	ip, [sp]	/* stash old link register */
 	mov	ip, lr		/* save link reg across call */
@@ -230,6 +230,7 @@ lowlevel_init:
 
 	/* back to arch calling code */
 	mov	pc, lr
+ENDPROC(lowlevel_init)
 
 	/* the literal pools origin */
 	.ltorg
@@ -480,22 +481,22 @@ per_36x_dpll_param:
 .word 26000,    432,   12,     9,      16,     9,     4,      3,      1
 .word 38400,    360,   15,     9,      16,     5,     4,      3,      1
 
-.globl get_36x_mpu_dpll_param
-get_36x_mpu_dpll_param:
+ENTRY(get_36x_mpu_dpll_param)
 	adr	r0, mpu_36x_dpll_param
 	mov	pc, lr
+ENDPROC(get_36x_mpu_dpll_param)
 
-.globl get_36x_iva_dpll_param
-get_36x_iva_dpll_param:
+ENTRY(get_36x_iva_dpll_param)
 	adr	r0, iva_36x_dpll_param
 	mov	pc, lr
+ENDPROC(get_36x_iva_dpll_param)
 
-.globl get_36x_core_dpll_param
-get_36x_core_dpll_param:
+ENTRY(get_36x_core_dpll_param)
 	adr	r0, core_36x_dpll_param
 	mov	pc, lr
+ENDPROC(get_36x_core_dpll_param)
 
-.globl get_36x_per_dpll_param
-get_36x_per_dpll_param:
+ENTRY(get_36x_per_dpll_param)
 	adr	r0, per_36x_dpll_param
 	mov	pc, lr
+ENDPROC(get_36x_per_dpll_param)

arch/arm/cpu/armv7/s5pc1xx/cache.S

@@ -25,20 +25,22 @@
 
 .align 5
 
+#include <linux/linkage.h>
+
 #ifndef CONFIG_SYS_L2CACHE_OFF
-.global v7_outer_cache_enable
-v7_outer_cache_enable:
+ENTRY(v7_outer_cache_enable)
 	push	{r0, r1, r2, lr}
 	mrc	15, 0, r3, cr1, cr0, 1
 	orr	r3, r3, #2
 	mcr	15, 0, r3, cr1, cr0, 1
 	pop	{r1, r2, r3, pc}
+ENDPROC(v7_outer_cache_enable)
 
-.global v7_outer_cache_disable
-v7_outer_cache_disable:
+ENTRY(v7_outer_cache_disable)
 	push	{r0, r1, r2, lr}
 	mrc	15, 0, r3, cr1, cr0, 1
 	bic	r3, r3, #2
 	mcr	15, 0, r3, cr1, cr0, 1
 	pop	{r1, r2, r3, pc}
+ENDPROC(v7_outer_cache_disable)
 #endif

arch/arm/cpu/armv7/s5pc1xx/reset.S

@@ -22,12 +22,12 @@
  */
 
 #include <asm/arch/cpu.h>
+#include <linux/linkage.h>
 
 #define S5PC100_SWRESET			0xE0200000
 #define S5PC110_SWRESET			0xE0102000
 
-.globl reset_cpu
-reset_cpu:
+ENTRY(reset_cpu)
 	ldr	r1, =S5PC100_PRO_ID
 	ldr	r2, [r1]
 	ldr	r4, =0x00010000
@@ -45,3 +45,4 @@ reset_cpu:
 	str	r2, [r1]
 _loop_forever:
 	b	_loop_forever
+ENDPROC(reset_cpu)

arch/arm/cpu/armv7/start.S

@@ -33,6 +33,7 @@
 #include <config.h>
 #include <version.h>
 #include <asm/system.h>
+#include <linux/linkage.h>
 
 .globl _start
 _start: b	reset
@@ -172,8 +173,7 @@ call_board_init_f:
  * after relocating the monitor code.
  *
  */
-	.globl	relocate_code
-relocate_code:
+ENTRY(relocate_code)
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
@@ -289,6 +289,7 @@ jump_2_ram:
 
 _board_init_r_ofs:
 	.word board_init_r - _start
+ENDPROC(relocate_code)
 
 /*************************************************************************
  *
@@ -298,8 +299,7 @@ _board_init_r_ofs:
  * CONFIG_SYS_ICACHE_OFF is defined.
  *
  *************************************************************************/
-.globl cpu_init_cp15
-cpu_init_cp15:
+ENTRY(cpu_init_cp15)
 	/*
 	 * Invalidate L1 I/D
 	 */
@@ -325,7 +325,7 @@ cpu_init_cp15:
 #endif
 	mcr	p15, 0, r0, c1, c0, 0
 	mov	pc, lr			@ back to my caller
-
+ENDPROC(cpu_init_cp15)
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 /*************************************************************************
@@ -336,7 +336,7 @@ cpu_init_cp15:
  * setup memory timing
  *
  *************************************************************************/
-cpu_init_crit:
+ENTRY(cpu_init_crit)
 	/*
 	 * Jump to board specific initialization...
 	 * The Mask ROM will have already initialized
@@ -347,6 +347,7 @@ cpu_init_crit:
 	bl	lowlevel_init		@ go setup pll,mux,memory
 	mov	lr, ip			@ restore link
 	mov	pc, lr			@ back to my caller
+ENDPROC(cpu_init_crit)
 #endif
 
 #ifndef CONFIG_SPL_BUILD

arch/arm/cpu/armv7/tegra2/lowlevel_init.S

@@ -25,10 +25,10 @@
 
 #include <config.h>
 #include <version.h>
+#include <linux/linkage.h>
 
 	.align	5
-.global reset_cpu
-reset_cpu:
+ENTRY(reset_cpu)
 	ldr	r1, rstctl			@ get addr for global reset
 						@ reg
 	ldr	r3, [r1]
@@ -39,3 +39,4 @@ _loop_forever:
 	b	_loop_forever
 rstctl:
 	.word	PRM_RSTCTRL
+ENDPROC(reset_cpu)

arch/arm/cpu/armv7/u8500/lowlevel.S

@@ -20,16 +20,17 @@
  */
 
 #include <config.h>
+#include <linux/linkage.h>
 
-.globl lowlevel_init
-lowlevel_init:
+ENTRY(lowlevel_init)
 	mov	pc, lr
+ENDPROC(lowlevel_init)
 
 	.align	5
-.globl reset_cpu
-reset_cpu:
+ENTRY(reset_cpu)
 	ldr r0, =CFG_PRCMU_BASE
 	ldr r1, =0x1
 	str r1, [r0, #0x228]
 _loop_forever:
 	b	_loop_forever
+ENDPROC(reset_cpu)