Merge git://git.denx.de/u-boot-x86

- ACPI changes and fixes to Intel Tangier/Edison
- i8254 beeper fixes

arch/x86/dts/coreboot.dts

@@ -10,6 +10,7 @@
 /include/ "skeleton.dtsi"
 /include/ "serial.dtsi"
 /include/ "keyboard.dtsi"
+/include/ "pcspkr.dtsi"
 /include/ "reset.dtsi"
 /include/ "rtc.dtsi"
 /include/ "tsc_timer.dtsi"

arch/x86/dts/crownbay.dts

@@ -10,6 +10,7 @@
 /include/ "skeleton.dtsi"
 /include/ "serial.dtsi"
 /include/ "keyboard.dtsi"
+/include/ "pcspkr.dtsi"
 /include/ "reset.dtsi"
 /include/ "rtc.dtsi"
 /include/ "tsc_timer.dtsi"

arch/x86/dts/edison.dts

@@ -18,10 +18,12 @@
 
 	aliases {
 		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
 	};
 
 	chosen {
-		stdout-path = &serial0;
+		stdout-path = &serial2;
 	};
 
 	cpus {
@@ -53,7 +55,23 @@
 			  0x01000000 0x0 0x2000 0x2000 0 0xe000>;
 	};
 
-	serial0: serial@ff010180 {
+	serial0: serial@ff010080 {
+		compatible = "intel,mid-uart";
+		reg = <0xff010080 0x100>;
+		reg-shift = <0>;
+		clock-frequency = <29491200>;
+		current-speed = <115200>;
+	};
+
+	serial1: serial@ff010100 {
+		compatible = "intel,mid-uart";
+		reg = <0xff010100 0x100>;
+		reg-shift = <0>;
+		clock-frequency = <29491200>;
+		current-speed = <115200>;
+	};
+
+	serial2: serial@ff010180 {
 		compatible = "intel,mid-uart";
 		reg = <0xff010180 0x100>;
 		reg-shift = <0>;

arch/x86/dts/pcspkr.dtsi

+/ {
+	pcspkr {
+		compatible = "i8254,beeper";
+	};
+};

arch/x86/include/asm/arch-tangier/acpi/southcluster.asl

@@ -179,6 +179,9 @@ Device (PCI0)
                 "\\_SB.PCI0.GPIO", 0, ResourceConsumer, , ) { 112 }
             GpioIo(Exclusive, PullUp, 0, 0, IoRestrictionOutputOnly,
                 "\\_SB.PCI0.GPIO", 0, ResourceConsumer, , ) { 113 }
+
+            FixedDMA(0x000d, 0x0002, Width32bit, )
+            FixedDMA(0x000c, 0x0003, Width32bit, )
         })
 
         Method (_CRS, 0, NotSerialized)
@@ -219,6 +222,17 @@ Device (PCI0)
         {
             Return (STA_VISIBLE)
         }
+
+        Name (RBUF, ResourceTemplate()
+        {
+            FixedDMA(0x0009, 0x0000, Width32bit, )
+            FixedDMA(0x0008, 0x0001, Width32bit, )
+        })
+
+        Method (_CRS, 0, NotSerialized)
+        {
+            Return (RBUF)
+        }
     }
 
     Device (I2C6)

arch/x86/lib/acpi_table.c

@@ -347,7 +347,7 @@ static void acpi_create_spcr(struct acpi_spcr *spcr)
 	uint serial_width;
 	int access_size;
 	int space_id;
-	int ret;
+	int ret = -ENODEV;
 
 	/* Fill out header fields */
 	acpi_fill_header(header, "SPCR");
@@ -355,8 +355,8 @@ static void acpi_create_spcr(struct acpi_spcr *spcr)
 	header->revision = 2;
 
 	/* Read the device once, here. It is reused below */
-	ret = uclass_first_device_err(UCLASS_SERIAL, &dev);
-	if (!ret)
+	dev = gd->cur_serial_dev;
+	if (dev)
 		ret = serial_getinfo(dev, &serial_info);
 	if (ret)
 		serial_info.type = SERIAL_CHIP_UNKNOWN;

arch/x86/lib/i8254.c

@@ -51,6 +51,10 @@ int i8254_enable_beep(uint frequency_hz)
 	if (!frequency_hz)
 		return -EINVAL;
 
+	/* make sure i8254 is setup correctly before generating beeps */
+	outb(PIT_CMD_CTR2 | PIT_CMD_BOTH | PIT_CMD_MODE3,
+	     PIT_BASE + PIT_COMMAND);
+
 	i8254_set_beep_freq(frequency_hz);
 	setio_8(SYSCTL_PORTB, PORTB_BEEP_ENABLE);
 

configs/crownbay_defconfig

@@ -28,6 +28,7 @@ CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_PING=y
 CONFIG_CMD_TIME=y
+CONFIG_CMD_SOUND=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
@@ -41,6 +42,8 @@ CONFIG_REGMAP=y
 CONFIG_SYSCON=y
 CONFIG_CPU=y
 CONFIG_E1000=y
+CONFIG_SOUND=y
+CONFIG_SOUND_I8254=y
 CONFIG_SPI=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y