提交 66223787 编写于 作者: S Sjoerd Simons 提交者: Minkyu Kang

Exynos: Move down common USB configuration

USB is a pretty common feature on exynos 5 board, so it seems sensible
to configure it directly from exynos5-common. As a side-effect this
makes USB available from u-boot on exynos 5420 based boards.

While there enable support for common USB ethernet cards to make it more
likely the default config allows booting for network and enable XHCI on
SMDK5420 which has it defined in the dts but not in its config.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
上级 fb56435f
......@@ -24,10 +24,6 @@
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_EXYNOS
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
/* MMC SPL */
#define CONFIG_EXYNOS_SPL
......
......@@ -174,6 +174,16 @@
#define CONFIG_CMD_GPIO
/* USB */
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
/* USB boot mode */
#define CONFIG_USB_BOOTING
#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070
......
......@@ -22,11 +22,6 @@
#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
/* USB */
#define CONFIG_CMD_USB
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_USB_STORAGE
#define CONFIG_SPL_TEXT_BASE 0x02023400
#define CONFIG_IRAM_STACK 0x02050000
......
......@@ -38,6 +38,4 @@
#define CONFIG_BOARD_REV_GPIO_COUNT 2
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif /* __CONFIG_EXYNOS5420_H */
......@@ -34,6 +34,10 @@
#define CONFIG_IDENT_STRING " for SMDK5420"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
/* USB */
#define CONFIG_USB_XHCI
#define CONFIG_USB_XHCI_EXYNOS
/* DRAM Memory Banks */
#define CONFIG_NR_DRAM_BANKS 7
#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册