Merge tag 'u-boot-amlogic-20190812' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- amlogic: add support for the SEI Robotic SEI510

arch/arm/dts/Makefile

@@ -140,6 +140,7 @@ dtb-$(CONFIG_ARCH_MESON) += \
 	meson-gxm-khadas-vim2.dtb \
 	meson-axg-s400.dtb \
 	meson-g12a-u200.dtb \
+	meson-g12a-sei510.dtb \
 	meson-g12b-odroid-n2.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \

arch/arm/dts/meson-g12a-sei510.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "seirobotics,sei510", "amlogic,g12a";
+	model = "SEI Robotics SEI510";
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-onoff {
+			label = "On/Off";
+			linux,code = <KEY_POWER>;
+			press-threshold-microvolt = <1700000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	mono_dac: audio-codec-0 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "U16";
+		sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
+	};
+
+	dmics: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+		status = "okay";
+		sound-name-prefix = "MIC";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddao_3v3_t: regultor-vddao_3v3_t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddio_ao1v8: regulator-vddio_ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		/* TEE Reserved Memory */
+		bl32_reserved: bl32@5000000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12A-SEI510";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
+				 <&tdmin_a>, <&tdmin_b>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TODDR_A IN 4", "PDM Capture",
+				"TODDR_B IN 4", "PDM Capture",
+				"TODDR_C IN 4", "PDM Capture",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* internal speaker interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&mono_dac>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec@0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* internal digital mics */
+		dai-link-8 {
+			sound-dai = <&pdm>;
+
+			codec {
+				sound-dai = <&dmics>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-9 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
+		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
+		    <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};

arch/arm/include/asm/arch-meson/sm.h

@@ -12,4 +12,22 @@ ssize_t meson_sm_read_efuse(uintptr_t offset, void *buffer, size_t size);
 
 int meson_sm_get_serial(void *buffer, size_t size);
 
+enum {
+	REBOOT_REASON_COLD = 0,
+	REBOOT_REASON_NORMAL = 1,
+	REBOOT_REASON_RECOVERY = 2,
+	REBOOT_REASON_UPDATE = 3,
+	REBOOT_REASON_FASTBOOT = 4,
+	REBOOT_REASON_SUSPEND_OFF = 5,
+	REBOOT_REASON_HIBERNATE = 6,
+	REBOOT_REASON_BOOTLOADER = 7,
+	REBOOT_REASON_SHUTDOWN_REBOOT = 8,
+	REBOOT_REASON_RPMBP = 9,
+	REBOOT_REASON_CRASH_DUMP = 11,
+	REBOOT_REASON_KERNEL_PANIC = 12,
+	REBOOT_REASON_WATCHDOG_REBOOT = 13,
+};
+
+int meson_sm_get_reboot_reason(void);
+
 #endif /* __MESON_SM_H__ */

arch/arm/mach-meson/board-common.c

@@ -14,6 +14,11 @@
 #include <asm/unaligned.h>
 #include <efi_loader.h>
 
+#if CONFIG_IS_ENABLED(FASTBOOT)
+#include <asm/psci.h>
+#include <fastboot.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 __weak int board_init(void)
@@ -142,7 +147,35 @@ int board_late_init(void)
 	return meson_board_late_init();
 }
 
+#if CONFIG_IS_ENABLED(FASTBOOT)
+static unsigned int reboot_reason = REBOOT_REASON_NORMAL;
+
+int fastboot_set_reboot_flag()
+{
+	reboot_reason = REBOOT_REASON_BOOTLOADER;
+
+	printf("Using reboot reason: 0x%x\n", reboot_reason);
+
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+	struct pt_regs regs;
+
+	regs.regs[0] = ARM_PSCI_0_2_FN_SYSTEM_RESET;
+	regs.regs[1] = reboot_reason;
+
+	printf("Rebooting with reason: 0x%lx\n", regs.regs[1]);
+
+	smc_call(&regs);
+
+	while (1)
+		;
+}
+#else
 void reset_cpu(ulong addr)
 {
 	psci_system_reset();
 }
+#endif

arch/arm/mach-meson/sm.c

@@ -8,6 +8,10 @@
 #include <common.h>
 #include <asm/arch/sm.h>
 #include <linux/kernel.h>
+#include <dm.h>
+#include <linux/bitfield.h>
+#include <regmap.h>
+#include <syscon.h>
 
 #define FN_GET_SHARE_MEM_INPUT_BASE	0x82000020
 #define FN_GET_SHARE_MEM_OUTPUT_BASE	0x82000021
@@ -77,3 +81,132 @@ int meson_sm_get_serial(void *buffer, size_t size)
 
 	return 0;
 }
+
+#define AO_SEC_SD_CFG15		0xfc
+#define REBOOT_REASON_MASK	GENMASK(15, 12)
+
+int meson_sm_get_reboot_reason(void)
+{
+	struct regmap *regmap;
+	int nodeoffset;
+	ofnode node;
+	unsigned int reason;
+
+	/* find the offset of compatible node */
+	nodeoffset = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+						   "amlogic,meson-gx-ao-secure");
+	if (nodeoffset < 0) {
+		printf("%s: failed to get amlogic,meson-gx-ao-secure\n",
+		       __func__);
+		return -ENODEV;
+	}
+
+	/* get regmap from the syscon node */
+	node = offset_to_ofnode(nodeoffset);
+	regmap = syscon_node_to_regmap(node);
+	if (IS_ERR(regmap)) {
+		printf("%s: failed to get regmap\n", __func__);
+		return -EINVAL;
+	}
+
+	regmap_read(regmap, AO_SEC_SD_CFG15, &reason);
+
+	/* The SMC call is not used, we directly use AO_SEC_SD_CFG15 */
+	return FIELD_GET(REBOOT_REASON_MASK, reason);
+}
+
+static int do_sm_serial(cmd_tbl_t *cmdtp, int flag, int argc,
+			char *const argv[])
+{
+	ulong address;
+	int ret;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	address = simple_strtoul(argv[1], NULL, 0);
+
+	ret = meson_sm_get_serial((void *)address, SM_CHIP_ID_SIZE);
+	if (ret)
+		return CMD_RET_FAILURE;
+
+	return CMD_RET_SUCCESS;
+}
+
+#define MAX_REBOOT_REASONS 14
+
+static const char *reboot_reasons[MAX_REBOOT_REASONS] = {
+	[REBOOT_REASON_COLD] = "cold_boot",
+	[REBOOT_REASON_NORMAL] = "normal",
+	[REBOOT_REASON_RECOVERY] = "recovery",
+	[REBOOT_REASON_UPDATE] = "update",
+	[REBOOT_REASON_FASTBOOT] = "fastboot",
+	[REBOOT_REASON_SUSPEND_OFF] = "suspend_off",
+	[REBOOT_REASON_HIBERNATE] = "hibernate",
+	[REBOOT_REASON_BOOTLOADER] = "bootloader",
+	[REBOOT_REASON_SHUTDOWN_REBOOT] = "shutdown_reboot",
+	[REBOOT_REASON_RPMBP] = "rpmbp",
+	[REBOOT_REASON_CRASH_DUMP] = "crash_dump",
+	[REBOOT_REASON_KERNEL_PANIC] = "kernel_panic",
+	[REBOOT_REASON_WATCHDOG_REBOOT] = "watchdog_reboot",
+};
+
+static int do_sm_reboot_reason(cmd_tbl_t *cmdtp, int flag, int argc,
+			char *const argv[])
+{
+	const char *reason_str;
+	char *destarg = NULL;
+	int reason;
+
+	if (argc > 1)
+		destarg = argv[1];
+
+	reason = meson_sm_get_reboot_reason();
+	if (reason < 0)
+		return CMD_RET_FAILURE;
+
+	if (reason >= MAX_REBOOT_REASONS ||
+	    !reboot_reasons[reason])
+		reason_str = "unknown";
+	else
+		reason_str = reboot_reasons[reason];
+
+	if (destarg)
+		env_set(destarg, reason_str);
+	else
+		printf("reboot reason: %s (%x)\n", reason_str, reason);
+
+	return CMD_RET_SUCCESS;
+}
+
+static cmd_tbl_t cmd_sm_sub[] = {
+	U_BOOT_CMD_MKENT(serial, 2, 1, do_sm_serial, "", ""),
+	U_BOOT_CMD_MKENT(reboot_reason, 1, 1, do_sm_reboot_reason, "", ""),
+};
+
+static int do_sm(cmd_tbl_t *cmdtp, int flag, int argc,
+		 char *const argv[])
+{
+	cmd_tbl_t *c;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	/* Strip off leading 'sm' command argument */
+	argc--;
+	argv++;
+
+	c = find_cmd_tbl(argv[0], &cmd_sm_sub[0], ARRAY_SIZE(cmd_sm_sub));
+
+	if (c)
+		return c->cmd(cmdtp, flag, argc, argv);
+	else
+		return CMD_RET_USAGE;
+}
+
+U_BOOT_CMD(
+	sm, 5, 0, do_sm,
+	"Secure Monitor Control",
+	"serial <address> - read chip unique id to memory address\n"
+	"sm reboot_reason [name] - get reboot reason and store to to environment"
+);

board/amlogic/sei510/MAINTAINERS

+SEI510
+M:	Neil Armstrong <narmstrong@baylibre.com>
+S:	Maintained
+L:	u-boot-amlogic@groups.io
+F:	board/amlogic/sei510/
+F:	configs/sei510_defconfig
+F:	include/configs/sei510.h

board/amlogic/sei510/Makefile

+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2016 BayLibre, SAS
+# Author: Neil Armstrong <narmstrong@baylibre.com>
+
+obj-y	:= sei510.o

board/amlogic/sei510/README

+U-Boot for Amlogic SEI510
+=======================
+
+SEI510 is a customer board manufactured by SEI Robotics with the following
+specifications:
+
+ - Amlogic S905X2 ARM Cortex-A53 quad-core SoC
+ - 2GB DDR4 SDRAM
+ - 10/100 Ethernet (Internal PHY)
+ - 1 x USB 3.0 Host
+ - eMMC
+ - SDcard
+ - Infrared receiver
+ - SDIO WiFi Module
+
+Currently the u-boot port supports the following devices:
+ - serial
+ - Ethernet
+ - Regulators
+ - Clock controller
+
+u-boot compilation
+==================
+
+ > export ARCH=arm
+ > export CROSS_COMPILE=aarch64-none-elf-
+ > make sei510_defconfig
+ > make
+
+Image creation
+==============
+
+Amlogic doesn't provide sources for the firmware and for tools needed
+to create the bootloader image, so it is necessary to obtain them from
+the git tree published by the board vendor:
+
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+ > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot
+ > cd amlogic-u-boot
+ > make g12a_u200_v1_defconfig
+ > make
+ > export UBOOTDIR=$PWD
+
+Download the latest Amlogic Buildroot package, and extract it :
+ > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz
+ > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader
+ > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706
+ > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
+
+Go back to mainline U-Boot source tree then :
+ > mkdir fip
+
+ > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
+ > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
+ > cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/
+ > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/
+ > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/
+ > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/
+ > cp $FIPDIR/g12a/ddr3_1d.fw fip/
+ > cp $FIPDIR/g12a/ddr4_1d.fw fip/
+ > cp $FIPDIR/g12a/ddr4_2d.fw fip/
+ > cp $FIPDIR/g12a/diag_lpddr4.fw fip/
+ > cp $FIPDIR/g12a/lpddr4_1d.fw fip/
+ > cp $FIPDIR/g12a/lpddr4_2d.fw fip/
+ > cp $FIPDIR/g12a/piei.fw fip/
+ > cp u-boot.bin fip/bl33.bin
+
+ > sh fip/blx_fix.sh \
+	fip/bl30.bin \
+	fip/zero_tmp \
+	fip/bl30_zero.bin \
+	fip/bl301.bin \
+	fip/bl301_zero.bin \
+	fip/bl30_new.bin \
+	bl30
+
+ > sh fip/blx_fix.sh \
+	fip/bl2.bin \
+	fip/zero_tmp \
+	fip/bl2_zero.bin \
+	fip/acs.bin \
+	fip/bl21_zero.bin \
+	fip/bl2_new.bin \
+	bl2
+
+ > $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
+					--output fip/bl30_new.bin.g12a.enc \
+					--level v3
+ > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
+					--output fip/bl30_new.bin.enc \
+					--level v3 --type bl30
+ > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
+					--output fip/bl31.img.enc \
+					--level v3 --type bl31
+ > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
+					--output fip/bl33.bin.enc \
+					--level v3 --type bl33
+ > $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
+					--output fip/bl2.n.bin.sig
+ > $FIPDIR/g12a/aml_encrypt_g12a --bootmk \
+		--output fip/u-boot.bin \
+		--bl2 fip/bl2.n.bin.sig \
+		--bl30 fip/bl30_new.bin.enc \
+		--bl31 fip/bl31.img.enc \
+		--bl33 fip/bl33.bin.enc \
+		--ddrfw1 fip/ddr4_1d.fw \
+		--ddrfw2 fip/ddr4_2d.fw \
+		--ddrfw3 fip/ddr3_1d.fw \
+		--ddrfw4 fip/piei.fw \
+		--ddrfw5 fip/lpddr4_1d.fw \
+		--ddrfw6 fip/lpddr4_2d.fw \
+		--ddrfw7 fip/diag_lpddr4.fw \
+		--level v3
+
+and then write the image to SD with:
+
+ > DEV=/dev/your_sd_device
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444

board/amlogic/sei510/sei510.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <env_internal.h>
+#include <asm/io.h>
+#include <asm/arch/axg.h>
+#include <asm/arch/sm.h>
+#include <asm/arch/eth.h>
+#include <asm/arch/mem.h>
+
+int misc_init_r(void)
+{
+	meson_eth_init(PHY_INTERFACE_MODE_RMII,
+		       MESON_USE_INTERNAL_RMII_PHY);
+
+	meson_generate_serial_ethaddr();
+
+	env_set("serial#", "AMLG12ASEI510");
+
+	return 0;
+}

configs/sei510_defconfig

+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="sei510"
+CONFIG_SYS_BOARD="sei510"
+CONFIG_ARCH_MESON=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_MESON_G12A=y
+CONFIG_DEBUG_UART_BASE=0xff803000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_IDENT_STRING=" sei510"
+# CONFIG_PSCI_RESET is not set
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_FDT=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_LZ4=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="meson-g12a-sei510"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_PHY_ADDR_ENABLE=y
+CONFIG_PHY_ADDR=8
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MESON_G12A=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
+CONFIG_DEBUG_UART_MESON=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_MESON_SERIAL=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_USB=y
+CONFIG_USB_HOST=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_PHY=y
+CONFIG_MESON_G12A_USB_PHY=y
+CONFIG_DM_USB=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_MESON_G12A=y
+CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x6000000
+CONFIG_CMD_FASTBOOT=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_OF_LIBFDT=y
+CONFIG_EFI_PARTITION=y
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_PART=y
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=2

include/configs/meson64.h

@@ -37,7 +37,9 @@
 
 #define CONFIG_CPU_ARMV8
 #define CONFIG_REMAKE_ELF
+#ifndef CONFIG_ENV_SIZE
 #define CONFIG_ENV_SIZE			0x2000
+#endif
 #define CONFIG_SYS_MAXARGS		32
 #define CONFIG_SYS_MALLOC_LEN		(32 << 20)
 #define CONFIG_SYS_CBSIZE		1024

include/configs/sei510.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for the SEI510
+ *
+ * Copyright (C) 2019 Baylibre, SAS
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SYS_MMC_ENV_DEV	2
+#define CONFIG_SYS_MMC_ENV_PART	1
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_OFFSET	(-0x10000)
+
+#define CACHE_UUID "99207ae6-5207-11e9-999e-6f77a3612069;"
+#define SYSTEM_UUID "99f9b7ac-5207-11e9-8507-c3c037e393f3;"
+#define VENDOR_UUID "9d082802-5207-11e9-954c-cbbce08ba108;"
+#define USERDATA_UUID "9b976e42-5207-11e9-8f16-ff47ac594b22;"
+#define ROOT_UUID "ddb8c3f6-d94d-4394-b633-3134139cc2e0;"
+
+#define PARTS_DEFAULT                                        \
+	"uuid_disk=${uuid_gpt_disk};"  			\
+	"name=boot,size=64M,bootable,uuid=${uuid_gpt_boot};" \
+	"name=cache,size=256M,uuid=" CACHE_UUID             \
+	"name=system,size=1536M,uuid=" SYSTEM_UUID           \
+	"name=vendor,size=256M,uuid=" VENDOR_UUID            \
+	"name=userdata,size=4746M,uuid=" USERDATA_UUID	\
+	"name=rootfs,size=-,uuid=" ROOT_UUID
+
+#define BOOTENV_DEV_FASTBOOT(devtypeu, devtypel, instance) \
+	"bootcmd_fastboot=" \
+		"sm reboot_reason reason;" \
+		"setenv run_fastboot 0;" \
+		"if gpt verify mmc ${mmcdev} ${partitions}; then; " \
+		"else " \
+			"echo Broken MMC partition scheme;" \
+			"setenv run_fastboot 1;" \
+		"fi;" \
+		"if test \"${reason}\" = \"bootloader\" -o " \
+			"\"${reason}\" = \"fastboot\"; then " \
+			"echo Fastboot asked by reboot reason;" \
+			"setenv run_fastboot 1;" \
+		"fi;" \
+		"if test \"${skip_fastboot}\" -eq 1; then " \
+			"echo Fastboot skipped by environment;" \
+			"setenv run_fastboot 0;" \
+		"fi;" \
+		"if test \"${force_fastboot}\" -eq 1; then " \
+			"echo Fastboot forced by environment;" \
+			"setenv run_fastboot 1;" \
+		"fi;" \
+		"if test \"${run_fastboot}\" -eq 1; then " \
+			"echo Running Fastboot...;" \
+			"fastboot 0;" \
+		"fi\0"
+
+#define BOOTENV_DEV_NAME_FASTBOOT(devtypeu, devtypel, instance)	\
+		"fastboot "
+
+/* TOFIX: Run actual recovery instead of fastboot */
+#define BOOTENV_DEV_RECOVERY(devtypeu, devtypel, instance) \
+	"bootcmd_recovery=" \
+		"pinmux dev pinctrl@14;" \
+		"pinmux dev pinctrl@40;" \
+		"sm reboot_reason reason;" \
+		"setenv run_recovery 0;" \
+		"if run check_button; then " \
+			"echo Recovery button is pressed;" \
+			"setenv run_recovery 1;" \
+		"elif test \"${reason}\" = \"recovery\" -o " \
+			  "\"${reason}\" = \"update\"; then " \
+			"echo Recovery asked by reboot reason;" \
+			"setenv run_recovery 1;" \
+		"fi;" \
+		"if test \"${skip_recovery}\" -eq 1; then " \
+			"echo Recovery skipped by environment;" \
+			"setenv run_recovery 0;" \
+		"fi;" \
+		"if test \"${force_recovery}\" -eq 1; then " \
+			"echo Recovery forced by environment;" \
+			"setenv run_recovery 1;" \
+		"fi;" \
+		"if test \"${run_recovery}\" -eq 1; then " \
+			"echo Running Recovery...;" \
+			"fastboot 0;" \
+		"fi\0"
+
+#define BOOTENV_DEV_NAME_RECOVERY(devtypeu, devtypel, instance)	\
+		"recovery "
+
+#define BOOTENV_DEV_SYSTEM(devtypeu, devtypel, instance) \
+	"bootcmd_system=" \
+		"echo Loading Android boot partition...;" \
+		"mmc dev ${mmcdev};" \
+		"setenv bootargs ${bootargs} console=${console} androidboot.serialno=${serial#};" \
+		"part start mmc ${mmcdev} ${bootpart} boot_start;" \
+		"part size mmc ${mmcdev} ${bootpart} boot_size;" \
+		"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
+			"echo Running Android...;" \
+			"bootm ${loadaddr};" \
+		"fi;" \
+		"echo Failed to boot Android...;" \
+		"reset\0"
+
+#define BOOTENV_DEV_NAME_SYSTEM(devtypeu, devtypel, instance)	\
+		"system "
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(ROMUSB, romusb, na)  \
+	func(FASTBOOT, fastboot, na) \
+	func(RECOVERY, recovery, na) \
+	func(SYSTEM, system, na) \
+
+#define CONFIG_EXTRA_ENV_SETTINGS                                     \
+	"partitions=" PARTS_DEFAULT "\0"                              \
+	"mmcdev=2\0"                                                  \
+	"bootpart=1\0"                                                \
+	"gpio_recovery=88\0"                                          \
+	"check_button=gpio input ${gpio_recovery};test $? -eq 0;\0"   \
+	"console=/dev/ttyAML0\0"                                      \
+	"bootargs=no_console_suspend\0"                               \
+	"stdin=" STDIN_CFG "\0"                                       \
+	"stdout=" STDOUT_CFG "\0"                                     \
+	"stderr=" STDOUT_CFG "\0"                                     \
+	"loadaddr=0x01000000\0"                                       \
+	"fdt_addr_r=0x01000000\0"                                     \
+	"scriptaddr=0x08000000\0"                                     \
+	"kernel_addr_r=0x01080000\0"                                  \
+	"pxefile_addr_r=0x01080000\0"                                 \
+	"ramdisk_addr_r=0x13000000\0"                                 \
+	"fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" BOOTENV
+
+#include <configs/meson64.h>
+
+#endif /* __CONFIG_H */