ARM: zynq: Remove PHYLIB from config to defconfig

Move PHYLIB from board config to defconfig Signed-off-by: N Michal Simek <michal.simek@xilinx.com> Reviewed-by: N Jagan Teki <jteki@openedev.com>

ARM: zynq: Remove PHYLIB from config to defconfig
Move PHYLIB from board config to defconfig Signed-off-by: N Michal Simek <michal.simek@xilinx.com> Reviewed-by: N Jagan Teki <jteki@openedev.com>
5df825d4 · Michal Simek · 75507d5d · 5df825d4 · 5df825d4 · 5df825d4
11 changed file
--- a/configs/zynq_microzed_defconfig
+++ b/configs/zynq_microzed_defconfig
@@ -15,4 +15,5 @@ CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHYLIB=y
 CONFIG_ZYNQ_QSPI=y
--- a/configs/zynq_picozed_defconfig
+++ b/configs/zynq_picozed_defconfig
@@ -8,3 +8,4 @@ CONFIG_SPL=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_PHYLIB=y
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -14,4 +14,5 @@ CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHYLIB=y
 CONFIG_ZYNQ_QSPI=y
--- a/configs/zynq_zc706_defconfig
+++ b/configs/zynq_zc706_defconfig
@@ -15,4 +15,5 @@ CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHYLIB=y
 CONFIG_ZYNQ_QSPI=y
--- a/configs/zynq_zc770_xm010_defconfig
+++ b/configs/zynq_zc770_xm010_defconfig
@@ -17,5 +17,6 @@ CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHYLIB=y
 CONFIG_ZYNQ_SPI=y
 CONFIG_ZYNQ_QSPI=y
--- a/configs/zynq_zc770_xm011_defconfig
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -12,3 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011"
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_PHYLIB=y
--- a/configs/zynq_zc770_xm012_defconfig
+++ b/configs/zynq_zc770_xm012_defconfig
@@ -10,3 +10,4 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012"
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_PHYLIB=y
--- a/configs/zynq_zc770_xm013_defconfig
+++ b/configs/zynq_zc770_xm013_defconfig
@@ -12,3 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013"
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_PHYLIB=y
--- a/configs/zynq_zed_defconfig
+++ b/configs/zynq_zed_defconfig
@@ -15,4 +15,5 @@ CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHYLIB=y
 CONFIG_ZYNQ_QSPI=y
--- a/configs/zynq_zybo_defconfig
+++ b/configs/zynq_zybo_defconfig
@@ -11,6 +11,7 @@ CONFIG_FIT_SIGNATURE=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_PHYLIB=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_ZYNQ=y
 CONFIG_DEBUG_UART_BASE=0xe0001000

--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -50,7 +50,6 @@
 # define CONFIG_ZYNQ_GEM
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_PHYLIB
 # define CONFIG_PHY_MARVELL
 # define CONFIG_BOOTP_SERVERIP
 # define CONFIG_BOOTP_BOOTPATH