usb: s3c-otg: Rename usb/s3c_udc.h to usb/dwc2_udc.h

The driver is actually for the Designware DWC2 controller.
This patch renames the global s3c_udc.h header to dwc2_udc.h.

The rename is done automatically:
	$ sed -i "s/s3c_udc\.h/dwc2_udc.h/g" \
		`git grep "s3c_udc\.h" | cut -d : -f 1`
Signed-off-by: NMarek Vasut <marex@denx.de>

board/altera/arria5-socdk/socfpga.c

@@ -9,7 +9,7 @@
 #include <asm/io.h>
 
 #include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <usb_mass_storage.h>
 
 #include <micrel.h>

board/altera/cyclone5-socdk/socfpga.c

@@ -9,7 +9,7 @@
 #include <asm/io.h>
 
 #include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <usb_mass_storage.h>
 
 #include <micrel.h>

board/broadcom/bcm28155_ap/bcm28155_ap.c

@@ -13,7 +13,7 @@
 #include <asm/arch/sysmap.h>
 
 #include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <g_dnl.h>
 
 #define SECWATCHDOG_SDOGCR_OFFSET	0x00000000

board/denx/mcvevk/socfpga.c

@@ -9,7 +9,7 @@
 #include <asm/io.h>
 
 #include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <usb_mass_storage.h>
 
 DECLARE_GLOBAL_DATA_PTR;

board/ebv/socrates/socfpga.c

@@ -9,7 +9,7 @@
 #include <asm/io.h>
 
 #include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <usb_mass_storage.h>
 
 #include <micrel.h>

board/samsung/goni/goni.c

@@ -10,7 +10,7 @@
 #include <asm/gpio.h>
 #include <asm/arch/mmc.h>
 #include <power/pmic.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <asm/arch/cpu.h>
 #include <power/max8998_pmic.h>
 #include <samsung/misc.h>

board/samsung/odroid/odroid.c

@@ -19,7 +19,7 @@
 #include <errno.h>
 #include <mmc.h>
 #include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <samsung/misc.h>
 #include "setup.h"
 

board/samsung/trats/trats.c

@@ -18,7 +18,7 @@
 #include <asm/arch/watchdog.h>
 #include <asm/arch/power.h>
 #include <power/pmic.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <power/max8997_pmic.h>
 #include <power/max8997_muic.h>
 #include <power/battery.h>

board/samsung/trats2/trats2.c

@@ -21,7 +21,7 @@
 #include <libtizen.h>
 #include <errno.h>
 #include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <usb_mass_storage.h>
 
 DECLARE_GLOBAL_DATA_PTR;

board/samsung/universal_c210/universal.c

@@ -17,7 +17,7 @@
 #include <ld9040.h>
 #include <power/pmic.h>
 #include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <asm/arch/cpu.h>
 #include <power/max8998_pmic.h>
 #include <libtizen.h>

board/terasic/sockit/socfpga.c

@@ -9,7 +9,7 @@
 #include <asm/io.h>
 
 #include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <usb_mass_storage.h>
 
 #include <micrel.h>

drivers/usb/gadget/dwc2_udc_otg.c

@@ -46,7 +46,7 @@
 #define DEBUG_OUT_EP 0
 #define DEBUG_IN_EP 0
 
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 
 #define EP0_CON		0
 #define EP_MASK		0xF

drivers/usb/gadget/dwc2_udc_otg_phy.c

@@ -36,7 +36,7 @@
 #include "dwc2_udc_otg_priv.h"
 #include <usb/lin_gadget_compat.h>
 
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 
 void otg_phy_init(struct dwc2_udc *dev)
 {

drivers/usb/gadget/dwc2_udc_otg_priv.h

@@ -14,7 +14,7 @@
 #include <linux/usb/gadget.h>
 #include <linux/list.h>
 #include <usb/lin_gadget_compat.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 
 /*-------------------------------------------------------------------------*/
 /* DMA bounce buffer size, 16K is enough even for mass storage */

include/usb/s3c_udc.h → include/usb/dwc2_udc.h

 /*
- * drivers/usb/gadget/s3c_udc.h
+ * drivers/usb/gadget/dwc2_udc.h
  * Designware DWC2 on-chip full/high speed USB device controllers
  * Copyright (C) 2005 for Samsung Electronics
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __S3C_USB_GADGET
-#define __S3C_USB_GADGET
+#ifndef __DWC2_USB_GADGET
+#define __DWC2_USB_GADGET
 
 #define PHY0_SLEEP              (1 << 5)
 
@@ -22,4 +22,4 @@ struct dwc2_plat_otg_data {
 
 int dwc2_udc_probe(struct dwc2_plat_otg_data *pdata);
 
-#endif
+#endif	/* __DWC2_USB_GADGET */