Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 5c6d2b5a 编写于 作者: P Peter Pearse
浏览文件
操作

Remove the deleted files for the SMN42 patch

上级 b0d8f5bf
展开全部 隐藏空白更改
内联 并排
Showing with 0 addition and 1677 deletion
board/lpc2292sodimm/eth.c 已删除 100644 → 0
浏览文件 @ b0d8f5bf
此差异已折叠。
board/lpc2292sodimm/iap_entry.S 已删除 100644 → 0
浏览文件 @ b0d8f5bf
IAP_ADDRESS: .word 0x7FFFFFF1
.globl iap_entry
iap_entry:
ldr r2, IAP_ADDRESS
bx r2
mov pc, lr
board/lpc2292sodimm/mmc.c 已删除 100644 → 0
浏览文件 @ b0d8f5bf
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <mmc.h>
#include <asm/errno.h>
#include <asm/arch/hardware.h>
#include <part.h>
#include <fat.h>
#include "mmc_hw.h"
#include "spi.h"
#ifdef CONFIG_MMC
#undef MMC_DEBUG
static block_dev_desc_t mmc_dev;
/* these are filled out by a call to mmc_hw_get_parameters */
static int hw_size; /* in kbytes */
static int hw_nr_sects;
static int hw_sect_size; /* in bytes */
block_dev_desc_t * mmc_get_dev(int dev)
{
return (block_dev_desc_t *)(&mmc_dev);
}
unsigned long mmc_block_read(int dev,
unsigned long start,
lbaint_t blkcnt,
unsigned long *buffer)
{
unsigned long rc = 0;
unsigned char *p = (unsigned char *)buffer;
unsigned long i;
unsigned long addr = start;
#ifdef MMC_DEBUG
printf("mmc_block_read: start=%lu, blkcnt=%lu\n", start,
(unsigned long)blkcnt);
#endif
for(i = 0; i < (unsigned long)blkcnt; i++) {
#ifdef MMC_DEBUG
printf("mmc_read_sector: addr=%lu, buffer=%p\n", addr, p);
#endif
(void)mmc_read_sector(addr, p);
rc++;
addr++;
p += hw_sect_size;
}
return rc;
}
/*-----------------------------------------------------------------------------
* Read hardware paramterers (sector size, size, number of sectors)
*/
static int mmc_hw_get_parameters(void)
{
unsigned char csddata[16];
unsigned int sizemult;
unsigned int size;
mmc_read_csd(csddata);
hw_sect_size = 1<<(csddata[5] & 0x0f);
size = ((csddata[6]&0x03)<<10)+(csddata[7]<<2)+(csddata[8]&0xc0);
sizemult = ((csddata[10] & 0x80)>>7)+((csddata[9] & 0x03)<<1);
hw_nr_sects = (size+1)*(1<<(sizemult+2));
hw_size = hw_nr_sects*hw_sect_size/1024;
#ifdef MMC_DEBUG
printf("mmc_hw_get_parameters: hw_sect_size=%d, hw_nr_sects=%d, "
"hw_size=%d\n", hw_sect_size, hw_nr_sects, hw_size);
#endif
return 0;
}
int mmc_init(int verbose)
{
int ret = -ENODEV;
if (verbose)
printf("mmc_init\n");
spi_init();
mmc_hw_init();
mmc_hw_get_parameters();
mmc_dev.if_type = IF_TYPE_MMC;
mmc_dev.part_type = PART_TYPE_DOS;
mmc_dev.dev = 0;
mmc_dev.lun = 0;
mmc_dev.type = 0;
mmc_dev.blksz = hw_sect_size;
mmc_dev.lba = hw_nr_sects;
sprintf((char*)mmc_dev.vendor, "Unknown vendor");
sprintf((char*)mmc_dev.product, "Unknown product");
sprintf((char*)mmc_dev.revision, "N/A");
mmc_dev.removable = 0; /* should be true??? */
mmc_dev.block_read = mmc_block_read;
fat_register_device(&mmc_dev, 1);
ret = 0;
return ret;
}
int mmc_write(uchar * src, ulong dst, int size)
{
#ifdef MMC_DEBUG
printf("mmc_write: src=%p, dst=%lu, size=%u\n", src, dst, size);
#endif
/* Since mmc2info always returns 0 this function will never be called */
return 0;
}
int mmc_read(ulong src, uchar * dst, int size)
{
#ifdef MMC_DEBUG
printf("mmc_read: src=%lu, dst=%p, size=%u\n", src, dst, size);
#endif
/* Since mmc2info always returns 0 this function will never be called */
return 0;
}
int mmc2info(ulong addr)
{
/* This function is used by cmd_cp to determine if source or destination
address resides on MMC-card or not. We do not support copy to and from
MMC-card so we always return 0. */
return 0;
}
#endif /* CONFIG_MMC */
board/lpc2292sodimm/mmc_hw.c 已删除 100644 → 0
浏览文件 @ b0d8f5bf
/*
This code was original written by Ulrich Radig and modified by
Embedded Artists AB (www.embeddedartists.com).
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <asm/arch/hardware.h>
#include "spi.h"
#define MMC_Enable() PUT32(IO1CLR, 1l << 22)
#define MMC_Disable() PUT32(IO1SET, 1l << 22)
#define mmc_spi_cfg() spi_set_clock(8); spi_set_cfg(0, 1, 0);
static unsigned char Write_Command_MMC (unsigned char *CMD);
static void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer,
unsigned short int Bytes);
/* initialize the hardware */
int mmc_hw_init(void)
{
unsigned long a;
unsigned short int Timeout = 0;
unsigned char b;
unsigned char CMD[] = {0x40, 0x00, 0x00, 0x00, 0x00, 0x95};
/* set-up GPIO and SPI */
(*((volatile unsigned long *)PINSEL2)) &= ~(1l << 3); /* clear bit 3 */
(*((volatile unsigned long *)IO1DIR)) |= (1l << 22); /* set bit 22 (output) */
MMC_Disable();
spi_lock();
spi_set_clock(248);
spi_set_cfg(0, 1, 0);
MMC_Enable();
/* waste some time */
for(a=0; a < 20000; a++)
asm("nop");
/* Put the MMC/SD-card into SPI-mode */
for (b = 0; b < 10; b++) /* Sends min 74+ clocks to the MMC/SD-card */
spi_write(0xff);
/* Sends command CMD0 to MMC/SD-card */
while (Write_Command_MMC(CMD) != 1) {
if (Timeout++ > 200) {
MMC_Disable();
spi_unlock();
return(1); /* Abort with command 1 (return 1) */
}
}
/* Sends Command CMD1 an MMC/SD-card */
Timeout = 0;
CMD[0] = 0x41;/* Command 1 */
CMD[5] = 0xFF;
while (Write_Command_MMC(CMD) != 0) {
if (Timeout++ > 200) {
MMC_Disable();
spi_unlock();
return (2); /* Abort with command 2 (return 2) */
}
}
MMC_Disable();
spi_unlock();
return 0;
}
/* ############################################################################
Sends a command to the MMC/SD-card
######################################################################### */
static unsigned char Write_Command_MMC (unsigned char *CMD)
{
unsigned char a, tmp = 0xff;
unsigned short int Timeout = 0;
MMC_Disable();
spi_write(0xFF);
MMC_Enable();
for (a = 0; a < 0x06; a++)
spi_write(*CMD++);
while (tmp == 0xff) {
tmp = spi_read();
if (Timeout++ > 5000)
break;
}
return (tmp);
}
/* ############################################################################
Routine to read the CID register from the MMC/SD-card (16 bytes)
######################################################################### */
void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, unsigned short
int Bytes)
{
unsigned short int a;
spi_lock();
mmc_spi_cfg();
MMC_Enable();
if (Write_Command_MMC(CMD) != 0) {
MMC_Disable();
spi_unlock();
return;
}
while (spi_read() != 0xfe) {};
for (a = 0; a < Bytes; a++)
*Buffer++ = spi_read();
/* Read the CRC-byte */
spi_read(); /* CRC - byte is discarded */
spi_read(); /* CRC - byte is discarded */
/* set MMC_Chip_Select to high (MMC/SD-card Inaktiv) */
MMC_Disable();
spi_unlock();
return;
}
/* ############################################################################
Routine to read a block (512 bytes) from the MMC/SD-card
######################################################################### */
unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer)
{
/* Command 16 to read aBlocks from the MMC/SD - caed */
unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF};
/* The addres on the MMC/SD-card is in bytes,
addr is transformed from blocks to bytes and the result is
placed into the command */
addr = addr << 9; /* addr = addr * 512 */
CMD[1] = ((addr & 0xFF000000) >> 24);
CMD[2] = ((addr & 0x00FF0000) >> 16);
CMD[3] = ((addr & 0x0000FF00) >> 8 );
MMC_Read_Block(CMD, Buffer, 512);
return (0);
}
/* ############################################################################
Routine to write a block (512 byte) to the MMC/SD-card
######################################################################### */
unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer)
{
unsigned char tmp, a;
unsigned short int b;
/* Command 24 to write a block to the MMC/SD - card */
unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF};
/* The addres on the MMC/SD-card is in bytes,
addr is transformed from blocks to bytes and the result is
placed into the command */
addr = addr << 9; /* addr = addr * 512 */
CMD[1] = ((addr & 0xFF000000) >> 24);
CMD[2] = ((addr & 0x00FF0000) >> 16);
CMD[3] = ((addr & 0x0000FF00) >> 8 );
spi_lock();
mmc_spi_cfg();
MMC_Enable();
/* Send command CMD24 to the MMC/SD-card (Write 1 Block/512 Bytes) */
tmp = Write_Command_MMC(CMD);
if (tmp != 0) {
MMC_Disable();
spi_unlock();
return(tmp);
}
/* Do a short delay and send a clock-pulse to the MMC/SD-card */
for (a = 0; a < 100; a++)
spi_read();
/* Send a start byte to the MMC/SD-card */
spi_write(0xFE);
/* Write the block (512 bytes) to the MMC/SD-card */
for (b = 0; b < 512; b++)
spi_write(*Buffer++);
/* write the CRC-Byte */
spi_write(0xFF); /* write a dummy CRC */
spi_write(0xFF); /* CRC code is not used */
/* Wait for MMC/SD-card busy */
while (spi_read() != 0xff) {};
/* set MMC_Chip_Select to high (MMC/SD-card inactive) */
MMC_Disable();
spi_unlock();
return (0);
}
/* #########################################################################
Routine to read the CSD register from the MMC/SD-card (16 bytes)
######################################################################### */
unsigned char mmc_read_csd (unsigned char *Buffer)
{
/* Command to read the CSD register */
unsigned char CMD[] = {0x49, 0x00, 0x00, 0x00, 0x00, 0xFF};
MMC_Read_Block(CMD, Buffer, 16);
return (0);
}
board/lpc2292sodimm/mmc_hw.h 已删除 100644 → 0
浏览文件 @ b0d8f5bf
/*
This module implements a linux character device driver for the 24c256 chip.
Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _MMC_HW_
#define _MMC_HW_
unsigned char mmc_read_csd(unsigned char *Buffer);
unsigned char mmc_read_sector (unsigned long addr,
unsigned char *Buffer);
unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer);
int mmc_hw_init(void);
#endif /* _MMC_HW_ */
board/lpc2292sodimm/spi.c 已删除 100644 → 0
浏览文件 @ b0d8f5bf
/*
This module implements an interface to the SPI on the lpc22xx.
Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <asm/errno.h>
#include <asm/arch/hardware.h>
#include "spi.h"
unsigned long spi_flags;
unsigned char spi_idle = 0x00;
int spi_init(void)
{
unsigned long pinsel0_value;
/* activate spi pins */
pinsel0_value = GET32(PINSEL0);
pinsel0_value &= ~(0xFFl << 8);
pinsel0_value |= (0x55l << 8);
PUT32(PINSEL0, pinsel0_value);
return 0;
}
board/lpc2292sodimm/spi.h 已删除 100644 → 0
浏览文件 @ b0d8f5bf
/*
This file defines the interface to the lpc22xx SPI module.
Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com)
This file may be included in software not adhering to the GPL.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef SPI_H
#define SPI_H
#include <config.h>
#include <common.h>
#include <asm/errno.h>
#include <asm/arch/hardware.h>
#define SPIF 0x80
#define spi_lock() disable_interrupts();
#define spi_unlock() enable_interrupts();
extern unsigned long spi_flags;
extern unsigned char spi_idle;
int spi_init(void);
static inline unsigned char spi_read(void)
{
unsigned char b;
PUT8(S0SPDR, spi_idle);
while (!(GET8(S0SPSR) & SPIF));
b = GET8(S0SPDR);
return b;
}
static inline void spi_write(unsigned char b)
{
PUT8(S0SPDR, b);
while (!(GET8(S0SPSR) & SPIF));
GET8(S0SPDR); /* this will clear the SPIF bit */
}
static inline void spi_set_clock(unsigned char clk_value)
{
PUT8(S0SPCCR, clk_value);
}
static inline void spi_set_cfg(unsigned char phase,
unsigned char polarity,
unsigned char lsbf)
{
unsigned char v = 0x20; /* master bit set */
if (phase)
v |= 0x08; /* set phase bit */
if (polarity) {
v |= 0x10; /* set polarity bit */
spi_idle = 0xFF;
} else {
spi_idle = 0x00;
}
if (lsbf)
v |= 0x40; /* set lsbf bit */
PUT8(S0SPCR, v);
}
#endif /* SPI_H */
include/asm-arm/arch-arm720t/lpc2292_registers.h 已删除 100644 → 0
浏览文件 @ b0d8f5bf
#ifndef __LPC2292_REGISTERS_H
#define __LPC2292_REGISTERS_H
#include <config.h>
/* Macros for reading/writing registers */
#define PUT8(reg, value) (*(volatile unsigned char*)(reg) = (value))
#define PUT16(reg, value) (*(volatile unsigned short*)(reg) = (value))
#define PUT32(reg, value) (*(volatile unsigned int*)(reg) = (value))
#define GET8(reg) (*(volatile unsigned char*)(reg))
#define GET16(reg) (*(volatile unsigned short*)(reg))
#define GET32(reg) (*(volatile unsigned int*)(reg))
/* External Memory Controller */
#define BCFG0 0xFFE00000 /* 32-bits */
#define BCFG1 0xFFE00004 /* 32-bits */
#define BCFG2 0xFFE00008 /* 32-bits */
#define BCFG3 0xFFE0000c /* 32-bits */
/* System Control Block */
#define EXTINT 0xE01FC140
#define EXTWAKE 0xE01FC144
#define EXTMODE 0xE01FC148
#define EXTPOLAR 0xE01FC14C
#define MEMMAP 0xE01FC040
#define PLLCON 0xE01FC080
#define PLLCFG 0xE01FC084
#define PLLSTAT 0xE01FC088
#define PLLFEED 0xE01FC08C
#define PCON 0xE01FC0C0
#define PCONP 0xE01FC0C4
#define VPBDIV 0xE01FC100
/* Memory Acceleration Module */
#define MAMCR 0xE01FC000
#define MAMTIM 0xE01FC004
/* Vectored Interrupt Controller */
#define VICIRQStatus 0xFFFFF000
#define VICFIQStatus 0xFFFFF004
#define VICRawIntr 0xFFFFF008
#define VICIntSelect 0xFFFFF00C
#define VICIntEnable 0xFFFFF010
#define VICIntEnClr 0xFFFFF014
#define VICSoftInt 0xFFFFF018
#define VICSoftIntClear 0xFFFFF01C
#define VICProtection 0xFFFFF020
#define VICVectAddr 0xFFFFF030
#define VICDefVectAddr 0xFFFFF034
#define VICVectAddr0 0xFFFFF100
#define VICVectAddr1 0xFFFFF104
#define VICVectAddr2 0xFFFFF108
#define VICVectAddr3 0xFFFFF10C
#define VICVectAddr4 0xFFFFF110
#define VICVectAddr5 0xFFFFF114
#define VICVectAddr6 0xFFFFF118
#define VICVectAddr7 0xFFFFF11C
#define VICVectAddr8 0xFFFFF120
#define VICVectAddr9 0xFFFFF124
#define VICVectAddr10 0xFFFFF128
#define VICVectAddr11 0xFFFFF12C
#define VICVectAddr12 0xFFFFF130
#define VICVectAddr13 0xFFFFF134
#define VICVectAddr14 0xFFFFF138
#define VICVectAddr15 0xFFFFF13C
#define VICVectCntl0 0xFFFFF200
#define VICVectCntl1 0xFFFFF204
#define VICVectCntl2 0xFFFFF208
#define VICVectCntl3 0xFFFFF20C
#define VICVectCntl4 0xFFFFF210
#define VICVectCntl5 0xFFFFF214
#define VICVectCntl6 0xFFFFF218
#define VICVectCntl7 0xFFFFF21C
#define VICVectCntl8 0xFFFFF220
#define VICVectCntl9 0xFFFFF224
#define VICVectCntl10 0xFFFFF228
#define VICVectCntl11 0xFFFFF22C
#define VICVectCntl12 0xFFFFF230
#define VICVectCntl13 0xFFFFF234
#define VICVectCntl14 0xFFFFF238
#define VICVectCntl15 0xFFFFF23C
/* Pin connect block */
#define PINSEL0 0xE002C000 /* 32 bits */
#define PINSEL1 0xE002C004 /* 32 bits */
#define PINSEL2 0xE002C014 /* 32 bits */
/* GPIO */
#define IO0PIN 0xE0028000
#define IO0SET 0xE0028004
#define IO0DIR 0xE0028008
#define IO0CLR 0xE002800C
#define IO1PIN 0xE0028010
#define IO1SET 0xE0028014
#define IO1DIR 0xE0028018
#define IO1CLR 0xE002801C
#define IO2PIN 0xE0028020
#define IO2SET 0xE0028024
#define IO2DIR 0xE0028028
#define IO2CLR 0xE002802C
#define IO3PIN 0xE0028030
#define IO3SET 0xE0028034
#define IO3DIR 0xE0028038
#define IO3CLR 0xE002803C
/* Uarts */
#define U0RBR 0xE000C000
#define U0THR 0xE000C000
#define U0IER 0xE000C004
#define U0IIR 0xE000C008
#define U0FCR 0xE000C008
#define U0LCR 0xE000C00C
#define U0LSR 0xE000C014
#define U0SCR 0xE000C01C
#define U0DLL 0xE000C000
#define U0DLM 0xE000C004
#define U1RBR 0xE0010000
#define U1THR 0xE0010000
#define U1IER 0xE0010004
#define U1IIR 0xE0010008
#define U1FCR 0xE0010008
#define U1LCR 0xE001000C
#define U1MCR 0xE0010010
#define U1LSR 0xE0010014
#define U1MSR 0xE0010018
#define U1SCR 0xE001001C
#define U1DLL 0xE0010000
#define U1DLM 0xE0010004
/* I2C */
#define I2CONSET 0xE001C000
#define I2STAT 0xE001C004
#define I2DAT 0xE001C008
#define I2ADR 0xE001C00C
#define I2SCLH 0xE001C010
#define I2SCLL 0xE001C014
#define I2CONCLR 0xE001C018
/* SPI */
#define S0SPCR 0xE0020000
#define S0SPSR 0xE0020004
#define S0SPDR 0xE0020008
#define S0SPCCR 0xE002000C
#define S0SPINT 0xE002001C
#define S1SPCR 0xE0030000
#define S1SPSR 0xE0030004
#define S1SPDR 0xE0030008
#define S1SPCCR 0xE003000C
#define S1SPINT 0xE003001C
/* CAN controller */
/* skip for now */
/* Timers */
#define T0IR 0xE0004000
#define T0TCR 0xE0004004
#define T0TC 0xE0004008
#define T0PR 0xE000400C
#define T0PC 0xE0004010
#define T0MCR 0xE0004014
#define T0MR0 0xE0004018
#define T0MR1 0xE000401C
#define T0MR2 0xE0004020
#define T0MR3 0xE0004024
#define T0CCR 0xE0004028
#define T0CR0 0xE000402C
#define T0CR1 0xE0004030
#define T0CR2 0xE0004034
#define T0CR3 0xE0004038
#define T0EMR 0xE000403C
#define T1IR 0xE0008000
#define T1TCR 0xE0008004
#define T1TC 0xE0008008
#define T1PR 0xE000800C
#define T1PC 0xE0008010
#define T1MCR 0xE0008014
#define T1MR0 0xE0008018
#define T1MR1 0xE000801C
#define T1MR2 0xE0008020
#define T1MR3 0xE0008024
#define T1CCR 0xE0008028
#define T1CR0 0xE000802C
#define T1CR1 0xE0008030
#define T1CR2 0xE0008034
#define T1CR3 0xE0008038
#define T1EMR 0xE000803C
/* PWM */
/* skip for now */
/* A/D converter */
/* skip for now */
/* Real Time Clock */
/* skip for now */
/* Watchdog */
#define WDMOD 0xE0000000
#define WDTC 0xE0000004
#define WDFEED 0xE0000008
#define WDTV 0xE000000C
/* EmbeddedICE LOGIC */
/* skip for now */
#endif
include/asm-arm/arch-arm720t/mmc.h 已删除 100644 → 0
浏览文件 @ b0d8f5bf
/*
* A dummy header file for use with the LPC2292 port to keep the
* compiler happy.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _MMC_ARM_TDM_H_
#define _MMC_ARM_TDM_H_
#endif /* _MMC_ARM_TDM_H_ */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或