am335x: Enable DDR PHY dynamic power down bit for DDR3 boards

Enable DDR PHY dynamic power down bit, which enables
powering down the IO receiver when not performing read.

This also helps in reducing overall power consumption in
low power states (suspend/standby).
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NSatyanarayana, Sandhya <sandhya.satyanarayana@ti.com>
Cc: Tom Rini <trini@ti.com>
Reviewed-by: NTom Rini <trini@ti.com>

arch/arm/include/asm/arch-am33xx/ddr_defs.h

@@ -28,6 +28,7 @@
 #define VTP_CTRL_START_EN	(0x1)
 #define PHY_DLL_LOCK_DIFF	0x0
 #define DDR_CKE_CTRL_NORMAL	0x1
+#define PHY_EN_DYN_PWRDN	(0x1 << 20)
 
 /* Micron MT47H128M16RT-25E */
 #define MT47H128M16RT25E_EMIF_READ_LATENCY	0x100005

board/ti/am335x/board.c

@@ -251,7 +251,8 @@ static struct emif_regs ddr3_emif_reg_data = {
 	.sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
 	.sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
 	.zq_config = MT41J128MJT125_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY,
+	.emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY |
+				PHY_EN_DYN_PWRDN,
 };
 
 static struct emif_regs ddr3_evm_emif_reg_data = {
@@ -261,7 +262,8 @@ static struct emif_regs ddr3_evm_emif_reg_data = {
 	.sdram_tim2 = MT41J512M8RH125_EMIF_TIM2,
 	.sdram_tim3 = MT41J512M8RH125_EMIF_TIM3,
 	.zq_config = MT41J512M8RH125_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY,
+	.emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY |
+				PHY_EN_DYN_PWRDN,
 };
 #endif