Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 54387ac9 编写于 作者: W wdenk
浏览文件
操作

* Patch by Yuli Barcohen, 25 Sep 2003: 

  add support for Zephyr Engineering ZPC.1900 board

* Patch by Anders Larsen, 23 Sep 2003:
  add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
  implemented for the x86 architecture)
上级 fc3e2165
展开全部 隐藏空白更改
内联 并排
Showing with 1631 addition and 6 deletion
CHANGELOG
浏览文件 @ 54387ac9
...@@ -2,6 +2,13 @@ ...@@ -2,6 +2,13 @@
Changes for U-Boot 1.0.0: Changes for U-Boot 1.0.0:
====================================================================== ======================================================================
* Patch by Yuli Barcohen, 25 Sep 2003:
add support for Zephyr Engineering ZPC.1900 board
* Patch by Anders Larsen, 23 Sep 2003:
add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
implemented for the x86 architecture)
* Patch by Sangmoon Kim, 23 Sep 2003: * Patch by Sangmoon Kim, 23 Sep 2003:
fix pll_pci_to_mem_multiplier table for MPC8245 fix pll_pci_to_mem_multiplier table for MPC8245
......
MAKEALL
浏览文件 @ 54387ac9
...@@ -82,7 +82,7 @@ LIST_8260=" \ ...@@ -82,7 +82,7 @@ LIST_8260=" \
gw8260 hymod IPHASE4539 MPC8260ADS \ gw8260 hymod IPHASE4539 MPC8260ADS \
MPC8266ADS PM826 ppmc8260 RPXsuper \ MPC8266ADS PM826 ppmc8260 RPXsuper \
rsdproto sacsng sbc8260 SCM \ rsdproto sacsng sbc8260 SCM \
TQM8260_AC TQM8260_AD TQM8260_AE \ TQM8260_AC TQM8260_AD TQM8260_AE ZPC1900 \
" "
######################################################################### #########################################################################
......
Makefile
浏览文件 @ 54387ac9
...@@ -642,6 +642,9 @@ utx8245_config: unconfig ...@@ -642,6 +642,9 @@ utx8245_config: unconfig
## MPC8260 Systems ## MPC8260 Systems
######################################################################### #########################################################################
atc_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 atc
cogent_mpc8260_config: unconfig cogent_mpc8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 cogent @./mkconfig $(@:_config=) ppc mpc8260 cogent
...@@ -765,8 +768,8 @@ TQM8265_AA_config: unconfig ...@@ -765,8 +768,8 @@ TQM8265_AA_config: unconfig
fi fi
@./mkconfig -a TQM8260 ppc mpc8260 tqm8260 @./mkconfig -a TQM8260 ppc mpc8260 tqm8260
atc_config: unconfig ZPC1900_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 atc @./mkconfig $(@:_config=) ppc mpc8260 zpc1900
######################################################################### #########################################################################
## 74xx/7xx Systems ## 74xx/7xx Systems
......
README
浏览文件 @ 54387ac9
...@@ -239,6 +239,7 @@ Directory Hierarchy: ...@@ -239,6 +239,7 @@ Directory Hierarchy:
- board/westel/ Files specific to boards manufactured by Westel Wireless - board/westel/ Files specific to boards manufactured by Westel Wireless
- board/westel/amx860 Files specific to AMX860 boards - board/westel/amx860 Files specific to AMX860 boards
- board/utx8245 Files specific to UTX8245 boards - board/utx8245 Files specific to UTX8245 boards
- board/zpc1900 Files specific to Zephyr Engineering ZPC.1900 board
Software Configuration: Software Configuration:
======================= =======================
...@@ -355,7 +356,7 @@ The following options need to be configured: ...@@ -355,7 +356,7 @@ The following options need to be configured:
CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260, CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260,
CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L, CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L,
CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI, CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI,
CONFIG_NETVIA, CONFIG_RBC823 CONFIG_NETVIA, CONFIG_RBC823, CONFIG_ZPC1900
ARM based boards: ARM based boards:
----------------- -----------------
...@@ -393,7 +394,7 @@ The following options need to be configured: ...@@ -393,7 +394,7 @@ The following options need to be configured:
Possible values are: Possible values are:
CFG_8260ADS - original MPC8260ADS CFG_8260ADS - original MPC8260ADS
CFG_8266ADS - MPC8266ADS (untested) CFG_8266ADS - MPC8266ADS (untested)
CFG_PQ2FADS - PQ2FADS-ZU CFG_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR
- MPC824X Family Member (if CONFIG_MPC824X is defined) - MPC824X Family Member (if CONFIG_MPC824X is defined)
...@@ -1943,7 +1944,8 @@ configurations; the following names are supported: ...@@ -1943,7 +1944,8 @@ configurations; the following names are supported:
GEN860T_config EBONY_config FPS860L_config GEN860T_config EBONY_config FPS860L_config
ELPT860_config cmi_mpc5xx_config NETVIA_config ELPT860_config cmi_mpc5xx_config NETVIA_config
at91rm9200dk_config omap1510inn_config MPC8260ADS_config at91rm9200dk_config omap1510inn_config MPC8260ADS_config
omap1610inn_config omap1610inn_config ZPC1900_config
Note: for some board special configuration names may exist; check if Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for additional information is available from the board vendor; for
instance, the TQM8xxL systems run normally at 50 MHz and use a instance, the TQM8xxL systems run normally at 50 MHz and use a
......
board/zpc1900/Makefile 0 → 100644
浏览文件 @ 54387ac9
#
# (C) Copyright 2001
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := $(BOARD).o flash.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-include .depend
#########################################################################
board/zpc1900/config.mk 0 → 100644
浏览文件 @ 54387ac9
#
# (C) Copyright 2001
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# Modified by, Yuli Barcohen, Arabella Software Ltd. <yuli@arabellasw.com>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# ZPC.1900 board
#
TEXT_BASE = 0xFFF00000
#TEXT_BASE = 0x03000000
board/zpc1900/flash.c 0 → 100644
浏览文件 @ 54387ac9
此差异已折叠。
board/zpc1900/u-boot.lds 0 → 100644
浏览文件 @ 54387ac9
/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Modified by Yuli Barcohen <yuli@arabellasw.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_ARCH(powerpc)
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
.plt : { *(.plt) }
.text :
{
cpu/mpc8260/start.o (.text)
*(.text)
*(.fixup)
*(.got1)
. = ALIGN(16);
*(.rodata)
*(.rodata1)
*(.rodata.str1.4)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
*(.got)
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
*(.data)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
}
_edata = .;
PROVIDE (edata = .);
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(4096);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(4096);
__init_end = .;
__bss_start = .;
.bss :
{
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
}
_end = . ;
PROVIDE (end = .);
}
ENTRY(_start)
board/zpc1900/zpc1900.c 0 → 100644
浏览文件 @ 54387ac9
/*
* (C) Copyright 2001-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2003 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
#include <asm/m8260_pci.h>
#include <i2c.h>
#include <spd.h>
#include <miiphy.h>
/*
* I/O Port configuration table
*
* if conf is 1, then that port pin will be configured at boot time
* according to the five values podr/pdir/ppar/psor/pdat for that entry
*/
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
/* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
/* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
/* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
/* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
/* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
/* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
/* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
/* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
/* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
/* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
/* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
/* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
/* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
/* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
/* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
/* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
/* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
/* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
/* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
/* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
/* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
/* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* SMC2 TXD */
/* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* SMC2 RXD */
/* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */
/* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */
/* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */
/* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */
/* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */
/* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */
/* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */
/* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */
},
/* Port B */
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
/* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
/* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
/* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
/* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
/* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
/* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
/* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
/* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
/* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
/* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
/* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
/* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
/* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
/* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
/* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
/* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
/* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
/* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */
/* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
/* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
/* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
/* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
/* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
/* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
/* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
/* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
/* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
},
/* Port C */
{ /* conf ppar psor pdir podr pdat */
/* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
/* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */
/* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN CLSN */
/* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
/* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */
/* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
/* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */
/* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
/* PC23 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
/* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
/* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC21 */
/* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */
/* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK13) */
/* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK14) */
/* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */
/* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */
/* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */
/* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RENA */
/* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */
/* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */
/* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */
/* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* LXT972 MDC */
/* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* LXT972 MDIO */
/* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */
/* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */
/* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */
/* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */
/* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */
/* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */
/* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */
/* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */
/* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */
},
/* Port D */
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
/* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
/* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
/* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */
/* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */
/* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */
/* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */
/* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */
/* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */
/* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */
/* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */
/* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */
/* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */
/* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */
/* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
/* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
/* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
/* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
/* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
/* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
/* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */
/* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */
/* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */
/* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
}
};
#ifdef CFG_NVRAM_ACCESS_ROUTINE
void *nvram_read(void *dest, long src, size_t count)
{
return memcpy(dest, (const void *)src, count);
}
void nvram_write(long dest, const void *src, size_t count)
{
vu_char *p1 = (vu_char *)(CFG_EEPROM + 0x1555);
vu_char *p2 = (vu_char *)(CFG_EEPROM + 0x0AAA);
vu_char *d = (vu_char *)dest;
const uchar *s = (const uchar *)src;
/* Unprotect the EEPROM */
*p1 = 0xAA;
*p2 = 0x55;
*p1 = 0x80;
*p1 = 0xAA;
*p2 = 0x55;
*p1 = 0x20;
udelay(10000);
/* Write the data to the EEPROM */
while (count--) {
*d++ = *s++;
while (*(d - 1) != *(s - 1))
/* wait */;
}
/* Protect the EEPROM */
*p1 = 0xAA;
*p2 = 0x55;
*p1 = 0xA0;
udelay(10000);
}
#endif /* CFG_NVRAM_ACCESS_ROUTINE */
long int initdram(int board_type)
{
vu_char *bcsr = (vu_char *)CFG_BCSR;
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
vu_char *ramaddr;
uchar c = 0xFF;
long int msize = CFG_SDRAM_SIZE;
uint psdmr = CFG_PSDMR;
int i;
if (bcsr[4] & BCSR_PCI_MODE) { /* PCI mode selected by JP9 */
immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
immap->im_siu_conf.sc_siumcr =
(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
| SIUMCR_LBPC01;
}
#ifndef CFG_RAMBOOT
immap->im_siu_conf.sc_ppc_acr = 0x03;
immap->im_siu_conf.sc_ppc_alrh = 0x30126745;
immap->im_siu_conf.sc_tescr1 = 0x00004000;
memctl->memc_mptpr = CFG_MPTPR;
#ifdef CFG_LSDRAM_BASE
/*
Initialise local bus SDRAM only if the pins
are configured as local bus pins and not as PCI.
*/
if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) {
memctl->memc_lsrt = CFG_LSRT;
memctl->memc_or4 = 0xFFC01480;
memctl->memc_br4 = CFG_LSDRAM_BASE | 0x00001861;
memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_PREA;
ramaddr = (vu_char *)CFG_LSDRAM_BASE;
*ramaddr = c;
memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_CBRR;
for (i = 0; i < 8; i++)
*ramaddr = c;
memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_MRW;
*ramaddr = c;
memctl->memc_lsdmr = CFG_LSDMR | PSDMR_RFEN;
}
#endif /* CFG_LSDRAM_BASE */
/* Initialise 60x bus SDRAM */
memctl->memc_psrt = CFG_PSRT;
memctl->memc_or2 = 0xFC0028C0;
memctl->memc_br2 = CFG_SDRAM_BASE | 0x00000041;
/*
* The mode data for Mode Register Write command must appear on
* the address lines during a mode-set cycle. It is driven by
* the memory controller, in single PowerQUICC II mode,
* according to PSDMR[CL] and PSDMR[BL] fields. In
* 60x-compatible mode, software must drive the correct value on
* the address lines. BL=0 because for 64-bit port size burst
* length must be 4.
*/
ramaddr = (vu_char *)(CFG_SDRAM_BASE |
((psdmr & PSDMR_CL_MSK) << 7) | 0x10);
memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */
*ramaddr = c;
memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
for (i = 0; i < 8; i++)
*ramaddr = c;
memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; /* Mode Register write */
*ramaddr = c;
memctl->memc_psdmr = psdmr | PSDMR_RFEN; /* Refresh enable */
*ramaddr = c;
#endif /* CFG_RAMBOOT */
/* Return total 60x bus SDRAM size */
return msize * 1024 * 1024;
}
int checkboard(void)
{
vu_char *bcsr = (vu_char *)CFG_BCSR;
printf("Board: Zephyr ZPC.1900 Rev. %c\n", bcsr[2] + 0x40);
return 0;
}
cpu/mpc8260/cpu.c
浏览文件 @ 54387ac9
...@@ -119,6 +119,9 @@ int checkcpu (void) ...@@ -119,6 +119,9 @@ int checkcpu (void)
case 0x0062: case 0x0062:
printf ("B.1 4K25A"); printf ("B.1 4K25A");
break; break;
case 0x0064:
printf ("C.0 5K25A");
break;
case 0x0A00: case 0x0A00:
printf ("0.0 0K49M"); printf ("0.0 0K49M");
break; break;
......
include/cmd_confdefs.h
浏览文件 @ 54387ac9
...@@ -120,6 +120,7 @@ ...@@ -120,6 +120,7 @@
CFG_CMD_PCI | \ CFG_CMD_PCI | \
CFG_CMD_PCMCIA | \ CFG_CMD_PCMCIA | \
CFG_CMD_PING | \ CFG_CMD_PING | \
CFG_CMD_PORTIO | \
CFG_CMD_REGINFO | \ CFG_CMD_REGINFO | \
CFG_CMD_SAVES | \ CFG_CMD_SAVES | \
CFG_CMD_SCSI | \ CFG_CMD_SCSI | \
......
include/configs/ZPC1900.h 0 → 100644
浏览文件 @ 54387ac9
/*
* Copyright (C) 2003 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
*
* U-Boot configuration for Zephyr Engineering ZPC.1900 board.
* This port was developed and tested on Revision C board.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_ZPC1900 1 /* ...on Zephyr ZPC.1900 board */
#define CPU_ID_STR "MPC8265"
#undef DEBUG
#undef CONFIG_BOARD_PRE_INIT /* Don't call board_pre_init */
/* Allow serial number (serial) and MAC address (ethaddr) to be overwritten */
#define CONFIG_ENV_OVERWRITE
/*
* Select serial console configuration
*
* If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
* for SCC).
*/
#define CONFIG_CONS_ON_SMC /* Console is on SMC */
#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
#undef CONFIG_CONS_NONE /* It's not on external UART */
#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */
/*
* Select ethernet configuration
*
* If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
* then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
* SCC, 1-3 for FCC)
*
* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
* must be defined elsewhere (as for the console), or CFG_CMD_NET must
* be removed from CONFIG_COMMANDS to remove support for networking.
*/
#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
#undef CONFIG_ETHER_NONE /* No external Ethernet */
#ifdef CONFIG_ETHER_ON_FCC
#define CONFIG_ETHER_INDEX 2 /* FCC2 is used for Ethernet */
#if (CONFIG_ETHER_INDEX == 2)
/*
* - Rx clock is CLK13
* - Tx clock is CLK14
* - Select bus for bd/buffers (see 28-13)
* - Full duplex
*/
# define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
# define CFG_CPMFCR_RAMTYPE 0
# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
#endif /* CONFIG_ETHER_INDEX */
#define CONFIG_MII /* MII PHY management */
#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */
/*
* GPIO pins used for bit-banged MII communications
*/
#define MDIO_PORT 2 /* Port C */
#define MDIO_ACTIVE (iop->pdir |= 0x00400000)
#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
else iop->pdat &= ~0x00400000
#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
else iop->pdat &= ~0x00200000
#define MIIDELAY udelay(1)
#endif /* CONFIG_ETHER_ON_FCC */
#ifndef CONFIG_8260_CLKIN
#define CONFIG_8260_CLKIN 66666666 /* in Hz */
#endif
#define CONFIG_BAUDRATE 9600
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
CFG_CMD_BEDBUG | \
CFG_CMD_BMP | \
CFG_CMD_BSP | \
CFG_CMD_DATE | \
CFG_CMD_DOC | \
CFG_CMD_DTT | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
CFG_CMD_FAT | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
CFG_CMD_HWFLOW | \
CFG_CMD_I2C | \
CFG_CMD_IDE | \
CFG_CMD_JFFS2 | \
CFG_CMD_KGDB | \
CFG_CMD_MMC | \
CFG_CMD_NAND | \
CFG_CMD_PCI | \
CFG_CMD_PCMCIA | \
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
CFG_CMD_USB | \
CFG_CMD_VFD ) )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "dhcp;bootm" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=:::::eth0:dhcp"
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
#endif
#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
/*
* Miscellaneous configurable options
*/
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CFG_FLASH_BASE 0xFFE00000
#define CFG_FLASH_CFI
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */
#define CFG_DEFAULT_IMMR 0x0F010000
#define CFG_IMMR 0xF0000000
#define CFG_SDRAM_BASE 0x00000000
#define CFG_SDRAM_SIZE 64
#define CFG_FLSIMM_BASE 0xFC000000
#define CFG_LSDRAM_BASE 0xFE000000
#define CFG_BCSR 0xFEA00000
#define CFG_EEPROM 0xFEB00000
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
#define BCSR_PCI_MODE 0x01
#define CFG_INIT_RAM_ADDR CFG_IMMR
#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/* Hard reset configuration word */
#define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01 |\
HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB010 |\
HRCW_APPC10 |\
HRCW_MODCK_H0101 \
) /* 0x14820205 */
/* No slaves */
#define CFG_HRCW_SLAVE1 0
#define CFG_HRCW_SLAVE2 0
#define CFG_HRCW_SLAVE3 0
#define CFG_HRCW_SLAVE4 0
#define CFG_HRCW_SLAVE5 0
#define CFG_HRCW_SLAVE6 0
#define CFG_HRCW_SLAVE7 0
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
#endif
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#if !defined(CFG_ENV_IS_IN_FLASH) && !defined(CFG_ENV_IS_IN_NVRAM)
#define CFG_ENV_IS_IN_NVRAM 1
#endif
#ifdef CFG_ENV_IS_IN_FLASH
# define CFG_ENV_SECT_SIZE 0x10000
# define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE)
#else
# define CFG_ENV_ADDR (CFG_EEPROM + 0x400)
# define CFG_ENV_SIZE 0x200
# define CFG_NVRAM_ACCESS_ROUTINE
#endif
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
#define CFG_HID0_INIT 0
#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE )
#define CFG_HID2 0
#define CFG_SIUMCR 0x42200000
#define CFG_SYPCR 0xFFFFFFC3
#define CFG_BCR 0x90400000
#define CFG_SCCR SCCR_DFBRG01
#define CFG_RMR RMR_CSRE
#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
#define CFG_RCCR 0
#define CFG_PSDMR 0x014EB45A
#define CFG_PSRT 0x0C
#define CFG_LSDMR 0x008AB552
#define CFG_LSRT 0x0E
#define CFG_MPTPR 0x4000
#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00000801
#define CFG_OR0_PRELIM 0xFFE00856
#define CFG_BR5_PRELIM CFG_EEPROM | 0x00000801
#define CFG_OR5_PRELIM 0xFFFF03F6
#define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00000801
#define CFG_OR6_PRELIM 0xFE000856
#define CFG_BR7_PRELIM CFG_BCSR | 0x00000801
#define CFG_OR7_PRELIM 0xFFFF83F6
#define CFG_RESET_ADDRESS 0xC0000000
#endif /* __CONFIG_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或