xilinx: fru: Replace spaces with \0 in detected name

FRU spec expected \0 for unused symbols but unfortunately a lot of boards
are using spaces instead of \0. That's why after saving it to desc->name
name is checked again and all spaces are converted to \0. This will ensure
that names can be used for string manipulations like concatenation.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

board/xilinx/common/board.c

@@ -168,7 +168,7 @@ static bool xilinx_detect_legacy(u8 *buffer)
 static int xilinx_read_eeprom_fru(struct udevice *dev, char *name,
 				  struct xilinx_board_description *desc)
 {
-	int ret, eeprom_size;
+	int i, ret, eeprom_size;
 	u8 *fru_content;
 
 	/* FIXME this is shortcut - if eeprom type is wrong it will fail */
@@ -207,6 +207,10 @@ static int xilinx_read_eeprom_fru(struct udevice *dev, char *name,
 		sizeof(desc->manufacturer));
 	strncpy(desc->name, (char *)fru_data.brd.product_name,
 		sizeof(desc->name));
+	for (i = 0; i < sizeof(desc->name); i++) {
+		if (desc->name[i] == ' ')
+			desc->name[i] = '\0';
+	}
 	strncpy(desc->revision, (char *)fru_data.brd.rev,
 		sizeof(desc->revision));
 	strncpy(desc->serial, (char *)fru_data.brd.serial_number,