Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 51f866e8 编写于 作者: T Tom Rini
浏览文件
操作

Merge git://git.denx.de/u-boot-dm

上级 3fea9536 ad46af0e
隐藏空白更改
内联 并排
Showing with 778 addition and 439 deletion
arch/arm/mach-omap2/Makefile
浏览文件 @ 51f866e8
......@@ -29,9 +29,11 @@ obj-y += abb.o
endif
ifneq ($(CONFIG_OMAP54XX),)
ifeq ($(CONFIG_DM_SCSI),)
obj-y += pipe3-phy.o
obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o
endif
endif
ifeq ($(CONFIG_SYS_DCACHE_OFF),)
obj-y += omap-cache.o
......
arch/arm/mach-omap2/omap5/hw_data.c
浏览文件 @ 51f866e8
......@@ -361,6 +361,9 @@ void enable_basic_clocks(void)
(*prcm)->cm_l4per_gpio6_clkctrl,
(*prcm)->cm_l4per_gpio7_clkctrl,
(*prcm)->cm_l4per_gpio8_clkctrl,
#ifdef CONFIG_SCSI_AHCI_PLAT
(*prcm)->cm_l3init_ocp2scp3_clkctrl,
#endif
0
};
......@@ -378,6 +381,9 @@ void enable_basic_clocks(void)
#ifdef CONFIG_TI_QSPI
(*prcm)->cm_l4per_qspi_clkctrl,
#endif
#ifdef CONFIG_SCSI_AHCI_PLAT
(*prcm)->cm_l3init_sata_clkctrl,
#endif
0
};
......@@ -411,6 +417,12 @@ void enable_basic_clocks(void)
setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
#endif
#ifdef CONFIG_SCSI_AHCI_PLAT
/* Enable optional functional clock for SATA */
setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
SATA_CLKCTRL_OPTFCLKEN_MASK);
#endif
/* Enable SCRM OPT clocks for PER and CORE dpll */
setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
OPTFCLKEN_SCRM_PER_MASK);
......
arch/arm/mach-omap2/sata.c
浏览文件 @ 51f866e8
......@@ -37,29 +37,6 @@ int init_sata(int dev)
int ret;
u32 val;
u32 const clk_domains_sata[] = {
0
};
u32 const clk_modules_hw_auto_sata[] = {
(*prcm)->cm_l3init_ocp2scp3_clkctrl,
0
};
u32 const clk_modules_explicit_en_sata[] = {
(*prcm)->cm_l3init_sata_clkctrl,
0
};
do_enable_clocks(clk_domains_sata,
clk_modules_hw_auto_sata,
clk_modules_explicit_en_sata,
0);
/* Enable optional functional clock for SATA */
setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
SATA_CLKCTRL_OPTFCLKEN_MASK);
sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata;
/* Power up the PHY */
......
arch/sandbox/dts/sandbox.dts
浏览文件 @ 51f866e8
......@@ -123,6 +123,20 @@
yres = <768>;
};
leds {
compatible = "gpio-leds";
iracibble {
gpios = <&gpio_a 1 0>;
label = "sandbox:red";
};
martinet {
gpios = <&gpio_a 2 0>;
label = "sandbox:green";
};
};
pci: pci-controller {
compatible = "sandbox,pci";
device_type = "pci";
......
board/atmel/sama5d3_xplained/sama5d3_xplained.c
浏览文件 @ 51f866e8
......@@ -6,16 +6,13 @@
*/
#include <common.h>
#include <mmc.h>
#include <asm/io.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <atmel_mci.h>
#include <net.h>
#include <netdev.h>
#include <debug_uart.h>
#include <spl.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/at91_wdt.h>
......@@ -65,24 +62,26 @@ static void sama5d3_xplained_usb_hw_init(void)
#ifdef CONFIG_GENERIC_ATMEL_MCI
static void sama5d3_xplained_mci0_hw_init(void)
{
at91_mci_hw_init();
at91_set_pio_output(AT91_PIO_PORTE, 2, 0); /* MCI0 Power */
}
#endif
int board_early_init_f(void)
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
at91_periph_clk_enable(ATMEL_ID_PIOA);
at91_periph_clk_enable(ATMEL_ID_PIOB);
at91_periph_clk_enable(ATMEL_ID_PIOC);
at91_periph_clk_enable(ATMEL_ID_PIOD);
at91_periph_clk_enable(ATMEL_ID_PIOE);
at91_seriald_hw_init();
}
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
#ifdef CONFIG_DEBUG_UART
debug_uart_init();
#endif
return 0;
}
#endif
int board_init(void)
{
......@@ -97,10 +96,6 @@ int board_init(void)
#endif
#ifdef CONFIG_GENERIC_ATMEL_MCI
sama5d3_xplained_mci0_hw_init();
#endif
#ifdef CONFIG_MACB
at91_gmac_hw_init();
at91_macb_hw_init();
#endif
return 0;
}
......@@ -113,30 +108,14 @@ int dram_init(void)
return 0;
}
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_MACB
macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00);
macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
#endif
return 0;
}
#ifdef CONFIG_GENERIC_ATMEL_MCI
int board_mmc_init(bd_t *bis)
{
atmel_mci_init((void *)ATMEL_BASE_MCI0);
return 0;
}
#endif
/* SPL */
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
#ifdef CONFIG_SYS_USE_MMC
#ifdef CONFIG_GENERIC_ATMEL_MCI
sama5d3_xplained_mci0_hw_init();
#endif
#elif CONFIG_SYS_USE_NANDFLASH
sama5d3_xplained_nand_hw_init();
#endif
......
board/atmel/sama5d3xek/sama5d3xek.c
浏览文件 @ 51f866e8
......@@ -6,29 +6,22 @@
*/
#include <common.h>
#include <mmc.h>
#include <asm/io.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <debug_uart.h>
#include <lcd.h>
#include <linux/ctype.h>
#include <atmel_hlcdc.h>
#include <atmel_mci.h>
#include <phy.h>
#include <micrel.h>
#include <net.h>
#include <netdev.h>
#include <spl.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/at91_wdt.h>
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
#include <asm/arch/atmel_usba_udc.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
/* ------------------------------------------------------------------------- */
......@@ -135,8 +128,6 @@ static void sama5d3xek_usb_hw_init(void)
#ifdef CONFIG_GENERIC_ATMEL_MCI
static void sama5d3xek_mci_hw_init(void)
{
at91_mci_hw_init();
at91_set_pio_output(AT91_PIO_PORTB, 10, 0); /* MCI0 Power */
}
#endif
......@@ -215,18 +206,22 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD_INFO */
#endif /* CONFIG_LCD */
int board_early_init_f(void)
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
at91_periph_clk_enable(ATMEL_ID_PIOA);
at91_periph_clk_enable(ATMEL_ID_PIOB);
at91_periph_clk_enable(ATMEL_ID_PIOC);
at91_periph_clk_enable(ATMEL_ID_PIOD);
at91_periph_clk_enable(ATMEL_ID_PIOE);
at91_seriald_hw_init();
}
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
#ifdef CONFIG_DEBUG_UART
debug_uart_init();
#endif
return 0;
}
#endif
int board_init(void)
{
......@@ -242,21 +237,9 @@ int board_init(void)
#ifdef CONFIG_CMD_USB
sama5d3xek_usb_hw_init();
#endif
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
at91_udp_hw_init();
#endif
#ifdef CONFIG_GENERIC_ATMEL_MCI
sama5d3xek_mci_hw_init();
#endif
#ifdef CONFIG_ATMEL_SPI
at91_spi0_hw_init(1 << 0);
#endif
#ifdef CONFIG_MACB
if (has_emac())
at91_macb_hw_init();
if (has_gmac())
at91_gmac_hw_init();
#endif
#ifdef CONFIG_LCD
if (has_lcdc())
sama5d3xek_lcd_hw_init();
......@@ -271,104 +254,6 @@ int dram_init(void)
return 0;
}
int board_phy_config(struct phy_device *phydev)
{
/* board specific timings for GMAC */
if (has_gmac()) {
/* rx data delay */
ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
0x2222);
/* tx data delay */
ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
0x2222);
/* rx/tx clock delay */
ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
0xf2f4);
}
/* always run the PHY's config routine */
if (phydev->drv->config)
return phydev->drv->config(phydev);
return 0;
}
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
if (has_emac())
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
if (has_gmac())
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00);
#endif
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
usba_udc_probe(&pdata);
#ifdef CONFIG_USB_ETH_RNDIS
usb_eth_initialize(bis);
#endif
#endif
return rc;
}
#ifdef CONFIG_GENERIC_ATMEL_MCI
int board_mmc_init(bd_t *bis)
{
int rc = 0;
rc = atmel_mci_init((void *)ATMEL_BASE_MCI0);
return rc;
}
#endif
/* SPI chip select control */
#ifdef CONFIG_ATMEL_SPI
#include <spi.h>
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs < 4;
}
void spi_cs_activate(struct spi_slave *slave)
{
switch (slave->cs) {
case 0:
at91_set_pio_output(AT91_PIO_PORTD, 13, 0);
case 1:
at91_set_pio_output(AT91_PIO_PORTD, 14, 0);
case 2:
at91_set_pio_output(AT91_PIO_PORTD, 15, 0);
case 3:
at91_set_pio_output(AT91_PIO_PORTD, 16, 0);
default:
break;
}
}
void spi_cs_deactivate(struct spi_slave *slave)
{
switch (slave->cs) {
case 0:
at91_set_pio_output(AT91_PIO_PORTD, 13, 1);
case 1:
at91_set_pio_output(AT91_PIO_PORTD, 14, 1);
case 2:
at91_set_pio_output(AT91_PIO_PORTD, 15, 1);
case 3:
at91_set_pio_output(AT91_PIO_PORTD, 16, 1);
default:
break;
}
}
#endif /* CONFIG_ATMEL_SPI */
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
......@@ -392,12 +277,8 @@ int board_late_init(void)
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
#ifdef CONFIG_SYS_USE_MMC
sama5d3xek_mci_hw_init();
#elif CONFIG_SYS_USE_NANDFLASH
#if CONFIG_SYS_USE_NANDFLASH
sama5d3xek_nand_hw_init();
#elif CONFIG_SYS_USE_SERIALFLASH
at91_spi0_hw_init(1 << 0);
#endif
}
......
cmd/Kconfig
浏览文件 @ 51f866e8
......@@ -667,6 +667,15 @@ config CMD_CACHE
help
Enable the "icache" and "dcache" commands
config CMD_LED
bool "led"
default y if LED
help
Enable the 'led' command which allows for control of LEDs supported
by the board. The LEDs can be listed with 'led list' and controlled
with led on/off/togle/blink. Any LED drivers can be controlled with
this command, e.g. led_gpio.
config CMD_TIME
bool "time"
help
......
cmd/Makefile
浏览文件 @ 51f866e8
......@@ -78,7 +78,8 @@ obj-$(CONFIG_CMD_ITEST) += itest.o
obj-$(CONFIG_CMD_JFFS2) += jffs2.o
obj-$(CONFIG_CMD_CRAMFS) += cramfs.o
obj-$(CONFIG_CMD_LDRINFO) += ldrinfo.o
obj-$(CONFIG_LED_STATUS_CMD) += led.o
obj-$(CONFIG_LED_STATUS_CMD) += legacy_led.o
obj-$(CONFIG_CMD_LED) += led.o
obj-$(CONFIG_CMD_LICENSE) += license.o
obj-y += load.o
obj-$(CONFIG_LOGBUFFER) += log.o
......
cmd/led.c
浏览文件 @ 51f866e8
/*
* (C) Copyright 2010
* Jason Kridner <jkridner@beagleboard.org>
* Copyright (c) 2017 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*
* Based on cmd_led.c patch from:
* http://www.mail-archive.com/u-boot@lists.denx.de/msg06873.html
* (C) Copyright 2008
* Ulf Samuelsson <ulf.samuelsson@atmel.com>
*
* SPDX-License-Identifier: GPL-2.0+
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <config.h>
#include <command.h>
#include <status_led.h>
struct led_tbl_s {
char *string; /* String for use in the command */
led_id_t mask; /* Mask used for calling __led_set() */
void (*off)(void); /* Optional function for turning LED off */
void (*on)(void); /* Optional function for turning LED on */
void (*toggle)(void);/* Optional function for toggling LED */
};
#include <dm.h>
#include <led.h>
#include <dm/uclass-internal.h>
typedef struct led_tbl_s led_tbl_t;
#define LED_TOGGLE LEDST_COUNT
static const led_tbl_t led_commands[] = {
#ifdef CONFIG_LED_STATUS_BOARD_SPECIFIC
#ifdef CONFIG_LED_STATUS0
{ "0", CONFIG_LED_STATUS_BIT, NULL, NULL, NULL },
#endif
#ifdef CONFIG_LED_STATUS1
{ "1", CONFIG_LED_STATUS_BIT1, NULL, NULL, NULL },
#endif
#ifdef CONFIG_LED_STATUS2
{ "2", CONFIG_LED_STATUS_BIT2, NULL, NULL, NULL },
#endif
#ifdef CONFIG_LED_STATUS3
{ "3", CONFIG_LED_STATUS_BIT3, NULL, NULL, NULL },
#endif
#ifdef CONFIG_LED_STATUS4
{ "4", CONFIG_LED_STATUS_BIT4, NULL, NULL, NULL },
#endif
#ifdef CONFIG_LED_STATUS5
{ "5", CONFIG_LED_STATUS_BIT5, NULL, NULL, NULL },
#endif
#endif
#ifdef CONFIG_LED_STATUS_GREEN
{ "green", CONFIG_LED_STATUS_GREEN, green_led_off, green_led_on, NULL },
#endif
#ifdef CONFIG_LED_STATUS_YELLOW
{ "yellow", CONFIG_LED_STATUS_YELLOW, yellow_led_off, yellow_led_on,
NULL },
#endif
#ifdef CONFIG_LED_STATUS_RED
{ "red", CONFIG_LED_STATUS_RED, red_led_off, red_led_on, NULL },
#endif
#ifdef CONFIG_LED_STATUS_BLUE
{ "blue", CONFIG_LED_STATUS_BLUE, blue_led_off, blue_led_on, NULL },
static const char *const state_label[] = {
[LEDST_OFF] = "off",
[LEDST_ON] = "on",
[LEDST_TOGGLE] = "toggle",
#ifdef CONFIG_LED_BLINK
[LEDST_BLINK] = "blink",
#endif
{ NULL, 0, NULL, NULL, NULL }
};
enum led_cmd { LED_ON, LED_OFF, LED_TOGGLE, LED_BLINK };
enum led_cmd get_led_cmd(char *var)
enum led_state_t get_led_cmd(char *var)
{
if (strcmp(var, "off") == 0)
return LED_OFF;
if (strcmp(var, "on") == 0)
return LED_ON;
if (strcmp(var, "toggle") == 0)
return LED_TOGGLE;
if (strcmp(var, "blink") == 0)
return LED_BLINK;
int i;
for (i = 0; i < LEDST_COUNT; i++) {
if (!strncmp(var, state_label[i], strlen(var)))
return i;
}
return -1;
}
/*
* LED drivers providing a blinking LED functionality, like the
* PCA9551, can override this empty weak function
*/
void __weak __led_blink(led_id_t mask, int freq)
static int show_led_state(struct udevice *dev)
{
int ret;
ret = led_get_state(dev);
if (ret >= LEDST_COUNT)
ret = -EINVAL;
if (ret >= 0)
printf("%s\n", state_label[ret]);
return ret;
}
static int list_leds(void)
{
struct udevice *dev;
int ret;
for (uclass_find_first_device(UCLASS_LED, &dev);
dev;
uclass_find_next_device(&dev)) {
struct led_uc_plat *plat = dev_get_uclass_platdata(dev);
if (!plat->label)
continue;
printf("%-15s ", plat->label);
if (device_active(dev)) {
ret = show_led_state(dev);
if (ret < 0)
printf("Error %d\n", ret);
} else {
printf("<inactive>\n");
}
}
return 0;
}
int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
int do_led(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i, match = 0;
enum led_cmd cmd;
int freq;
enum led_state_t cmd;
const char *led_label;
struct udevice *dev;
#ifdef CONFIG_LED_BLINK
int freq_ms = 0;
#endif
int ret;
/* Validate arguments */
if ((argc < 3) || (argc > 4))
if (argc < 2)
return CMD_RET_USAGE;
led_label = argv[1];
if (*led_label == 'l')
return list_leds();
cmd = get_led_cmd(argv[2]);
if (cmd < 0) {
cmd = argc > 2 ? get_led_cmd(argv[2]) : LEDST_COUNT;
if (cmd < 0)
return CMD_RET_USAGE;
#ifdef CONFIG_LED_BLINK
if (cmd == LEDST_BLINK) {
if (argc < 4)
return CMD_RET_USAGE;
freq_ms = simple_strtoul(argv[3], NULL, 10);
}
for (i = 0; led_commands[i].string; i++) {
if ((strcmp("all", argv[1]) == 0) ||
(strcmp(led_commands[i].string, argv[1]) == 0)) {
match = 1;
switch (cmd) {
case LED_ON:
if (led_commands[i].on)
led_commands[i].on();
else
__led_set(led_commands[i].mask,
CONFIG_LED_STATUS_ON);
break;
case LED_OFF:
if (led_commands[i].off)
led_commands[i].off();
else
__led_set(led_commands[i].mask,
CONFIG_LED_STATUS_OFF);
break;
case LED_TOGGLE:
if (led_commands[i].toggle)
led_commands[i].toggle();
else
__led_toggle(led_commands[i].mask);
break;
case LED_BLINK:
if (argc != 4)
return CMD_RET_USAGE;
freq = simple_strtoul(argv[3], NULL, 10);
__led_blink(led_commands[i].mask, freq);
}
/* Need to set only 1 led if led_name wasn't 'all' */
if (strcmp("all", argv[1]) != 0)
break;
}
#endif
ret = led_get_by_label(led_label, &dev);
if (ret) {
printf("LED '%s' not found (err=%d)\n", led_label, ret);
return CMD_RET_FAILURE;
}
/* If we ran out of matches, print Usage */
if (!match) {
return CMD_RET_USAGE;
switch (cmd) {
case LEDST_OFF:
case LEDST_ON:
case LEDST_TOGGLE:
ret = led_set_state(dev, cmd);
break;
#ifdef CONFIG_LED_BLINK
case LEDST_BLINK:
ret = led_set_period(dev, freq_ms);
if (!ret)
ret = led_set_state(dev, LEDST_BLINK);
break;
#endif
case LEDST_COUNT:
printf("LED '%s': ", led_label);
ret = show_led_state(dev);
break;
}
if (ret < 0) {
printf("LED '%s' operation failed (err=%d)\n", led_label, ret);
return CMD_RET_FAILURE;
}
return 0;
}
#ifdef CONFIG_LED_BLINK
#define BLINK "|blink [blink-freq in ms]"
#else
#define BLINK ""
#endif
U_BOOT_CMD(
led, 4, 1, do_led,
"["
#ifdef CONFIG_LED_STATUS_BOARD_SPECIFIC
#ifdef CONFIG_LED_STATUS0
"0|"
#endif
#ifdef CONFIG_LED_STATUS1
"1|"
#endif
#ifdef CONFIG_LED_STATUS2
"2|"
#endif
#ifdef CONFIG_LED_STATUS3
"3|"
#endif
#ifdef CONFIG_LED_STATUS4
"4|"
#endif
#ifdef CONFIG_LED_STATUS5
"5|"
#endif
#endif
#ifdef CONFIG_LED_STATUS_GREEN
"green|"
#endif
#ifdef CONFIG_LED_STATUS_YELLOW
"yellow|"
#endif
#ifdef CONFIG_LED_STATUS_RED
"red|"
#endif
#ifdef CONFIG_LED_STATUS_BLUE
"blue|"
#endif
"all] [on|off|toggle|blink] [blink-freq in ms]",
"[led_name] [on|off|toggle|blink] sets or clears led(s)"
"manage LEDs",
"<led_label> on|off|toggle" BLINK "\tChange LED state\n"
"led [<led_label>\tGet LED state\n"
"led list\t\tshow a list of LEDs"
);
cmd/legacy_led.c 0 → 100644
浏览文件 @ 51f866e8
/*
* (C) Copyright 2010
* Jason Kridner <jkridner@beagleboard.org>
*
* Based on cmd_led.c patch from:
* http://www.mail-archive.com/u-boot@lists.denx.de/msg06873.html
* (C) Copyright 2008
* Ulf Samuelsson <ulf.samuelsson@atmel.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <config.h>
#include <command.h>
#include <status_led.h>
struct led_tbl_s {
char *string; /* String for use in the command */
led_id_t mask; /* Mask used for calling __led_set() */
void (*off)(void); /* Optional function for turning LED off */
void (*on)(void); /* Optional function for turning LED on */
void (*toggle)(void);/* Optional function for toggling LED */
};
typedef struct led_tbl_s led_tbl_t;
static const led_tbl_t led_commands[] = {
#ifdef CONFIG_LED_STATUS_BOARD_SPECIFIC
#ifdef CONFIG_LED_STATUS0
{ "0", CONFIG_LED_STATUS_BIT, NULL, NULL, NULL },
#endif
#ifdef CONFIG_LED_STATUS1
{ "1", CONFIG_LED_STATUS_BIT1, NULL, NULL, NULL },
#endif
#ifdef CONFIG_LED_STATUS2
{ "2", CONFIG_LED_STATUS_BIT2, NULL, NULL, NULL },
#endif
#ifdef CONFIG_LED_STATUS3
{ "3", CONFIG_LED_STATUS_BIT3, NULL, NULL, NULL },
#endif
#ifdef CONFIG_LED_STATUS4
{ "4", CONFIG_LED_STATUS_BIT4, NULL, NULL, NULL },
#endif
#ifdef CONFIG_LED_STATUS5
{ "5", CONFIG_LED_STATUS_BIT5, NULL, NULL, NULL },
#endif
#endif
#ifdef CONFIG_LED_STATUS_GREEN
{ "green", CONFIG_LED_STATUS_GREEN, green_led_off, green_led_on, NULL },
#endif
#ifdef CONFIG_LED_STATUS_YELLOW
{ "yellow", CONFIG_LED_STATUS_YELLOW, yellow_led_off, yellow_led_on,
NULL },
#endif
#ifdef CONFIG_LED_STATUS_RED
{ "red", CONFIG_LED_STATUS_RED, red_led_off, red_led_on, NULL },
#endif
#ifdef CONFIG_LED_STATUS_BLUE
{ "blue", CONFIG_LED_STATUS_BLUE, blue_led_off, blue_led_on, NULL },
#endif
{ NULL, 0, NULL, NULL, NULL }
};
enum led_cmd { LED_ON, LED_OFF, LED_TOGGLE, LED_BLINK };
enum led_cmd get_led_cmd(char *var)
{
if (strcmp(var, "off") == 0)
return LED_OFF;
if (strcmp(var, "on") == 0)
return LED_ON;
if (strcmp(var, "toggle") == 0)
return LED_TOGGLE;
if (strcmp(var, "blink") == 0)
return LED_BLINK;
return -1;
}
/*
* LED drivers providing a blinking LED functionality, like the
* PCA9551, can override this empty weak function
*/
void __weak __led_blink(led_id_t mask, int freq)
{
}
int do_legacy_led(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i, match = 0;
enum led_cmd cmd;
int freq;
/* Validate arguments */
if ((argc < 3) || (argc > 4))
return CMD_RET_USAGE;
cmd = get_led_cmd(argv[2]);
if (cmd < 0) {
return CMD_RET_USAGE;
}
for (i = 0; led_commands[i].string; i++) {
if ((strcmp("all", argv[1]) == 0) ||
(strcmp(led_commands[i].string, argv[1]) == 0)) {
match = 1;
switch (cmd) {
case LED_ON:
if (led_commands[i].on)
led_commands[i].on();
else
__led_set(led_commands[i].mask,
CONFIG_LED_STATUS_ON);
break;
case LED_OFF:
if (led_commands[i].off)
led_commands[i].off();
else
__led_set(led_commands[i].mask,
CONFIG_LED_STATUS_OFF);
break;
case LED_TOGGLE:
if (led_commands[i].toggle)
led_commands[i].toggle();
else
__led_toggle(led_commands[i].mask);
break;
case LED_BLINK:
if (argc != 4)
return CMD_RET_USAGE;
freq = simple_strtoul(argv[3], NULL, 10);
__led_blink(led_commands[i].mask, freq);
}
/* Need to set only 1 led if led_name wasn't 'all' */
if (strcmp("all", argv[1]) != 0)
break;
}
}
/* If we ran out of matches, print Usage */
if (!match) {
return CMD_RET_USAGE;
}
return 0;
}
U_BOOT_CMD(
led, 4, 1, do_legacy_led,
"["
#ifdef CONFIG_LED_STATUS_BOARD_SPECIFIC
#ifdef CONFIG_LED_STATUS0
"0|"
#endif
#ifdef CONFIG_LED_STATUS1
"1|"
#endif
#ifdef CONFIG_LED_STATUS2
"2|"
#endif
#ifdef CONFIG_LED_STATUS3
"3|"
#endif
#ifdef CONFIG_LED_STATUS4
"4|"
#endif
#ifdef CONFIG_LED_STATUS5
"5|"
#endif
#endif
#ifdef CONFIG_LED_STATUS_GREEN
"green|"
#endif
#ifdef CONFIG_LED_STATUS_YELLOW
"yellow|"
#endif
#ifdef CONFIG_LED_STATUS_RED
"red|"
#endif
#ifdef CONFIG_LED_STATUS_BLUE
"blue|"
#endif
"all] [on|off|toggle|blink] [blink-freq in ms]",
"[led_name] [on|off|toggle|blink] sets or clears led(s)"
);
common/scsi.c
浏览文件 @ 51f866e8
......@@ -473,14 +473,15 @@ static void scsi_init_dev_desc(struct blk_desc *dev_desc, int devnum)
* scsi_detect_dev - Detect scsi device
*
* @target: target id
* @lun: target lun
* @dev_desc: block device description
*
* The scsi_detect_dev detects and fills a dev_desc structure when the device is
* detected. The LUN number is taken from the struct blk_desc *dev_desc.
* detected.
*
* Return: 0 on success, error value otherwise
*/
static int scsi_detect_dev(int target, struct blk_desc *dev_desc)
static int scsi_detect_dev(int target, int lun, struct blk_desc *dev_desc)
{
unsigned char perq, modi;
lbaint_t capacity;
......@@ -488,7 +489,7 @@ static int scsi_detect_dev(int target, struct blk_desc *dev_desc)
ccb *pccb = (ccb *)&tempccb;
pccb->target = target;
pccb->lun = dev_desc->lun;
pccb->lun = lun;
pccb->pdata = (unsigned char *)&tempbuff;
pccb->datalen = 512;
scsi_setup_inquiry(pccb);
......@@ -539,7 +540,6 @@ static int scsi_detect_dev(int target, struct blk_desc *dev_desc)
dev_desc->blksz = blksz;
dev_desc->log2blksz = LOG2(dev_desc->blksz);
dev_desc->type = perq;
part_init(&dev_desc[0]);
removable:
return 0;
}
......@@ -580,9 +580,19 @@ int scsi_scan(int mode)
for (lun = 0; lun < plat->max_lun; lun++) {
struct udevice *bdev; /* block device */
/* block device description */
struct blk_desc _bd;
struct blk_desc *bdesc;
char str[10];
scsi_init_dev_desc_priv(&_bd);
ret = scsi_detect_dev(i, lun, &_bd);
if (ret)
/*
* no device detected?
* check the next lun.
*/
continue;
/*
* Create only one block device and do detection
* to make sure that there won't be a lot of
......@@ -590,21 +600,28 @@ int scsi_scan(int mode)
*/
snprintf(str, sizeof(str), "id%dlun%d", i, lun);
ret = blk_create_devicef(dev, "scsi_blk",
str, IF_TYPE_SCSI,
-1, 0, 0, &bdev);
str, IF_TYPE_SCSI,
-1,
_bd.blksz,
_bd.blksz * _bd.lba,
&bdev);
if (ret) {
debug("Can't create device\n");
return ret;
}
bdesc = dev_get_uclass_platdata(bdev);
scsi_init_dev_desc_priv(bdesc);
bdesc = dev_get_uclass_platdata(bdev);
bdesc->target = i;
bdesc->lun = lun;
ret = scsi_detect_dev(i, bdesc);
if (ret) {
device_unbind(bdev);
continue;
}
bdesc->removable = _bd.removable;
bdesc->type = _bd.type;
memcpy(&bdesc->vendor, &_bd.vendor,
sizeof(_bd.vendor));
memcpy(&bdesc->product, &_bd.product,
sizeof(_bd.product));
memcpy(&bdesc->revision, &_bd.revision,
sizeof(_bd.revision));
part_init(bdesc);
if (mode == 1) {
printf(" Device %d: ", 0);
......@@ -630,10 +647,11 @@ int scsi_scan(int mode)
scsi_max_devs = 0;
for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
for (lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) {
scsi_dev_desc[scsi_max_devs].lun = lun;
ret = scsi_detect_dev(i, &scsi_dev_desc[scsi_max_devs]);
ret = scsi_detect_dev(i, lun,
&scsi_dev_desc[scsi_max_devs]);
if (ret)
continue;
part_init(&scsi_dev_desc[scsi_max_devs]);
if (mode == 1) {
printf(" Device %d: ", 0);
......
configs/sama5d3_xplained_mmc_defconfig
浏览文件 @ 51f866e8
......@@ -4,15 +4,19 @@ CONFIG_TARGET_SAMA5D3_XPLAINED=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_FAT_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
......@@ -29,6 +33,35 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CLK_AT91=y
CONFIG_AT91_UTMI=y
CONFIG_AT91_H32MX=y
CONFIG_DM_GPIO=y
CONFIG_AT91_GPIO=y
CONFIG_DM_MMC=y
CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_DM_ETH=y
CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ATMEL=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
configs/sama5d3_xplained_nandflash_defconfig
浏览文件 @ 51f866e8
......@@ -6,6 +6,9 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
......@@ -27,6 +30,35 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CLK_AT91=y
CONFIG_AT91_UTMI=y
CONFIG_AT91_H32MX=y
CONFIG_DM_GPIO=y
CONFIG_AT91_GPIO=y
CONFIG_DM_MMC=y
CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_DM_ETH=y
CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ATMEL=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
configs/sama5d3xek_mmc_defconfig
浏览文件 @ 51f866e8
......@@ -4,10 +4,13 @@ CONFIG_TARGET_SAMA5D3XEK=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_FAT_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek"
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC"
CONFIG_BOOTDELAY=3
......@@ -15,6 +18,7 @@ CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
......@@ -26,13 +30,47 @@ CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CLK_AT91=y
CONFIG_AT91_UTMI=y
CONFIG_AT91_H32MX=y
CONFIG_DM_GPIO=y
CONFIG_AT91_GPIO=y
CONFIG_DM_MMC=y
CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_DM_ETH=y
CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ATMEL=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_LCD=y
CONFIG_OF_LIBFDT=y
configs/sama5d3xek_nandflash_defconfig
浏览文件 @ 51f866e8
......@@ -4,8 +4,11 @@ CONFIG_TARGET_SAMA5D3XEK=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek"
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
......@@ -25,12 +28,44 @@ CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CLK_AT91=y
CONFIG_AT91_UTMI=y
CONFIG_AT91_H32MX=y
CONFIG_DM_GPIO=y
CONFIG_AT91_GPIO=y
CONFIG_DM_MMC=y
CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_DM_ETH=y
CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ATMEL=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_LCD=y
CONFIG_OF_LIBFDT=y
configs/sama5d3xek_spiflash_defconfig
浏览文件 @ 51f866e8
......@@ -4,20 +4,23 @@ CONFIG_TARGET_SAMA5D3XEK=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek"
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_SERIALFLASH"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
......@@ -26,12 +29,44 @@ CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CLK_AT91=y
CONFIG_AT91_UTMI=y
CONFIG_AT91_H32MX=y
CONFIG_DM_GPIO=y
CONFIG_AT91_GPIO=y
CONFIG_DM_MMC=y
CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_DM_ETH=y
CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ATMEL=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_LCD=y
CONFIG_OF_LIBFDT=y
configs/sandbox_defconfig
浏览文件 @ 51f866e8
......@@ -83,6 +83,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_CROS_EC_KEYB=y
CONFIG_I8042_KEYB=y
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
CONFIG_DM_MAILBOX=y
CONFIG_SANDBOX_MBOX=y
......
configs/sandbox_noblk_defconfig
浏览文件 @ 51f866e8
......@@ -92,6 +92,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_CROS_EC_KEYB=y
CONFIG_I8042_KEYB=y
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
......
configs/sandbox_spl_defconfig
浏览文件 @ 51f866e8
......@@ -94,6 +94,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_CROS_EC_KEYB=y
CONFIG_I8042_KEYB=y
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
CONFIG_DM_MAILBOX=y
CONFIG_SANDBOX_MBOX=y
......
drivers/led/Kconfig
浏览文件 @ 51f866e8
......@@ -9,6 +9,15 @@ config LED
can provide access to board-specific LEDs. Use of the device tree
for configuration is encouraged.
config LED_BLINK
bool "Support LED blinking"
depends on LED
help
Some drivers can support automatic blinking of LEDs with a given
period, without needing timers or extra code to handle the timing.
This option enables support for this which adds slightly to the
code size.
config SPL_LED
bool "Enable LED support in SPL"
depends on SPL && SPL_DM
......@@ -17,6 +26,7 @@ config SPL_LED
If this is acceptable and you have a need to use LEDs in SPL,
enable this option. You will need to enable device tree in SPL
for this to work.
config LED_GPIO
bool "LED support for GPIO-connected LEDs"
depends on LED && DM_GPIO
......
drivers/led/led-uclass.c
浏览文件 @ 51f866e8
......@@ -22,7 +22,7 @@ int led_get_by_label(const char *label, struct udevice **devp)
if (ret)
return ret;
uclass_foreach_dev(dev, uc) {
struct led_uclass_plat *uc_plat = dev_get_uclass_platdata(dev);
struct led_uc_plat *uc_plat = dev_get_uclass_platdata(dev);
/* Ignore the top-level LED node */
if (uc_plat->label && !strcmp(label, uc_plat->label))
......@@ -32,18 +32,40 @@ int led_get_by_label(const char *label, struct udevice **devp)
return -ENODEV;
}
int led_set_on(struct udevice *dev, int on)
int led_set_state(struct udevice *dev, enum led_state_t state)
{
struct led_ops *ops = led_get_ops(dev);
if (!ops->set_on)
if (!ops->set_state)
return -ENOSYS;
return ops->set_on(dev, on);
return ops->set_state(dev, state);
}
enum led_state_t led_get_state(struct udevice *dev)
{
struct led_ops *ops = led_get_ops(dev);
if (!ops->get_state)
return -ENOSYS;
return ops->get_state(dev);
}
#ifdef CONFIG_LED_BLINK
int led_set_period(struct udevice *dev, int period_ms)
{
struct led_ops *ops = led_get_ops(dev);
if (!ops->set_period)
return -ENOSYS;
return ops->set_period(dev, period_ms);
}
#endif
UCLASS_DRIVER(led) = {
.id = UCLASS_LED,
.name = "led",
.per_device_platdata_auto_alloc_size = sizeof(struct led_uclass_plat),
.per_device_platdata_auto_alloc_size = sizeof(struct led_uc_plat),
};
drivers/led/led_gpio.c
浏览文件 @ 51f866e8
......@@ -18,19 +18,47 @@ struct led_gpio_priv {
struct gpio_desc gpio;
};
static int gpio_led_set_on(struct udevice *dev, int on)
static int gpio_led_set_state(struct udevice *dev, enum led_state_t state)
{
struct led_gpio_priv *priv = dev_get_priv(dev);
int ret;
if (!dm_gpio_is_valid(&priv->gpio))
return -EREMOTEIO;
switch (state) {
case LEDST_OFF:
case LEDST_ON:
break;
case LEDST_TOGGLE:
ret = dm_gpio_get_value(&priv->gpio);
if (ret < 0)
return ret;
state = !ret;
break;
default:
return -ENOSYS;
}
return dm_gpio_set_value(&priv->gpio, state);
}
static enum led_state_t gpio_led_get_state(struct udevice *dev)
{
struct led_gpio_priv *priv = dev_get_priv(dev);
int ret;
if (!dm_gpio_is_valid(&priv->gpio))
return -EREMOTEIO;
ret = dm_gpio_get_value(&priv->gpio);
if (ret < 0)
return ret;
return dm_gpio_set_value(&priv->gpio, on);
return ret ? LEDST_ON : LEDST_OFF;
}
static int led_gpio_probe(struct udevice *dev)
{
struct led_uclass_plat *uc_plat = dev_get_uclass_platdata(dev);
struct led_uc_plat *uc_plat = dev_get_uclass_platdata(dev);
struct led_gpio_priv *priv = dev_get_priv(dev);
/* Ignore the top-level LED node */
......@@ -65,7 +93,7 @@ static int led_gpio_bind(struct udevice *parent)
for (node = fdt_first_subnode(blob, dev_of_offset(parent));
node > 0;
node = fdt_next_subnode(blob, node)) {
struct led_uclass_plat *uc_plat;
struct led_uc_plat *uc_plat;
const char *label;
label = fdt_getprop(blob, node, "label", NULL);
......@@ -87,7 +115,8 @@ static int led_gpio_bind(struct udevice *parent)
}
static const struct led_ops gpio_led_ops = {
.set_on = gpio_led_set_on,
.set_state = gpio_led_set_state,
.get_state = gpio_led_get_state,
};
static const struct udevice_id led_gpio_ids[] = {
......
include/configs/sama5d3_xplained.h
浏览文件 @ 51f866e8
......@@ -12,11 +12,6 @@
#include "at91-sama5_common.h"
/* serial console */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_DBGU
/*
* This needs to be defined for the OHCI code to work but it is defined as
* ATMEL_ID_UHPHS in the CPU specific header files.
......@@ -34,10 +29,10 @@
#define CONFIG_SYS_SDRAM_SIZE 0x10000000
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR 0x310000
#define CONFIG_SYS_INIT_SP_ADDR 0x318000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
/* NAND flash */
......@@ -67,21 +62,6 @@
#define CONFIG_CMD_UBIFS
#endif
/* Ethernet Hardware */
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_MACB_SEARCH_PHY
#define CONFIG_RGMII
#define CONFIG_PHYLIB
/* MMC */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_ATMEL_MCI_8BIT
#endif
/* USB */
#ifdef CONFIG_CMD_USB
......@@ -111,7 +91,7 @@
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_MAX_SIZE 0x18000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
......
include/configs/sama5d3xek.h
浏览文件 @ 51f866e8
......@@ -17,11 +17,6 @@
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
/* serial console */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_DBGU
/*
* This needs to be defined for the OHCI code to work but it is defined as
* ATMEL_ID_UHPHS in the CPU specific header files.
......@@ -62,16 +57,15 @@
#define CONFIG_SYS_SDRAM_SIZE 0x20000000
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR 0x310000
#define CONFIG_SYS_INIT_SP_ADDR 0x318000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
/* SerialFlash */
#ifdef CONFIG_CMD_SF
#define CONFIG_ATMEL_SPI
#define CONFIG_SF_DEFAULT_SPEED 30000000
#endif
......@@ -95,27 +89,11 @@
#define CONFIG_CMD_NAND_TRIMFFS
#endif
/* Ethernet Hardware */
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_MACB_SEARCH_PHY
#define CONFIG_RGMII
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
/* MMC */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define ATMEL_BASE_MMCI ATMEL_BASE_MCI0
#endif
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_CPU_INIT
......@@ -124,11 +102,6 @@
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
#endif
/* USB device */
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D3xEK"
#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
#define CONFIG_FAT_WRITE
#endif
......@@ -148,7 +121,7 @@
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_MAX_SIZE 0x18000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
......@@ -176,7 +149,7 @@
#elif CONFIG_SYS_USE_SERIALFLASH
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#endif
......
include/led.h
浏览文件 @ 51f866e8
......@@ -9,23 +9,65 @@
#define __LED_H
/**
* struct led_uclass_plat - Platform data the uclass stores about each device
* struct led_uc_plat - Platform data the uclass stores about each device
*
* @label: LED label
*/
struct led_uclass_plat {
struct led_uc_plat {
const char *label;
};
/**
* struct led_uc_priv - Private data the uclass stores about each device
*
* @period_ms: Flash period in milliseconds
*/
struct led_uc_priv {
int period_ms;
};
enum led_state_t {
LEDST_OFF = 0,
LEDST_ON = 1,
LEDST_TOGGLE,
#ifdef CONFIG_LED_BLINK
LEDST_BLINK,
#endif
LEDST_COUNT,
};
struct led_ops {
/**
* set_on() - set the state of an LED
* set_state() - set the state of an LED
*
* @dev: LED device to change
* @on: 1 to turn the LED on, 0 to turn it off
* @state: LED state to set
* @return 0 if OK, -ve on error
*/
int (*set_on)(struct udevice *dev, int on);
int (*set_state)(struct udevice *dev, enum led_state_t state);
/**
* led_get_state() - get the state of an LED
*
* @dev: LED device to change
* @return LED state led_state_t, or -ve on error
*/
enum led_state_t (*get_state)(struct udevice *dev);
#ifdef CONFIG_LED_BLINK
/**
* led_set_period() - set the blink period of an LED
*
* Thie records the period if supported, or returns -ENOSYS if not.
* To start the LED blinking, use set_state().
*
* @dev: LED device to change
* @period_ms: LED blink period in milliseconds
* @return 0 if OK, -ve on error
*/
int (*set_period)(struct udevice *dev, int period_ms);
#endif
};
#define led_get_ops(dev) ((struct led_ops *)(dev)->driver->ops)
......@@ -40,12 +82,29 @@ struct led_ops {
int led_get_by_label(const char *label, struct udevice **devp);
/**
* led_set_on() - set the state of an LED
* led_set_state() - set the state of an LED
*
* @dev: LED device to change
* @state: LED state to set
* @return 0 if OK, -ve on error
*/
int led_set_state(struct udevice *dev, enum led_state_t state);
/**
* led_get_state() - get the state of an LED
*
* @dev: LED device to change
* @return LED state led_state_t, or -ve on error
*/
enum led_state_t led_get_state(struct udevice *dev);
/**
* led_set_period() - set the blink period of an LED
*
* @dev: LED device to change
* @on: 1 to turn the LED on, 0 to turn it off
* @period_ms: LED blink period in milliseconds
* @return 0 if OK, -ve on error
*/
int led_set_on(struct udevice *dev, int on);
int led_set_period(struct udevice *dev, int period_ms);
#endif
test/dm/led.c
浏览文件 @ 51f866e8
......@@ -41,15 +41,43 @@ static int dm_test_led_gpio(struct unit_test_state *uts)
ut_assertok(uclass_get_device(UCLASS_LED, 1, &dev));
ut_assertok(uclass_get_device(UCLASS_GPIO, 1, &gpio));
ut_asserteq(0, sandbox_gpio_get_value(gpio, offset));
led_set_on(dev, 1);
ut_assertok(led_set_state(dev, LEDST_ON));
ut_asserteq(1, sandbox_gpio_get_value(gpio, offset));
led_set_on(dev, 0);
ut_asserteq(LEDST_ON, led_get_state(dev));
ut_assertok(led_set_state(dev, LEDST_OFF));
ut_asserteq(0, sandbox_gpio_get_value(gpio, offset));
ut_asserteq(LEDST_OFF, led_get_state(dev));
return 0;
}
DM_TEST(dm_test_led_gpio, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
/* Test that we can toggle LEDs */
static int dm_test_led_toggle(struct unit_test_state *uts)
{
const int offset = 1;
struct udevice *dev, *gpio;
/*
* Check that we can manipulate an LED. LED 1 is connected to GPIO
* bank gpio_a, offset 1.
*/
ut_assertok(uclass_get_device(UCLASS_LED, 1, &dev));
ut_assertok(uclass_get_device(UCLASS_GPIO, 1, &gpio));
ut_asserteq(0, sandbox_gpio_get_value(gpio, offset));
ut_assertok(led_set_state(dev, LEDST_TOGGLE));
ut_asserteq(1, sandbox_gpio_get_value(gpio, offset));
ut_asserteq(LEDST_ON, led_get_state(dev));
ut_assertok(led_set_state(dev, LEDST_TOGGLE));
ut_asserteq(0, sandbox_gpio_get_value(gpio, offset));
ut_asserteq(LEDST_OFF, led_get_state(dev));
return 0;
}
DM_TEST(dm_test_led_toggle, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
/* Test obtaining an LED by label */
static int dm_test_led_label(struct unit_test_state *uts)
{
......@@ -70,3 +98,27 @@ static int dm_test_led_label(struct unit_test_state *uts)
return 0;
}
DM_TEST(dm_test_led_label, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
/* Test LED blinking */
#ifdef CONFIG_LED_BLINK
static int dm_test_led_blink(struct unit_test_state *uts)
{
const int offset = 1;
struct udevice *dev, *gpio;
/*
* Check that we get an error when trying to blink an LED, since it is
* not supported by the GPIO LED driver.
*/
ut_assertok(uclass_get_device(UCLASS_LED, 1, &dev));
ut_assertok(uclass_get_device(UCLASS_GPIO, 1, &gpio));
ut_asserteq(0, sandbox_gpio_get_value(gpio, offset));
ut_asserteq(-ENOSYS, led_set_state(dev, LEDST_BLINK));
ut_asserteq(0, sandbox_gpio_get_value(gpio, offset));
ut_asserteq(LEDST_OFF, led_get_state(dev));
ut_asserteq(-ENOSYS, led_set_period(dev, 100));
return 0;
}
DM_TEST(dm_test_led_blink, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或