ARM: da850-evm: Enable SPI Flash and NAND Flash when booting NOR

Historically there have been various boot options, SPI flash,
NAND or NOR. The NOR flash is mutually exclusive with MMC, but
it isn't mutually exclusive with NAND or SPI Flash, so this patch
enables both NAND flash and SPI Flash when booting from NOR.
Signed-off-by: NAdam Ford <aford173@gmail.com>

board/davinci/da8xxevm/da850evm.c

@@ -234,7 +234,8 @@ const struct pinmux_resource pinmuxes[] = {
 	PINMUX_ITEM(emifa_pins_cs3),
 	PINMUX_ITEM(emifa_pins_cs4),
 	PINMUX_ITEM(emifa_pins_nand),
-#elif defined(CONFIG_USE_NOR)
+#endif
+#ifdef CONFIG_USE_NOR
 	PINMUX_ITEM(emifa_pins_cs2),
 	PINMUX_ITEM(emifa_pins_nor),
 #endif

configs/da850evm_direct_nor_defconfig

@@ -24,14 +24,15 @@ CONFIG_CMD_DM=y
 # CONFIG_CMD_GPT is not set
 # CONFIG_CMD_MMC is not set
 CONFIG_CMD_MTD=y
+CONFIG_CMD_NAND=y
 # CONFIG_CMD_PART is not set
 # CONFIG_CMD_SF is not set
 # CONFIG_CMD_SPI is not set
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_TIME is not set
 CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.2"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.2:1m(u-boot),128k(u-boot-env),-(spare)"
+CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.2,nor1=spi1.0,nand0=nand512"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.2:1m(u-boot),128k(u-boot-env),-(spare);spi1.0:32k(SPL),480k(u-boot),64k(u-boot-env),7552k(kernel-spare),64k(MAC-Address);nand512:128k(u-boot env),512k(u-boot),128k(spl-os),8m(kernel),-(rootfs)"
 CONFIG_CMD_DIAG=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="da850-evm"
@@ -49,10 +50,13 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_NAND=y
+CONFIG_NAND_DAVINCI=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_DM_ETH=y
 CONFIG_MII=y
 CONFIG_DRIVER_TI_EMAC=y