rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
上级 d8cc04d0
......@@ -2255,7 +2255,7 @@ to save the current settings.
environment area within the total memory of your DataFlash placed
at the specified address.
- CFG_ENV_IS_IN_NAND:
- CONFIG_ENV_IS_IN_NAND:
Define this if you have a NAND device which you want to use
for the environment.
......
......@@ -56,7 +56,7 @@ DECLARE_GLOBAL_DATA_PTR;
!defined(CONFIG_ENV_IS_IN_EEPROM) && \
!defined(CFG_ENV_IS_IN_FLASH) && \
!defined(CONFIG_ENV_IS_IN_DATAFLASH) && \
!defined(CFG_ENV_IS_IN_NAND) && \
!defined(CONFIG_ENV_IS_IN_NAND) && \
!defined(CFG_ENV_IS_IN_ONENAND) && \
!defined(CFG_ENV_IS_IN_SPI_FLASH) && \
!defined(CFG_ENV_IS_NOWHERE)
......
......@@ -133,7 +133,7 @@ uchar default_environment[] = {
"\0"
};
#if defined(CFG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */ \
#if defined(CONFIG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */ \
|| defined(CFG_ENV_IS_IN_SPI_FLASH)
int default_environment_size = sizeof(default_environment);
#endif
......
......@@ -34,7 +34,7 @@
#include <common.h>
#if defined(CFG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */
#if defined(CONFIG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */
#include <command.h>
#include <environment.h>
......@@ -367,4 +367,4 @@ static void use_default()
}
#endif
#endif /* CFG_ENV_IS_IN_NAND */
#endif /* CONFIG_ENV_IS_IN_NAND */
......@@ -385,7 +385,7 @@
* Environment
*/
#if defined(CONFIG_NAND_U_BOOT)
#define CFG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET (512 * 1024)
#define CFG_ENV_SECT_SIZE CFG_NAND_BLOCK_SIZE
#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
......
......@@ -107,7 +107,7 @@
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CONFIG_ENV_IS_IN_EEPROM 1 /* use FLASH for environment vars */
#else
#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
......@@ -200,7 +200,7 @@
#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
#endif
#ifdef CFG_ENV_IS_IN_NAND
#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
......
......@@ -98,7 +98,7 @@
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
......@@ -180,7 +180,7 @@
#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
#ifdef CFG_ENV_IS_IN_NAND
#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
......
......@@ -162,7 +162,7 @@
#else /* CFG_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */
#define CFG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x60000
#define CFG_ENV_OFFSET_REDUND 0x80000
#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
......
......@@ -162,7 +162,7 @@
#else /* CFG_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */
#define CFG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x60000
#define CFG_ENV_OFFSET_REDUND 0x80000
#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
......
......@@ -168,7 +168,7 @@
#else /* CFG_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */
#define CFG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x60000
#define CFG_ENV_OFFSET_REDUND 0x80000
#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
......
......@@ -137,7 +137,7 @@
#else /* CFG_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */
#define CFG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x60000
#define CFG_ENV_OFFSET_REDUND 0x80000
#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
......
......@@ -105,7 +105,7 @@
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
......@@ -183,7 +183,7 @@
#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
#ifdef CFG_ENV_IS_IN_NAND
#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
......
......@@ -115,7 +115,7 @@
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
#else
#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
......@@ -174,7 +174,7 @@
48, 49, 50, 51, 52, 53, 54, 55, \
56, 57, 58, 59, 60, 61, 62, 63}
#ifdef CFG_ENV_IS_IN_NAND
#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/canyonlands/u-boot-nand.lds for details.
......
......@@ -114,7 +114,7 @@
#ifdef CFG_USE_NAND
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#ifdef CFG_NAND_SMALLPAGE
#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
#define CFG_ENV_SIZE SZ_16K
......
......@@ -81,7 +81,7 @@
/*=====================*/
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
#define CFG_ENV_SIZE SZ_128K
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
......
......@@ -77,7 +77,7 @@
/* Flash & Environment */
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
#define CFG_ENV_SIZE SZ_128K
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
......
......@@ -114,7 +114,7 @@
#ifdef CFG_USE_NAND
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
#define CFG_ENV_SIZE SZ_16K
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
......
......@@ -262,7 +262,7 @@
#define CFG_NO_FLASH 1
#define CFG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x40000
#define CFG_ENV_OFFSET_REDUND 0x44000
#define CFG_ENV_SIZE 0x4000
......
......@@ -123,7 +123,7 @@
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
......@@ -200,7 +200,7 @@
#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
#ifdef CFG_ENV_IS_IN_NAND
#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
......
......@@ -270,7 +270,7 @@
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE_1 }
#ifdef CFG_NAND_BOOT
#define CFG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x80000 /* environment starts here */
#else
#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_128K)
......
......@@ -115,7 +115,7 @@
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environ vars */
#else
#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environ vars */
#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environ vars */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
......@@ -197,7 +197,7 @@
#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
#ifdef CFG_ENV_IS_IN_NAND
#ifdef CONFIG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
......
......@@ -284,7 +284,7 @@
*/
/* Settings as above boot configuration */
#define CFG_ENV_IS_IN_NAND
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_BOOTARGS "console=ttySAC,115200"
#if !defined(CONFIG_ENABLE_MMU)
......
......@@ -231,7 +231,7 @@
#define CFG_NO_FLASH 1
#define CFG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x40000
#define CFG_ENV_OFFSET_REDUND 0x44000
#define CFG_ENV_SIZE 0x4000
......
......@@ -69,12 +69,12 @@
# endif
#endif /* CFG_ENV_IS_IN_FLASH */
#if defined(CFG_ENV_IS_IN_NAND)
#if defined(CONFIG_ENV_IS_IN_NAND)
# ifndef CFG_ENV_OFFSET
# error "Need to define CFG_ENV_OFFSET when using CFG_ENV_IS_IN_NAND"
# error "Need to define CFG_ENV_OFFSET when using CONFIG_ENV_IS_IN_NAND"
# endif
# ifndef CFG_ENV_SIZE
# error "Need to define CFG_ENV_SIZE when using CFG_ENV_IS_IN_NAND"
# error "Need to define CFG_ENV_SIZE when using CONFIG_ENV_IS_IN_NAND"
# endif
# ifdef CFG_ENV_OFFSET_REDUND
# define CFG_REDUNDAND_ENVIRONMENT
......@@ -82,7 +82,7 @@
# ifdef CFG_ENV_IS_EMBEDDED
# define ENV_IS_EMBEDDED 1
# endif
#endif /* CFG_ENV_IS_IN_NAND */
#endif /* CONFIG_ENV_IS_IN_NAND */
#ifdef USE_HOSTCC
# include <stdint.h>
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册