提交 50f75002 编写于 作者: R Reinhard Meyer 提交者: Albert ARIBAUD

AT91: remove LEGACY from at91_rstc.h

Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
上级 a0cfd188
......@@ -41,29 +41,4 @@ typedef struct at91_rstc {
#define AT91_RSTC_SR_NRSTL 0x00010000
#ifdef CONFIG_AT91_LEGACY
#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */
#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */
#define AT91_RSTC_RSTTYP_GENERAL (0 << 8)
#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8)
#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8)
#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8)
#define AT91_RSTC_RSTTYP_USER (4 << 8)
#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */
#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */
#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */
#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
#endif /* CONFIG_AT91_LEGACY */
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册