Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 4eabf1e5 编写于 作者: S Simon Glass 提交者： Bin Meng
浏览文件
操作

x86: broadwell: Allow SDRAM init from SPL 

At present, for broadwell, SDRAM is always set up in U-Boot proper since
the 64-bit mode (which uses SDRAM init in SPL) is not supported.

Update the code to allow SDRAM init in SPL instead so that U-Boot proper
can be loaded into SDRAM and run from there. This allows U-Boot to be
compressed to reduce space, since it is not necessary to run it directly
from flash. It could later allow us to support 64-bit U-Boot on broadwell.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
上级 9f6486bf
隐藏空白更改
内联 并排
Showing with 101 addition and 94 deletion
arch/x86/cpu/broadwell/Makefile
浏览文件 @ 4eabf1e5
......@@ -13,4 +13,4 @@ obj-y += pinctrl_broadwell.o
obj-y += power_state.o
obj-y += refcode.o
obj-y += sata.o
obj-y += sdram.o
obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += sdram.o
arch/x86/cpu/broadwell/northbridge.c
浏览文件 @ 4eabf1e5
......@@ -6,8 +6,108 @@
#include <common.h>
#include <dm.h>
#include <asm/io.h>
#include <asm/mrc_common.h>
#include <asm/arch/iomap.h>
#include <asm/arch/pch.h>
#include <asm/arch/pei_data.h>
__weak asmlinkage void sdram_console_tx_byte(unsigned char byte)
{
#ifdef DEBUG
putc(byte);
#endif
}
void broadwell_fill_pei_data(struct pei_data *pei_data)
{
pei_data->pei_version = PEI_VERSION;
pei_data->board_type = BOARD_TYPE_ULT;
pei_data->pciexbar = MCFG_BASE_ADDRESS;
pei_data->smbusbar = SMBUS_BASE_ADDRESS;
pei_data->ehcibar = EARLY_EHCI_BAR;
pei_data->xhcibar = EARLY_XHCI_BAR;
pei_data->gttbar = EARLY_GTT_BAR;
pei_data->pmbase = ACPI_BASE_ADDRESS;
pei_data->gpiobase = GPIO_BASE_ADDRESS;
pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE;
pei_data->temp_mmio_base = EARLY_TEMP_MMIO;
pei_data->tx_byte = sdram_console_tx_byte;
pei_data->ddr_refresh_2x = 1;
}
static void pei_data_usb2_port(struct pei_data *pei_data, int port, uint length,
uint enable, uint oc_pin, uint location)
{
pei_data->usb2_ports[port].length = length;
pei_data->usb2_ports[port].enable = enable;
pei_data->usb2_ports[port].oc_pin = oc_pin;
pei_data->usb2_ports[port].location = location;
}
static void pei_data_usb3_port(struct pei_data *pei_data, int port, uint enable,
uint oc_pin, uint fixed_eq)
{
pei_data->usb3_ports[port].enable = enable;
pei_data->usb3_ports[port].oc_pin = oc_pin;
pei_data->usb3_ports[port].fixed_eq = fixed_eq;
}
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
/* DQ byte map for Samus board */
const u8 dq_map[2][6][2] = {
{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
{ 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } },
{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
{ 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } } };
/* DQS CPU<>DRAM map for Samus board */
const u8 dqs_map[2][8] = {
{ 2, 0, 1, 3, 6, 4, 7, 5 },
{ 2, 1, 0, 3, 6, 5, 4, 7 } };
pei_data->ec_present = 1;
/* One installed DIMM per channel */
pei_data->dimm_channel0_disabled = 2;
pei_data->dimm_channel1_disabled = 2;
memcpy(pei_data->dq_map, dq_map, sizeof(dq_map));
memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map));
/* P0: HOST PORT */
pei_data_usb2_port(pei_data, 0, 0x0080, 1, 0,
USB_PORT_BACK_PANEL);
/* P1: HOST PORT */
pei_data_usb2_port(pei_data, 1, 0x0080, 1, 1,
USB_PORT_BACK_PANEL);
/* P2: RAIDEN */
pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP,
USB_PORT_BACK_PANEL);
/* P3: SD CARD */
pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP,
USB_PORT_INTERNAL);
/* P4: RAIDEN */
pei_data_usb2_port(pei_data, 4, 0x0080, 1, USB_OC_PIN_SKIP,
USB_PORT_BACK_PANEL);
/* P5: WWAN (Disabled) */
pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP,
USB_PORT_SKIP);
/* P6: CAMERA */
pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP,
USB_PORT_INTERNAL);
/* P7: BT */
pei_data_usb2_port(pei_data, 7, 0x0040, 1, USB_OC_PIN_SKIP,
USB_PORT_INTERNAL);
/* P1: HOST PORT */
pei_data_usb3_port(pei_data, 0, 1, 0, 0);
/* P2: HOST PORT */
pei_data_usb3_port(pei_data, 1, 1, 1, 0);
/* P3: RAIDEN */
pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0);
/* P4: RAIDEN */
pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0);
}
static int broadwell_northbridge_early_init(struct udevice *dev)
{
......
arch/x86/cpu/broadwell/sdram.c
浏览文件 @ 4eabf1e5
......@@ -34,99 +34,6 @@ int dram_init_banksize(void)
return 0;
}
void broadwell_fill_pei_data(struct pei_data *pei_data)
{
pei_data->pei_version = PEI_VERSION;
pei_data->board_type = BOARD_TYPE_ULT;
pei_data->pciexbar = MCFG_BASE_ADDRESS;
pei_data->smbusbar = SMBUS_BASE_ADDRESS;
pei_data->ehcibar = EARLY_EHCI_BAR;
pei_data->xhcibar = EARLY_XHCI_BAR;
pei_data->gttbar = EARLY_GTT_BAR;
pei_data->pmbase = ACPI_BASE_ADDRESS;
pei_data->gpiobase = GPIO_BASE_ADDRESS;
pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE;
pei_data->temp_mmio_base = EARLY_TEMP_MMIO;
pei_data->tx_byte = sdram_console_tx_byte;
pei_data->ddr_refresh_2x = 1;
}
static inline void pei_data_usb2_port(struct pei_data *pei_data, int port,
uint16_t length, uint8_t enable,
uint8_t oc_pin, uint8_t location)
{
pei_data->usb2_ports[port].length = length;
pei_data->usb2_ports[port].enable = enable;
pei_data->usb2_ports[port].oc_pin = oc_pin;
pei_data->usb2_ports[port].location = location;
}
static inline void pei_data_usb3_port(struct pei_data *pei_data, int port,
uint8_t enable, uint8_t oc_pin,
uint8_t fixed_eq)
{
pei_data->usb3_ports[port].enable = enable;
pei_data->usb3_ports[port].oc_pin = oc_pin;
pei_data->usb3_ports[port].fixed_eq = fixed_eq;
}
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
/* DQ byte map for Samus board */
const u8 dq_map[2][6][2] = {
{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
{ 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } },
{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
{ 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } } };
/* DQS CPU<>DRAM map for Samus board */
const u8 dqs_map[2][8] = {
{ 2, 0, 1, 3, 6, 4, 7, 5 },
{ 2, 1, 0, 3, 6, 5, 4, 7 } };
pei_data->ec_present = 1;
/* One installed DIMM per channel */
pei_data->dimm_channel0_disabled = 2;
pei_data->dimm_channel1_disabled = 2;
memcpy(pei_data->dq_map, dq_map, sizeof(dq_map));
memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map));
/* P0: HOST PORT */
pei_data_usb2_port(pei_data, 0, 0x0080, 1, 0,
USB_PORT_BACK_PANEL);
/* P1: HOST PORT */
pei_data_usb2_port(pei_data, 1, 0x0080, 1, 1,
USB_PORT_BACK_PANEL);
/* P2: RAIDEN */
pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP,
USB_PORT_BACK_PANEL);
/* P3: SD CARD */
pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP,
USB_PORT_INTERNAL);
/* P4: RAIDEN */
pei_data_usb2_port(pei_data, 4, 0x0080, 1, USB_OC_PIN_SKIP,
USB_PORT_BACK_PANEL);
/* P5: WWAN (Disabled) */
pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP,
USB_PORT_SKIP);
/* P6: CAMERA */
pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP,
USB_PORT_INTERNAL);
/* P7: BT */
pei_data_usb2_port(pei_data, 7, 0x0040, 1, USB_OC_PIN_SKIP,
USB_PORT_INTERNAL);
/* P1: HOST PORT */
pei_data_usb3_port(pei_data, 0, 1, 0, 0);
/* P2: HOST PORT */
pei_data_usb3_port(pei_data, 1, 1, 1, 0);
/* P3: RAIDEN */
pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0);
/* P4: RAIDEN */
pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0);
}
static unsigned long get_top_of_ram(struct udevice *dev)
{
/*
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或