Merge git://git.denx.de/u-boot-nand-flash

README

@@ -3483,9 +3483,6 @@ FIT uImage format:
 		Adds the MTD partitioning infrastructure from the Linux
 		kernel. Needed for UBI support.
 
-		CONFIG_MTD_NAND_VERIFY_WRITE
-		verify if the written data is correct reread.
-
 - UBI support
 		CONFIG_CMD_UBI
 

board/prodrive/alpr/nand.c

@@ -93,19 +93,6 @@ static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	}
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		if (buf[i] != readb(&(alpr_ndfc->data)))
-			return i;
-
-	return 0;
-}
-#endif
-
 static int alpr_nand_dev_ready(struct mtd_info *mtd)
 {
 	/*
@@ -130,9 +117,6 @@ int board_nand_init(struct nand_chip *nand)
 	nand->read_byte  = alpr_nand_read_byte;
 	nand->write_buf  = alpr_nand_write_buf;
 	nand->read_buf   = alpr_nand_read_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	nand->verify_buf = alpr_nand_verify_buf;
-#endif
 	nand->dev_ready  = alpr_nand_dev_ready;
 
 	return 0;

board/socrates/nand.c

@@ -18,9 +18,6 @@ static void sc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
 static u_char sc_nand_read_byte(struct mtd_info *mtd);
 static u16 sc_nand_read_word(struct mtd_info *mtd);
 static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
-#endif
 static int sc_nand_device_ready(struct mtd_info *mtdinfo);
 
 #define FPGA_NAND_CMD_MASK		(0x7 << 28)
@@ -102,25 +99,6 @@ static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	}
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/**
- * sc_nand_verify_buf -  Verify chip data against buffer
- * @mtd:	MTD device structure
- * @buf:	buffer containing the data to compare
- * @len:	number of bytes to compare
- */
-static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		if (buf[i] != sc_nand_read_byte(mtd));
-			return -EFAULT;
-	}
-	return 0;
-}
-#endif
-
 /**
  * sc_nand_device_ready - Check the NAND device is ready for next command.
  * @mtd:	MTD device structure
@@ -178,9 +156,6 @@ int board_nand_init(struct nand_chip *nand)
 	nand->read_word = sc_nand_read_word;
 	nand->write_buf = sc_nand_write_buf;
 	nand->read_buf = sc_nand_read_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	nand->verify_buf = sc_nand_verify_buf;
-#endif
 
 	return 0;
 }

common/cmd_nand.c

@@ -419,10 +419,13 @@ static int raw_access(nand_info_t *nand, ulong addr, loff_t off, ulong count,
 			.mode = MTD_OPS_RAW
 		};
 
-		if (read)
+		if (read) {
 			ret = mtd_read_oob(nand, off, &ops);
-		else
+		} else {
 			ret = mtd_write_oob(nand, off, &ops);
+			if (!ret)
+				ret = nand_verify_page_oob(nand, &ops, off);
+		}
 
 		if (ret) {
 			printf("%s: error at offset %llx, ret %d\n",
@@ -690,7 +693,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			else
 				ret = nand_write_skip_bad(nand, off, &rwsize,
 							  NULL, maxsize,
-							  (u_char *)addr, 0);
+							  (u_char *)addr,
+							  WITH_WR_VERIFY);
 #ifdef CONFIG_CMD_NAND_TRIMFFS
 		} else if (!strcmp(s, ".trimffs")) {
 			if (read) {
@@ -699,17 +703,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			}
 			ret = nand_write_skip_bad(nand, off, &rwsize, NULL,
 						maxsize, (u_char *)addr,
-						WITH_DROP_FFS);
-#endif
-#ifdef CONFIG_CMD_NAND_YAFFS
-		} else if (!strcmp(s, ".yaffs")) {
-			if (read) {
-				printf("Unknown nand command suffix '%s'.\n", s);
-				return 1;
-			}
-			ret = nand_write_skip_bad(nand, off, &rwsize, NULL,
-						maxsize, (u_char *)addr,
-						WITH_YAFFS_OOB);
+						WITH_DROP_FFS | WITH_WR_VERIFY);
 #endif
 		} else if (!strcmp(s, ".oob")) {
 			/* out-of-band data */
@@ -852,11 +846,6 @@ static char nand_help_text[] =
 	"    write 'size' bytes starting at offset 'off' from memory address\n"
 	"    'addr', skipping bad blocks and dropping any pages at the end\n"
 	"    of eraseblocks that contain only 0xFF\n"
-#endif
-#ifdef CONFIG_CMD_NAND_YAFFS
-	"nand write.yaffs - addr off|partition size\n"
-	"    write 'size' bytes starting at offset 'off' with yaffs format\n"
-	"    from memory address 'addr', skipping bad blocks.\n"
 #endif
 	"nand erase[.spread] [clean] off size - erase 'size' bytes "
 	"from offset 'off'\n"

doc/README.nand

@@ -99,12 +99,6 @@ Configuration Options:
    CONFIG_CMD_NAND_TORTURE
       Enables the torture command (see description of this command below).
 
-   CONFIG_MTD_NAND_ECC_JFFS2
-      Define this if you want the Error Correction Code information in
-      the out-of-band data to be formatted to match the JFFS2 file system.
-      CONFIG_MTD_NAND_ECC_YAFFS would be another useful choice for
-      someone to implement.
-
    CONFIG_SYS_MAX_NAND_DEVICE
       The maximum number of NAND devices you want to support.
 
@@ -312,12 +306,6 @@ Platform specific options
 NOTE:
 =====
 
-The current NAND implementation is based on what is in recent
-Linux kernels.  The old legacy implementation has been removed.
-
-If you have board code which used CONFIG_NAND_LEGACY, you'll need
-to convert to the current NAND interface for it to continue to work.
-
 The Disk On Chip driver is currently broken and has been for some time.
 There is a driver in drivers/mtd/nand, taken from Linux, that works with
 the current NAND system but has not yet been adapted to the u-boot

drivers/dfu/dfu_nand.c

@@ -64,7 +64,7 @@ static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu,
 			return ret;
 		/* then write */
 		ret = nand_write_skip_bad(nand, start, &count, &actual,
-				lim, buf, 0);
+				lim, buf, WITH_WR_VERIFY);
 	}
 
 	if (ret != 0) {

drivers/mtd/nand/davinci_nand.c

@@ -405,18 +405,6 @@ static int nand_davinci_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 		goto err;
 	}
 
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-	/* Send command to read back the data */
-	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-
-	if (chip->verify_buf(mtd, buf, mtd->writesize)) {
-		ret = -EIO;
-		goto err;
-	}
-
-	/* Make sure the next page prog is preceded by a status read */
-	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-#endif
 err:
 	/* restore ECC layout */
 	if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) {

drivers/mtd/nand/fsl_elbc_nand.c

@@ -561,41 +561,6 @@ static void fsl_elbc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 		       len, avail);
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/*
- * Verify buffer against the FCM Controller Data Buffer
- */
-static int fsl_elbc_verify_buf(struct mtd_info *mtd,
-			       const u_char *buf, int len)
-{
-	struct nand_chip *chip = mtd->priv;
-	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	int i;
-
-	if (len < 0) {
-		printf("write_buf of %d bytes", len);
-		return -EINVAL;
-	}
-
-	if ((unsigned int)len > ctrl->read_bytes - ctrl->index) {
-		printf("verify_buf beyond end of buffer "
-		       "(%d requested, %u available)\n",
-		       len, ctrl->read_bytes - ctrl->index);
-
-		ctrl->index = ctrl->read_bytes;
-		return -EINVAL;
-	}
-
-	for (i = 0; i < len; i++)
-		if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i])
-			break;
-
-	ctrl->index += len;
-	return i == len && ctrl->status == LTESR_CC ? 0 : -EIO;
-}
-#endif
-
 /* This function is called after Program and Erase Operations to
  * check for success or failure.
  */
@@ -727,9 +692,6 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
 	nand->read_byte = fsl_elbc_read_byte;
 	nand->write_buf = fsl_elbc_write_buf;
 	nand->read_buf = fsl_elbc_read_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	nand->verify_buf = fsl_elbc_verify_buf;
-#endif
 	nand->select_chip = fsl_elbc_select_chip;
 	nand->cmdfunc = fsl_elbc_cmdfunc;
 	nand->waitfunc = fsl_elbc_wait;

drivers/mtd/nand/fsl_ifc_nand.c

@@ -683,41 +683,6 @@ static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 		       __func__, len, avail);
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/*
- * Verify buffer against the IFC Controller Data Buffer
- */
-static int fsl_ifc_verify_buf(struct mtd_info *mtd,
-			       const u_char *buf, int len)
-{
-	struct nand_chip *chip = mtd->priv;
-	struct fsl_ifc_mtd *priv = chip->priv;
-	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
-	int i;
-
-	if (len < 0) {
-		printf("%s of %d bytes", __func__, len);
-		return -EINVAL;
-	}
-
-	if ((unsigned int)len > ctrl->read_bytes - ctrl->index) {
-		printf("%s beyond end of buffer "
-		       "(%d requested, %u available)\n",
-		       __func__, len, ctrl->read_bytes - ctrl->index);
-
-		ctrl->index = ctrl->read_bytes;
-		return -EINVAL;
-	}
-
-	for (i = 0; i < len; i++)
-		if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i])
-			break;
-
-	ctrl->index += len;
-	return i == len && ctrl->status == IFC_NAND_EVTER_STAT_OPC ? 0 : -EIO;
-}
-#endif
-
 /* This function is called after Program and Erase Operations to
  * check for success or failure.
  */
@@ -940,9 +905,6 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
 
 	nand->write_buf = fsl_ifc_write_buf;
 	nand->read_buf = fsl_ifc_read_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	nand->verify_buf = fsl_ifc_verify_buf;
-#endif
 	nand->select_chip = fsl_ifc_select_chip;
 	nand->cmdfunc = fsl_ifc_cmdfunc;
 	nand->waitfunc = fsl_ifc_wait;

drivers/mtd/nand/fsl_upm.c

@@ -153,21 +153,6 @@ static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 		buf[i] = in_8(chip->IO_ADDR_R);
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-static int upm_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-	struct nand_chip *chip = mtd->priv;
-
-	for (i = 0; i < len; i++) {
-		if (buf[i] != in_8(chip->IO_ADDR_R))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-#endif
-
 static int nand_dev_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
@@ -193,9 +178,6 @@ int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
 	chip->read_byte = upm_nand_read_byte;
 	chip->read_buf = upm_nand_read_buf;
 	chip->write_buf = upm_nand_write_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	chip->verify_buf = upm_nand_verify_buf;
-#endif
 	if (fun->dev_ready)
 		chip->dev_ready = nand_dev_ready;
 

drivers/mtd/nand/mpc5121_nfc.c

@@ -459,29 +459,6 @@ static void mpc5121_nfc_write_buf(struct mtd_info *mtd,
 	mpc5121_nfc_buf_copy(mtd, (u_char *) buf, len, 1);
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/* Compare buffer with NAND flash */
-static int mpc5121_nfc_verify_buf(struct mtd_info *mtd,
-				  const u_char * buf, int len)
-{
-	u_char tmp[256];
-	uint bsize;
-
-	while (len) {
-		bsize = min(len, 256);
-		mpc5121_nfc_read_buf(mtd, tmp, bsize);
-
-		if (memcmp(buf, tmp, bsize))
-			return 1;
-
-		buf += bsize;
-		len -= bsize;
-	}
-
-	return 0;
-}
-#endif
-
 /* Read byte from NFC buffers */
 static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd)
 {
@@ -609,9 +586,6 @@ int board_nand_init(struct nand_chip *chip)
 	chip->read_word = mpc5121_nfc_read_word;
 	chip->read_buf = mpc5121_nfc_read_buf;
 	chip->write_buf = mpc5121_nfc_write_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	chip->verify_buf = mpc5121_nfc_verify_buf;
-#endif
 	chip->select_chip = mpc5121_nfc_select_chip;
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 	chip->ecc.mode = NAND_ECC_SOFT;

drivers/mtd/nand/mxc_nand.c

@@ -949,34 +949,6 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	host->col_addr = col;
 }
 
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/*
- * Used by the upper layer to verify the data in NAND Flash
- * with the data in the buf.
- */
-static int mxc_nand_verify_buf(struct mtd_info *mtd,
-				const u_char *buf, int len)
-{
-	u_char tmp[256];
-	uint bsize;
-
-	while (len) {
-		bsize = min(len, 256);
-		mxc_nand_read_buf(mtd, tmp, bsize);
-
-		if (memcmp(buf, tmp, bsize))
-			return 1;
-
-		buf += bsize;
-		len -= bsize;
-	}
-
-	return 0;
-}
-#endif
-#endif
-
 /*
  * This function is used by upper layer for select and
  * deselect of the NAND chip
@@ -1207,11 +1179,6 @@ int board_nand_init(struct nand_chip *this)
 	this->read_word = mxc_nand_read_word;
 	this->write_buf = mxc_nand_write_buf;
 	this->read_buf = mxc_nand_read_buf;
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	this->verify_buf = mxc_nand_verify_buf;
-#endif
-#endif
 
 	host->regs = (struct mxc_nand_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
 #ifdef MXC_NFC_V3_2

drivers/mtd/nand/mxs_nand.c

@@ -453,7 +453,7 @@ static void mxs_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int length)
 	d->cmd.data =
 		MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
 		MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_DEC_SEM |
-		MXS_DMA_DESC_WAIT4END | (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+		MXS_DMA_DESC_WAIT4END | (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
 
 	d->cmd.address = 0;
 
@@ -510,7 +510,7 @@ static void mxs_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
 	d->cmd.data =
 		MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
 		MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
-		(4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+		(1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
 		(length << MXS_DMA_DESC_BYTES_OFFSET);
 
 	d->cmd.address = (dma_addr_t)nand_info->data_buf;

drivers/mtd/nand/nand_base.c

@@ -361,51 +361,6 @@ void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 	ioread8_rep(chip->IO_ADDR_R, buf, len);
 }
 
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/**
- * nand_verify_buf - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
- *
- * Default verify function for 8bit buswidth.
- */
-static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
-	int i;
-	struct nand_chip *chip = mtd->priv;
-
-	for (i = 0; i < len; i++)
-		if (buf[i] != readb(chip->IO_ADDR_R))
-			return -EFAULT;
-	return 0;
-}
-
-/**
- * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
- *
- * Default verify function for 16bit buswidth.
- */
-static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
-	int i;
-	struct nand_chip *chip = mtd->priv;
-	u16 *p = (u16 *) buf;
-	len >>= 1;
-
-	for (i = 0; i < len; i++)
-		if (p[i] != readw(chip->IO_ADDR_R))
-			return -EFAULT;
-
-	return 0;
-}
-#endif
-#endif
-
 /**
  * nand_write_buf16 - [DEFAULT] write buffer to chip
  * @mtd: MTD device structure
@@ -2435,20 +2390,6 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 		status = chip->waitfunc(mtd, chip);
 	}
 
-
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	/* Send command to read back the data */
-	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-
-	if (chip->verify_buf(mtd, buf, mtd->writesize))
-		return -EIO;
-
-	/* Make sure the next page prog is preceded by a status read */
-	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-#endif
-#endif
-
 	return 0;
 }
 
@@ -3139,12 +3080,6 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 		chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
 	if (!chip->scan_bbt)
 		chip->scan_bbt = nand_default_bbt;
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	if (!chip->verify_buf)
-		chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
-#endif
-#endif
 
 	if (!chip->controller) {
 		chip->controller = &chip->hwcontrol;

drivers/mtd/nand/nand_util.c

@@ -463,6 +463,87 @@ static size_t drop_ffs(const nand_info_t *nand, const u_char *buf,
 }
 #endif
 
+/**
+ * nand_verify_page_oob:
+ *
+ * Verify a page of NAND flash, including the OOB.
+ * Reads page of NAND and verifies the contents and OOB against the
+ * values in ops.
+ *
+ * @param nand		NAND device
+ * @param ops		MTD operations, including data to verify
+ * @param ofs		offset in flash
+ * @return		0 in case of success
+ */
+int nand_verify_page_oob(nand_info_t *nand, struct mtd_oob_ops *ops, loff_t ofs)
+{
+	int rval;
+	struct mtd_oob_ops vops;
+	size_t verlen = nand->writesize + nand->oobsize;
+
+	memcpy(&vops, ops, sizeof(vops));
+
+	vops.datbuf = malloc(verlen);
+
+	if (!vops.datbuf)
+		return -ENOMEM;
+
+	vops.oobbuf = vops.datbuf + nand->writesize;
+
+	rval = mtd_read_oob(nand, ofs, &vops);
+	if (!rval)
+		rval = memcmp(ops->datbuf, vops.datbuf, vops.len);
+	if (!rval)
+		rval = memcmp(ops->oobbuf, vops.oobbuf, vops.ooblen);
+
+	free(vops.datbuf);
+
+	return rval ? -EIO : 0;
+}
+
+/**
+ * nand_verify:
+ *
+ * Verify a region of NAND flash.
+ * Reads NAND in page-sized chunks and verifies the contents against
+ * the contents of a buffer.  The offset into the NAND must be
+ * page-aligned, and the function doesn't handle skipping bad blocks.
+ *
+ * @param nand		NAND device
+ * @param ofs		offset in flash
+ * @param len		buffer length
+ * @param buf		buffer to read from
+ * @return		0 in case of success
+ */
+int nand_verify(nand_info_t *nand, loff_t ofs, size_t len, u_char *buf)
+{
+	int rval = 0;
+	size_t verofs;
+	size_t verlen = nand->writesize;
+	uint8_t *verbuf = malloc(verlen);
+
+	if (!verbuf)
+		return -ENOMEM;
+
+	/* Read the NAND back in page-size groups to limit malloc size */
+	for (verofs = ofs; verofs < ofs + len;
+	     verofs += verlen, buf += verlen) {
+		verlen = min(nand->writesize, (uint32_t)(ofs + len - verofs));
+		rval = nand_read(nand, verofs, &verlen, verbuf);
+		if (!rval || (rval == -EUCLEAN))
+			rval = memcmp(buf, verbuf, verlen);
+
+		if (rval)
+			break;
+	}
+
+	free(verbuf);
+
+	return rval ? -EIO : 0;
+}
+
+
+
 /**
  * nand_write_skip_bad:
  *
@@ -499,24 +580,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 	if (actual)
 		*actual = 0;
 
-#ifdef CONFIG_CMD_NAND_YAFFS
-	if (flags & WITH_YAFFS_OOB) {
-		if (flags & ~WITH_YAFFS_OOB)
-			return -EINVAL;
-
-		int pages;
-		pages = nand->erasesize / nand->writesize;
-		blocksize = (pages * nand->oobsize) + nand->erasesize;
-		if (*length % (nand->writesize + nand->oobsize)) {
-			printf("Attempt to write incomplete page"
-				" in yaffs mode\n");
-			return -EINVAL;
-		}
-	} else
-#endif
-	{
-		blocksize = nand->erasesize;
-	}
+	blocksize = nand->erasesize;
 
 	/*
 	 * nand_write() handles unaligned, partial page writes.
@@ -554,6 +618,10 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 
 	if (!need_skip && !(flags & WITH_DROP_FFS)) {
 		rval = nand_write(nand, offset, length, buffer);
+
+		if ((flags & WITH_WR_VERIFY) && !rval)
+			rval = nand_verify(nand, offset, *length, buffer);
+
 		if (rval == 0)
 			return 0;
 
@@ -581,48 +649,22 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		else
 			write_size = blocksize - block_offset;
 
-#ifdef CONFIG_CMD_NAND_YAFFS
-		if (flags & WITH_YAFFS_OOB) {
-			int page, pages;
-			size_t pagesize = nand->writesize;
-			size_t pagesize_oob = pagesize + nand->oobsize;
-			struct mtd_oob_ops ops;
-
-			ops.len = pagesize;
-			ops.ooblen = nand->oobsize;
-			ops.mode = MTD_OPS_AUTO_OOB;
-			ops.ooboffs = 0;
-
-			pages = write_size / pagesize_oob;
-			for (page = 0; page < pages; page++) {
-				WATCHDOG_RESET();
-
-				ops.datbuf = p_buffer;
-				ops.oobbuf = ops.datbuf + pagesize;
-
-				rval = mtd_write_oob(nand, offset, &ops);
-				if (rval != 0)
-					break;
-
-				offset += pagesize;
-				p_buffer += pagesize_oob;
-			}
-		}
-		else
-#endif
-		{
-			truncated_write_size = write_size;
+		truncated_write_size = write_size;
 #ifdef CONFIG_CMD_NAND_TRIMFFS
-			if (flags & WITH_DROP_FFS)
-				truncated_write_size = drop_ffs(nand, p_buffer,
-						&write_size);
+		if (flags & WITH_DROP_FFS)
+			truncated_write_size = drop_ffs(nand, p_buffer,
+					&write_size);
 #endif
 
-			rval = nand_write(nand, offset, &truncated_write_size,
-					p_buffer);
-			offset += write_size;
-			p_buffer += write_size;
-		}
+		rval = nand_write(nand, offset, &truncated_write_size,
+				p_buffer);
+
+		if ((flags & WITH_WR_VERIFY) && !rval)
+			rval = nand_verify(nand, offset,
+				truncated_write_size, p_buffer);
+
+		offset += write_size;
+		p_buffer += write_size;
 
 		if (rval != 0) {
 			printf("NAND write to offset %llx failed %d\n",

drivers/mtd/nand/ndfc.c

@@ -118,21 +118,6 @@ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len
 		out_be32((u32 *)(base + NDFC_DATA), *p++);
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-	uint32_t *p = (uint32_t *) buf;
-
-	for (; len > 0; len -= 4)
-		if (*p++ != in_be32((u32 *)(base + NDFC_DATA)))
-			return -1;
-
-	return 0;
-}
-#endif
-
 /*
  * Read a byte from the NDFC.
  */
@@ -207,9 +192,6 @@ int board_nand_init(struct nand_chip *nand)
 #endif
 
 	nand->write_buf  = ndfc_write_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	nand->verify_buf = ndfc_verify_buf;
-#endif
 	nand->read_byte = ndfc_read_byte;
 
 	chip++;

drivers/mtd/nand/vf610_nfc.c

@@ -146,6 +146,7 @@ struct vf610_nfc {
 	void __iomem	  *regs;
 	uint               column;
 	int                spareonly;
+	int		   page_sz;
 	int                page;
 	/* Status and ID are in alternate locations. */
 	int                alt_buf;
@@ -329,6 +330,11 @@ static void vf610_nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
 				    ROW_ADDR_SHIFT, page);
 }
 
+static inline void vf610_nfc_transfer_size(void __iomem *regbase, int size)
+{
+	__raw_writel(size, regbase + NFC_SECTOR_SIZE);
+}
+
 /* Send command to NAND chip */
 static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 			      int column, int page)
@@ -342,12 +348,14 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 	switch (command) {
 	case NAND_CMD_PAGEPROG:
 		nfc->page = -1;
+		vf610_nfc_transfer_size(nfc->regs, nfc->page_sz);
 		vf610_nfc_send_commands(nfc->regs, NAND_CMD_SEQIN,
 					command, PROGRAM_PAGE_CMD_CODE);
 		vf610_nfc_addr_cycle(mtd, column, page);
 		break;
 
 	case NAND_CMD_RESET:
+		vf610_nfc_transfer_size(nfc->regs, 0);
 		vf610_nfc_send_command(nfc->regs, command, RESET_CMD_CODE);
 		break;
 	/*
@@ -363,14 +371,15 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 		if (nfc->page == page)
 			return;
 		nfc->page = page;
+		vf610_nfc_transfer_size(nfc->regs, nfc->page_sz);
 		vf610_nfc_send_commands(nfc->regs, NAND_CMD_READ0,
 					NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
 		vf610_nfc_addr_cycle(mtd, column, page);
 		break;
 
 	case NAND_CMD_ERASE1:
-		if (nfc->page == page)
-			nfc->page = -1;
+		nfc->page = -1;
+		vf610_nfc_transfer_size(nfc->regs, 0);
 		vf610_nfc_send_commands(nfc->regs, command,
 					NAND_CMD_ERASE2, ERASE_CMD_CODE);
 		vf610_nfc_addr_cycle(mtd, column, page);
@@ -378,11 +387,13 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 
 	case NAND_CMD_READID:
 		nfc->alt_buf = ALT_BUF_ID;
+		vf610_nfc_transfer_size(nfc->regs, 0);
 		vf610_nfc_send_command(nfc->regs, command, READ_ID_CMD_CODE);
 		break;
 
 	case NAND_CMD_STATUS:
 		nfc->alt_buf = ALT_BUF_STAT;
+		vf610_nfc_transfer_size(nfc->regs, 0);
 		vf610_nfc_send_command(nfc->regs, command,
 				       STATUS_READ_CMD_CODE);
 		break;
@@ -580,7 +591,6 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr)
 	struct nand_chip *chip;
 	struct vf610_nfc *nfc;
 	int err = 0;
-	int page_sz;
 	struct vf610_nfc_config cfg = {
 		.hardware_ecc = 1,
 #ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
@@ -634,9 +644,8 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr)
 	chip->bbt_td = &bbt_main_descr;
 	chip->bbt_md = &bbt_mirror_descr;
 
-	page_sz = PAGE_2K + OOB_64;
-	page_sz += cfg.width == 16 ? 1 : 0;
-	vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz);
+	nfc->page_sz = PAGE_2K + OOB_64;
+	nfc->page_sz += cfg.width == 16 ? 1 : 0;
 
 	/* Set configuration register. */
 	vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT);
@@ -665,16 +674,15 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr)
 
 	chip->ecc.mode = NAND_ECC_SOFT; /* default */
 
-	page_sz = mtd->writesize + mtd->oobsize;
+	nfc->page_sz = mtd->writesize + mtd->oobsize;
 
 	/* Single buffer only, max 256 OOB minus ECC status */
-	if (page_sz > PAGE_2K + 256 - 8) {
+	if (nfc->page_sz > PAGE_2K + 256 - 8) {
 		dev_err(nfc->dev, "Unsupported flash size\n");
 		err = -ENXIO;
 		goto error;
 	}
-	page_sz += cfg.width == 16 ? 1 : 0;
-	vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz);
+	nfc->page_sz += cfg.width == 16 ? 1 : 0;
 
 	if (cfg.hardware_ecc) {
 		if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {

include/configs/B4860QDS.h

@@ -391,7 +391,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

include/configs/BSC9131RDB.h

@@ -198,7 +198,6 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 

include/configs/BSC9132QDS.h

@@ -320,7 +320,6 @@ combinations. this should be removed later
 /* NAND */
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

include/configs/C29XPCIE.h

@@ -234,7 +234,6 @@
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(1024 * 1024)
 

include/configs/M54418TWR.h

@@ -53,7 +53,6 @@
 #define CONFIG_CMD_MISC
 #define CONFIG_CMD_MII
 #undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_NAND_YAFFS
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING

include/configs/MPC8313ERDB.h

@@ -272,7 +272,6 @@
 	"mtdparts=e2800000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384

include/configs/MPC8315ERDB.h

@@ -245,7 +245,6 @@
 	"mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE	1
 #define CONFIG_CMD_NAND			1
 #define CONFIG_NAND_FSL_ELBC		1
 #define CONFIG_SYS_NAND_BLOCK_SIZE	16384

include/configs/MPC837XEMDS.h

@@ -283,7 +283,6 @@
  * NAND Flash on the Local Bus
  */
 #define CONFIG_CMD_NAND		1
-#define CONFIG_MTD_NAND_VERIFY_WRITE	1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_NAND_FSL_ELBC	1
 

include/configs/MPC8536DS.h

@@ -308,7 +308,6 @@
 				CONFIG_SYS_NAND_BASE + 0x80000, \
 				CONFIG_SYS_NAND_BASE + 0xC0000}
 #define CONFIG_SYS_MAX_NAND_DEVICE	4
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND		1
 #define CONFIG_NAND_FSL_ELBC	1
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

include/configs/MPC8569MDS.h

@@ -194,7 +194,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE, }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE	1
 #define CONFIG_CMD_NAND			1
 #define CONFIG_NAND_FSL_ELBC		1
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

include/configs/MPC8572DS.h

@@ -303,7 +303,6 @@
 				CONFIG_SYS_NAND_BASE + 0x80000,\
 				CONFIG_SYS_NAND_BASE + 0xC0000}
 #define CONFIG_SYS_MAX_NAND_DEVICE    4
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND		1
 #define CONFIG_NAND_FSL_ELBC	1
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)

include/configs/P1010RDB.h

@@ -444,7 +444,6 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #if defined(CONFIG_P1010RDB_PA)

include/configs/P1022DS.h

@@ -290,7 +290,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND			1
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(256 * 1024)
 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE

include/configs/P1023RDB.h

@@ -136,7 +136,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

include/configs/P2041RDB.h

@@ -251,7 +251,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 

include/configs/T102xQDS.h

@@ -398,7 +398,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

include/configs/T102xRDB.h

@@ -379,7 +379,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)

include/configs/T1040QDS.h

@@ -308,7 +308,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

include/configs/T104xRDB.h

@@ -341,7 +341,6 @@
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)

include/configs/T208xQDS.h

@@ -357,7 +357,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 

include/configs/T208xRDB.h

@@ -328,7 +328,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
 

include/configs/T4240QDS.h

@@ -281,7 +281,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

include/configs/T4240RDB.h

@@ -467,7 +467,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)

include/configs/VCMA9.h

@@ -62,7 +62,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_YAFFS
 
 #define CONFIG_BOARD_LATE_INIT
 

include/configs/corenet_ds.h

@@ -248,7 +248,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 

include/configs/ethernut5.h

@@ -153,7 +153,6 @@
 
 /* JFFS2 */
 #ifdef CONFIG_CMD_JFFS2
-#define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_JFFS2_CMDLINE
 #define CONFIG_JFFS2_NAND
 #endif

include/configs/ids8313.h

@@ -214,7 +214,6 @@
 #define CONFIG_SYS_NAND_BASE		0xE1000000
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_MAX_CHIPS	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_SYS_NAND_PAGE_SIZE	(2048)
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)

include/configs/km/kmp204x-common.h

@@ -167,7 +167,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 

include/configs/ls1021aqds.h

@@ -251,7 +251,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

include/configs/ls2085a_common.h

@@ -191,7 +191,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

include/configs/p1_p2_rdb_pc.h

@@ -494,7 +494,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #if defined(CONFIG_P1020RDB_PD)
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

include/configs/ve8313.h

@@ -186,7 +186,6 @@
  */
 #define CONFIG_SYS_NAND_BASE		0x61000000
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384

include/configs/xpedite537x.h

@@ -131,7 +131,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE, \
 					 CONFIG_SYS_NAND_BASE2}
 #define CONFIG_SYS_MAX_NAND_DEVICE	2
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_SYS_NAND_QUIET_TEST	/* 2nd NAND flash not always populated */
 #define CONFIG_NAND_FSL_ELBC
 

include/configs/xpedite550x.h

@@ -122,7 +122,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE, \
 					 CONFIG_SYS_NAND_BASE2}
 #define CONFIG_SYS_MAX_NAND_DEVICE	2
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_SYS_NAND_QUIET_TEST	/* 2nd NAND flash not always populated */
 #define CONFIG_NAND_FSL_ELBC
 

include/linux/mtd/nand.h

@@ -678,11 +678,6 @@ struct nand_chip {
 	void (*write_byte)(struct mtd_info *mtd, uint8_t byte);
 	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
 	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-        int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
-#endif
-#endif
 	void (*select_chip)(struct mtd_info *mtd, int chip);
 	int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
 	int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);

include/nand.h

@@ -82,34 +82,8 @@ static inline int nand_erase(nand_info_t *info, loff_t off, size_t size)
  * declarations from nand_util.c
  ****************************************************************************/
 
-struct nand_write_options {
-	u_char *buffer;		/* memory block containing image to write */
-	ulong length;		/* number of bytes to write */
-	ulong offset;		/* start address in NAND */
-	int quiet;		/* don't display progress messages */
-	int autoplace;		/* if true use auto oob layout */
-	int forcejffs2;		/* force jffs2 oob layout */
-	int forceyaffs;		/* force yaffs oob layout */
-	int noecc;		/* write without ecc */
-	int writeoob;		/* image contains oob data */
-	int pad;		/* pad to page size */
-	int blockalign;		/* 1|2|4 set multiple of eraseblocks
-				 * to align to */
-};
-
-typedef struct nand_write_options nand_write_options_t;
 typedef struct mtd_oob_ops mtd_oob_ops_t;
 
-struct nand_read_options {
-	u_char *buffer;		/* memory block in which read image is written*/
-	ulong length;		/* number of bytes to read */
-	ulong offset;		/* start address in NAND */
-	int quiet;		/* don't display progress messages */
-	int readoob;		/* put oob data in image */
-};
-
-typedef struct nand_read_options nand_read_options_t;
-
 struct nand_erase_options {
 	loff_t length;		/* number of bytes to erase */
 	loff_t offset;		/* first address in NAND to erase */
@@ -130,15 +104,16 @@ typedef struct nand_erase_options nand_erase_options_t;
 int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		       size_t *actual, loff_t lim, u_char *buffer);
 
-#define WITH_YAFFS_OOB	(1 << 0) /* whether write with yaffs format. This flag
-				  * is a 'mode' meaning it cannot be mixed with
-				  * other flags */
-#define WITH_DROP_FFS	(1 << 1) /* drop trailing all-0xff pages */
+#define WITH_DROP_FFS	(1 << 0) /* drop trailing all-0xff pages */
+#define WITH_WR_VERIFY	(1 << 1) /* verify data was written correctly */
 
 int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 			size_t *actual, loff_t lim, u_char *buffer, int flags);
 int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts);
 int nand_torture(nand_info_t *nand, loff_t offset);
+int nand_verify_page_oob(nand_info_t *nand, struct mtd_oob_ops *ops,
+			loff_t ofs);
+int nand_verify(nand_info_t *nand, loff_t ofs, size_t len, u_char *buf);
 
 #define NAND_LOCK_STATUS_TIGHT	0x01
 #define NAND_LOCK_STATUS_UNLOCK 0x04