ARM: AM43xx: EMIF: configure self-refresh entry delay

Per a suggestion from the hardware team, program the emif_pwr_mgmt_ctrl
and emif_pwr_mgmt_ctrl_shdw registers within the EMIF to hold the
desired delay in cycles that the EMIF waits without an access to enter
self-refresh, in this case 8192 cycles. With this, code desiring to
enter self refresh only has to toggle one bit to enable it.
Signed-off-by: NDave Gerlach <d-gerlach@ti.com>

arch/arm/cpu/armv7/am33xx/ddr.c

@@ -80,8 +80,8 @@ static void configure_mr(int nr, u32 cs)
  */
 void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
 {
-	writel(0x0, &emif_reg[nr]->emif_pwr_mgmt_ctrl);
-	writel(0x0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw);
+	writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl);
+	writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw);
 	writel(0x1, &emif_reg[nr]->emif_iodft_tlgc);
 	writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);