提交 3aec452e 编写于 作者: M Mingkai Hu 提交者: York Sun

armv8: Enable CPUECTLR.SMPEN for coherency

For A53, data coherency is enabled only when the CPUECTLR.SMPEN bit is
set. The SMPEN bit should be set before enabling the data cache.
If not enabled, the cache is not coherent with other cores and
data corruption could occur.

For A57/A72, SMPEN bit enables the processor to receive instruction
cache and TLB maintenance operations broadcast from other processors
in the cluster. This bit should be set before enabling the caches and
MMU, or performing any cache and TLB maintenance operations.
Signed-off-by: NMingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: NGong Qianyu <Qianyu.Gong@nxp.com>
Signed-off-by: NMateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>
上级 9e0bb4c1
......@@ -3,6 +3,24 @@ if ARM64
config ARMV8_MULTIENTRY
bool "Enable multiple CPUs to enter into U-Boot"
config ARMV8_SET_SMPEN
bool "Enable data coherency with other cores in cluster"
help
Say Y here if there is not any trust firmware to set
CPUECTLR_EL1.SMPEN bit before U-Boot.
For A53, it enables data coherency with other cores in the
cluster, and for A57/A72, it enables receiving of instruction
cache and TLB maintenance operations.
Cortex A53/57/72 cores require CPUECTLR_EL1.SMPEN set even
for single core systems. Unfortunately write access to this
register may be controlled by EL3/EL2 firmware. To be more
precise, by default (if there is EL2/EL3 firmware running)
this register is RO for NS EL1.
This switch can be used to avoid writing to CPUECTLR_EL1,
it can be safely enabled when EL2/EL3 initialized SMPEN bit
or when CPU implementation doesn't include that register.
config ARMV8_SPIN_TABLE
bool "Support spin-table enable method"
depends on ARMV8_MULTIENTRY && OF_LIBFDT
......
......@@ -86,6 +86,17 @@ save_boot_params_ret:
msr cpacr_el1, x0 /* Enable FP/SIMD */
0:
/*
* Enalbe SMPEN bit for coherency.
* This register is not architectural but at the moment
* this bit should be set for A53/A57/A72.
*/
#ifdef CONFIG_ARMV8_SET_SMPEN
mrs x0, S3_1_c15_c2_1 /* cpuactlr_el1 */
orr x0, x0, #0x40
msr S3_1_c15_c2_1, x0
#endif
/* Apply ARM core specific erratas */
bl apply_core_errata
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册