Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 3a55a566 编写于 作者: T Thomas Chou
浏览文件
操作

serial: move nios2-yanu.h into opencores_yanu driver 

The nios2-yanu.h contains hardware registers and bits of
opencores yanu. As there is no other user of this header
, it should be moved into the driver.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
CC: Renato Andreola <renato.andreola@imagos.it>
上级 57cfeb51
隐藏空白更改
内联 并排
Showing with 86 addition and 100 deletion
drivers/serial/opencores_yanu.c
浏览文件 @ 3a55a566
/*
* Altera NiosII YANU serial interface by Imagos
* please see http://www.opencores.org/project,yanu for
* information/downloads
*
* Copyright 2010, Renato Andreola <renato.andreola@imagos.it>
*
* SPDX-License-Identifier: GPL-2.0+
......@@ -7,7 +11,6 @@
#include <common.h>
#include <watchdog.h>
#include <asm/io.h>
#include <nios2-yanu.h>
#include <serial.h>
DECLARE_GLOBAL_DATA_PTR;
......@@ -16,6 +19,88 @@ DECLARE_GLOBAL_DATA_PTR;
/* YANU Imagos serial port */
/*-----------------------------------------------------------------*/
#define YANU_MAX_PRESCALER_N ((1 << 4) - 1) /* 15 */
#define YANU_MAX_PRESCALER_M ((1 << 11) -1) /* 2047 */
#define YANU_FIFO_SIZE (16)
#define YANU_RXFIFO_SIZE (YANU_FIFO_SIZE)
#define YANU_TXFIFO_SIZE (YANU_FIFO_SIZE)
#define YANU_RXFIFO_DLY (10*11)
#define YANU_TXFIFO_THR (10)
#define YANU_DATA_CHAR_MASK (0xFF)
/* data register */
#define YANU_DATA_OFFSET (0) /* data register offset */
#define YANU_CONTROL_OFFSET (4) /* control register offset */
/* interrupt enable */
#define YANU_CONTROL_IE_RRDY (1<<0) /* ie on received character ready */
#define YANU_CONTROL_IE_OE (1<<1) /* ie on rx overrun */
#define YANU_CONTROL_IE_BRK (1<<2) /* ie on break detect */
#define YANU_CONTROL_IE_FE (1<<3) /* ie on framing error */
#define YANU_CONTROL_IE_PE (1<<4) /* ie on parity error */
#define YANU_CONTROL_IE_TRDY (1<<5) /* ie interrupt on tranmitter ready */
/* control bits */
#define YANU_CONTROL_BITS_POS (6) /* bits number pos */
#define YANU_CONTROL_BITS (1<<YANU_CONTROL_BITS_POS) /* number of rx/tx bits per word. 3 bit unsigned integer */
#define YANU_CONTROL_BITS_N (3) /* ... its bit filed length */
#define YANU_CONTROL_PARENA (1<<9) /* enable parity bit transmission/reception */
#define YANU_CONTROL_PAREVEN (1<<10) /* parity even */
#define YANU_CONTROL_STOPS (1<<11) /* number of stop bits */
#define YANU_CONTROL_HHENA (1<<12) /* Harware Handshake enable... */
#define YANU_CONTROL_FORCEBRK (1<<13) /* if set than txd = active (0) */
/* tuning part */
#define YANU_CONTROL_RDYDLY (1<<14) /* delay from "first" before setting rrdy (in bit) */
#define YANU_CONTROL_RDYDLY_N (8) /* ... its bit filed length */
#define YANU_CONTROL_TXTHR (1<<22) /* tx interrupt threshold: the trdy set if txfifo_chars<= txthr (chars) */
#define YANU_CONTROL_TXTHR_N (4) /* ... its bit field length */
#define YANU_BAUD_OFFSET (8) /* baud register offset */
#define YANU_BAUDM (1<<0) /* baud mantissa lsb */
#define YANU_BAUDM_N (12) /* ...its bit filed length */
#define YANU_BAUDE (1<<12) /* baud exponent lsb */
#define YANU_BAUDE_N (4) /* ...its bit field length */
#define YANU_ACTION_OFFSET (12) /* action register... write only */
#define YANU_ACTION_RRRDY (1<<0) /* reset rrdy */
#define YANU_ACTION_ROE (1<<1) /* reset oe */
#define YANU_ACTION_RBRK (1<<2) /* reset brk */
#define YANU_ACTION_RFE (1<<3) /* reset fe */
#define YANU_ACTION_RPE (1<<4) /* reset pe */
#define YANU_ACTION_SRRDY (1<<5) /* set rrdy */
#define YANU_ACTION_SOE (1<<6) /* set oe */
#define YANU_ACTION_SBRK (1<<7) /* set brk */
#define YANU_ACTION_SFE (1<<8) /* set fe */
#define YANU_ACTION_SPE (1<<9) /* set pe */
#define YANU_ACTION_RFIFO_PULL (1<<10) /* pull a char from rx fifo we MUST do it before taking a char */
#define YANU_ACTION_RFIFO_CLEAR (1<<11) /* clear rx fifo */
#define YANU_ACTION_TFIFO_CLEAR (1<<12) /* clear tx fifo */
#define YANU_ACTION_RTRDY (1<<13) /* clear trdy */
#define YANU_ACTION_STRDY (1<<14) /* set trdy */
#define YANU_STATUS_OFFSET (16)
#define YANU_STATUS_RRDY (1<<0) /* rxrdy flag */
#define YANU_STATUS_TRDY (1<<1) /* txrdy flag */
#define YANU_STATUS_OE (1<<2) /* rx overrun error */
#define YANU_STATUS_BRK (1<<3) /* rx break detect flag */
#define YANU_STATUS_FE (1<<4) /* rx framing error flag */
#define YANU_STATUS_PE (1<<5) /* rx parity erro flag */
#define YANU_RFIFO_CHARS_POS (6)
#define YANU_RFIFO_CHARS (1<<RFIFO_CHAR_POS) /* number of chars into rx fifo */
#define YANU_RFIFO_CHARS_N (5) /* ...its bit field length: 32 chars */
#define YANU_TFIFO_CHARS_POS (11)
#define YANU_TFIFO_CHARS (1<<TFIFO_CHAR_POS) /* number of chars into tx fifo */
#define YANU_TFIFO_CHARS_N (5) /* ...its bit field length: 32 chars */
typedef volatile struct {
volatile unsigned data;
volatile unsigned control; /* control register (RW) 32-bit */
volatile unsigned baud; /* baud/prescaler register (RW) 32-bit */
volatile unsigned action; /* action register (W) 32-bit */
volatile unsigned status; /* status register (R) 32-bit */
volatile unsigned magic; /* magic register (R) 32-bit */
} yanu_uart_t;
static yanu_uart_t *uart = (yanu_uart_t *)CONFIG_SYS_NIOS_CONSOLE;
static void oc_serial_setbrg(void)
......
include/nios2-yanu.h 已删除 100644 → 0
浏览文件 @ 57cfeb51
/*
* (C) Copyright 2006, Imagos S.a.s <www.imagos.it>
* Renato Andreola <renato.andreola@imagos.it>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*************************************************************************
* Altera NiosII YANU serial interface by Imagos
* please see http://www.opencores.org/project,yanu for
* information/downloads
************************************************************************/
#ifndef __NIOS2_YANU_H__
#define __NIOS2_YANU_H__
#define YANU_MAX_PRESCALER_N ((1 << 4) - 1) /* 15 */
#define YANU_MAX_PRESCALER_M ((1 << 11) -1) /* 2047 */
#define YANU_FIFO_SIZE (16)
#define YANU_RXFIFO_SIZE (YANU_FIFO_SIZE)
#define YANU_TXFIFO_SIZE (YANU_FIFO_SIZE)
#define YANU_RXFIFO_DLY (10*11)
#define YANU_TXFIFO_THR (10)
#define YANU_DATA_CHAR_MASK (0xFF)
/* data register */
#define YANU_DATA_OFFSET (0) /* data register offset */
#define YANU_CONTROL_OFFSET (4) /* control register offset */
/* interrupt enable */
#define YANU_CONTROL_IE_RRDY (1<<0) /* ie on received character ready */
#define YANU_CONTROL_IE_OE (1<<1) /* ie on rx overrun */
#define YANU_CONTROL_IE_BRK (1<<2) /* ie on break detect */
#define YANU_CONTROL_IE_FE (1<<3) /* ie on framing error */
#define YANU_CONTROL_IE_PE (1<<4) /* ie on parity error */
#define YANU_CONTROL_IE_TRDY (1<<5) /* ie interrupt on tranmitter ready */
/* control bits */
#define YANU_CONTROL_BITS_POS (6) /* bits number pos */
#define YANU_CONTROL_BITS (1<<YANU_CONTROL_BITS_POS) /* number of rx/tx bits per word. 3 bit unsigned integer */
#define YANU_CONTROL_BITS_N (3) /* ... its bit filed length */
#define YANU_CONTROL_PARENA (1<<9) /* enable parity bit transmission/reception */
#define YANU_CONTROL_PAREVEN (1<<10) /* parity even */
#define YANU_CONTROL_STOPS (1<<11) /* number of stop bits */
#define YANU_CONTROL_HHENA (1<<12) /* Harware Handshake enable... */
#define YANU_CONTROL_FORCEBRK (1<<13) /* if set than txd = active (0) */
/* tuning part */
#define YANU_CONTROL_RDYDLY (1<<14) /* delay from "first" before setting rrdy (in bit) */
#define YANU_CONTROL_RDYDLY_N (8) /* ... its bit filed length */
#define YANU_CONTROL_TXTHR (1<<22) /* tx interrupt threshold: the trdy set if txfifo_chars<= txthr (chars) */
#define YANU_CONTROL_TXTHR_N (4) /* ... its bit field length */
#define YANU_BAUD_OFFSET (8) /* baud register offset */
#define YANU_BAUDM (1<<0) /* baud mantissa lsb */
#define YANU_BAUDM_N (12) /* ...its bit filed length */
#define YANU_BAUDE (1<<12) /* baud exponent lsb */
#define YANU_BAUDE_N (4) /* ...its bit field length */
#define YANU_ACTION_OFFSET (12) /* action register... write only */
#define YANU_ACTION_RRRDY (1<<0) /* reset rrdy */
#define YANU_ACTION_ROE (1<<1) /* reset oe */
#define YANU_ACTION_RBRK (1<<2) /* reset brk */
#define YANU_ACTION_RFE (1<<3) /* reset fe */
#define YANU_ACTION_RPE (1<<4) /* reset pe */
#define YANU_ACTION_SRRDY (1<<5) /* set rrdy */
#define YANU_ACTION_SOE (1<<6) /* set oe */
#define YANU_ACTION_SBRK (1<<7) /* set brk */
#define YANU_ACTION_SFE (1<<8) /* set fe */
#define YANU_ACTION_SPE (1<<9) /* set pe */
#define YANU_ACTION_RFIFO_PULL (1<<10) /* pull a char from rx fifo we MUST do it before taking a char */
#define YANU_ACTION_RFIFO_CLEAR (1<<11) /* clear rx fifo */
#define YANU_ACTION_TFIFO_CLEAR (1<<12) /* clear tx fifo */
#define YANU_ACTION_RTRDY (1<<13) /* clear trdy */
#define YANU_ACTION_STRDY (1<<14) /* set trdy */
#define YANU_STATUS_OFFSET (16)
#define YANU_STATUS_RRDY (1<<0) /* rxrdy flag */
#define YANU_STATUS_TRDY (1<<1) /* txrdy flag */
#define YANU_STATUS_OE (1<<2) /* rx overrun error */
#define YANU_STATUS_BRK (1<<3) /* rx break detect flag */
#define YANU_STATUS_FE (1<<4) /* rx framing error flag */
#define YANU_STATUS_PE (1<<5) /* rx parity erro flag */
#define YANU_RFIFO_CHARS_POS (6)
#define YANU_RFIFO_CHARS (1<<RFIFO_CHAR_POS) /* number of chars into rx fifo */
#define YANU_RFIFO_CHARS_N (5) /* ...its bit field length: 32 chars */
#define YANU_TFIFO_CHARS_POS (11)
#define YANU_TFIFO_CHARS (1<<TFIFO_CHAR_POS) /* number of chars into tx fifo */
#define YANU_TFIFO_CHARS_N (5) /* ...its bit field length: 32 chars */
typedef volatile struct yanu_uart_t {
volatile unsigned data;
volatile unsigned control; /* control register (RW) 32-bit */
volatile unsigned baud; /* baud/prescaler register (RW) 32-bit */
volatile unsigned action; /* action register (W) 32-bit */
volatile unsigned status; /* status register (R) 32-bit */
volatile unsigned magic; /* magic register (R) 32-bit */
} yanu_uart_t;
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或