sc_sps_1: Adjust board config to use 'mxs' SoC code

Fix build failure due the move of mx28 code to 'mxs' SoC.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
Acked-by: NStefano Babic <sbabic@denx.de>

board/schulercontrol/sc_sps_1/sc_sps_1.c

@@ -85,8 +85,8 @@ int board_mmc_init(bd_t *bis)
 #ifdef	CONFIG_CMD_NET
 int board_eth_init(bd_t *bis)
 {
-	struct mx28_clkctrl_regs *clkctrl_regs =
-		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
 	int ret;
 
 	ret = cpu_eth_init(bis);

board/schulercontrol/sc_sps_1/spl_boot.c

@@ -156,10 +156,10 @@ const iomux_cfg_t iomux_setup[] = {
 
 void board_init_ll(void)
 {
-	mx28_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup));
+	mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup));
 }
 
-void mx28_adjust_memory_params(uint32_t *dram_vals)
+void mxs_adjust_memory_params(uint32_t *dram_vals)
 {
 	dram_vals[0x74 >> 2] = 0x0f02010a;
 }

boards.cfg

@@ -182,7 +182,7 @@ magnesium                    arm         arm926ejs   imx27lite           logicpd
 apx4devkit                   arm         arm926ejs   apx4devkit          bluegiga       mxs		apx4devkit
 m28evk                       arm         arm926ejs   m28evk              denx           mxs		m28evk
 mx28evk                      arm         arm926ejs   mx28evk             freescale      mxs		mx28evk
-sc_sps_1                     arm         arm926ejs   -                   schulercontrol mx28
+sc_sps_1                     arm         arm926ejs   sc_sps_1            schulercontrol mxs
 nhk8815                      arm         arm926ejs   nhk8815             st             nomadik
 nhk8815_onenand              arm         arm926ejs   nhk8815             st             nomadik       nhk8815:BOOT_ONENAND
 omap5912osk                  arm         arm926ejs   -                   ti             omap

include/configs/sc_sps_1.h

@@ -54,8 +54,8 @@
  */
 #define CONFIG_SPL
 #define CONFIG_SPL_NO_CPU_SUPPORT_CODE
-#define CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mx28"
-#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds"
+#define CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
+#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_GPIO_SUPPORT