ARM: BeagleBoard-x15: Enable i2c5 clocks

On AM57xx evm I2C5 is used to detect the LCD board by reading the
EEPROM present on the bus.
Enable i2c5 clocks to help that.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

arch/arm/cpu/armv7/omap5/hw_data.c

@@ -534,6 +534,9 @@ void enable_basic_clocks(void)
 void enable_basic_uboot_clocks(void)
 {
 	u32 const clk_domains_essential[] = {
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+		(*prcm)->cm_ipu_clkstctrl,
+#endif
 		0
 	};
 
@@ -547,7 +550,11 @@ void enable_basic_uboot_clocks(void)
 		(*prcm)->cm_l4per_i2c2_clkctrl,
 		(*prcm)->cm_l4per_i2c3_clkctrl,
 		(*prcm)->cm_l4per_i2c4_clkctrl,
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+		(*prcm)->cm_ipu_i2c5_clkctrl,
+#else
 		(*prcm)->cm_l4per_i2c5_clkctrl,
+#endif
 		(*prcm)->cm_l3init_hsusbhost_clkctrl,
 		(*prcm)->cm_l3init_fsusb_clkctrl,
 		0

arch/arm/cpu/armv7/omap5/prcm-regs.c

@@ -817,6 +817,10 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_dsp_clkstctrl			= 0x4a005400,
 	.cm_dsp_dsp_clkctrl			= 0x4a005420,
 
+	/* cm IPU */
+	.cm_ipu_clkstctrl			= 0x4a005540,
+	.cm_ipu_i2c5_clkctrl			= 0x4a005578,
+
 	/* prm irqstatus regs */
 	.prm_irqstatus_mpu_2			= 0x4ae06014,
 

arch/arm/include/asm/omap_common.h

@@ -345,6 +345,10 @@ struct prcm_regs {
 	/* GMAC Clk Ctrl */
 	u32 cm_gmac_gmac_clkctrl;
 	u32 cm_gmac_clkstctrl;
+
+	/* IPU */
+	u32 cm_ipu_clkstctrl;
+	u32 cm_ipu_i2c5_clkctrl;
 };
 
 struct omap_sys_ctrl_regs {