ls102xa: fdt: Disable QSPI and DSPI in NOR/NAND/SD boot

As QSPI/DSPI and IFC are pin multiplexed, QSPI and DSPI are
only enabled in QSPI boot, and disabled in other boot modes.
IFC is enabled in NOR/NAND/SD boot, and disabled in QSPI boot.
This patch will add fdt support for the above rules.
Signed-off-by: NAlison Wang <alison.wang@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

arch/arm/cpu/armv7/ls102xa/fdt.c

@@ -150,4 +150,17 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 
 	do_fixup_by_compat_u32(blob, "fsl, ls1021a-flexcan",
 			       "clock-frequency", busclk / 2, 1);
+
+#ifdef CONFIG_QSPI_BOOT
+	off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT,
+					    CONFIG_SYS_IFC_ADDR);
+	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+#else
+	off = fdt_node_offset_by_compat_reg(blob, FSL_QSPI_COMPAT,
+					    QSPI0_BASE_ADDR);
+	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+	off = fdt_node_offset_by_compat_reg(blob, FSL_DSPI_COMPAT,
+					    DSPI1_BASE_ADDR);
+	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+#endif
 }

arch/arm/include/asm/arch-ls102xa/config.h

@@ -102,4 +102,8 @@
 #error SoC not defined
 #endif
 
+#define FSL_IFC_COMPAT		"fsl,ifc"
+#define FSL_QSPI_COMPAT		"fsl,ls1-qspi"
+#define FSL_DSPI_COMPAT		"fsl,vf610-dspi"
+
 #endif /* _ASM_ARMV7_LS102XA_CONFIG_ */