Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOST

Rename this option so that CONFIG_IS_ENABLED can be used with it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

arch/arm/mach-imx/mx6/Kconfig

@@ -312,7 +312,7 @@ config TARGET_MX6DL_MAMOJ
 	select SPL_SEPARATE_BSS if SPL
 	select SPL_SERIAL_SUPPORT if SPL
 	select SPL_USB_GADGET if SPL
-	select SPL_USB_HOST_SUPPORT if SPL
+	select SPL_USB_HOST if SPL
 	select SPL_USB_SDP_SUPPORT if SPL
 	select SPL_WATCHDOG if SPL
 	select SUPPORT_SPL

common/Makefile

@@ -72,7 +72,7 @@ obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
 obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
 
-ifdef CONFIG_SPL_USB_HOST_SUPPORT
+ifdef CONFIG_SPL_USB_HOST
 obj-y += usb.o
 obj-y += usb_hub.o
 obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o

common/spl/Kconfig

@@ -1192,7 +1192,7 @@ config SPL_THERMAL
 	  automatic power-off when the temperature gets too high or low. Other
 	  devices may be discrete but connected on a suitable bus.
 
-config SPL_USB_HOST_SUPPORT
+config SPL_USB_HOST
 	bool "Support USB host drivers"
 	select HAVE_BLOCK_DEVICE
 	help
@@ -1205,7 +1205,7 @@ config SPL_USB_HOST_SUPPORT
 
 config SPL_USB_STORAGE
 	bool "Support loading from USB"
-	depends on SPL_USB_HOST_SUPPORT && !(BLK && !DM_USB)
+	depends on SPL_USB_HOST && !(BLK && !DM_USB)
 	help
 	  Enable support for USB devices in SPL. This allows use of USB
 	  devices such as hard drives and flash drivers for loading U-Boot.

configs/am43xx_evm_defconfig

@@ -23,7 +23,7 @@ CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_NET_SUPPORT=y
 CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
 CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_ETHER=y
 CONFIG_CMD_SPL=y

configs/am43xx_evm_usbhost_boot_defconfig

@@ -19,7 +19,7 @@ CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_STORAGE=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_ETHER=y

configs/am43xx_hs_evm_defconfig

@@ -31,7 +31,7 @@ CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_NET_SUPPORT=y
 CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_ETHER=y
 # CONFIG_CMD_FLASH is not set

configs/am64x_evm_a53_defconfig

@@ -38,7 +38,7 @@ CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_STORAGE=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_DFU=y

configs/am64x_evm_r5_defconfig

@@ -44,7 +44,7 @@ CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_STORAGE=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_DFU=y

configs/am65x_evm_a53_defconfig

@@ -49,7 +49,7 @@ CONFIG_SPL_RAM_SUPPORT=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_STORAGE=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_DFU=y

configs/am65x_evm_r5_usbmsc_defconfig

@@ -34,7 +34,7 @@ CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_STORAGE=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_YMODEM_SUPPORT=y

configs/apalis_imx6_defconfig

@@ -29,7 +29,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_MISC_INIT_R=y
 CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SYS_PROMPT="Apalis iMX6 # "

configs/colibri_imx6_defconfig

@@ -28,7 +28,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_MISC_INIT_R=y
 CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SYS_PROMPT="Colibri iMX6 # "

configs/display5_factory_defconfig

@@ -40,7 +40,7 @@ CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y

configs/ge_b1x5v2_defconfig

@@ -37,7 +37,7 @@ CONFIG_LOG_DEFAULT_LEVEL=4
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_MISC_INIT_R=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_HUSH_PARSER=y

configs/imx6q_logic_defconfig

@@ -33,7 +33,7 @@ CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y

configs/imx7_cm_defconfig

@@ -25,7 +25,7 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="ask"
 # CONFIG_BOARD_EARLY_INIT_F is not set
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 # CONFIG_CMD_BOOTD is not set

configs/mx6memcal_defconfig

@@ -15,7 +15,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL"
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_BOOTD is not set

configs/mx6sabreauto_defconfig

@@ -32,7 +32,7 @@ CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y

configs/mx6sabresd_defconfig

@@ -29,7 +29,7 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_FIT_IMAGE_TINY=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y

configs/mx6ul_14x14_evk_defconfig

@@ -25,7 +25,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y

configs/myir_mys_6ulx_defconfig

@@ -22,7 +22,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_DMA=y
 CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_CMD_MEMTEST=y

configs/phycore_pcl063_defconfig

@@ -19,7 +19,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DM=y

configs/phycore_pcl063_ull_defconfig

@@ -18,7 +18,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y

configs/pico-dwarf-imx6ul_defconfig

@@ -23,7 +23,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-dwarf.dtb"
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_CMD_BOOTMENU=y

configs/pico-dwarf-imx7d_defconfig

@@ -20,7 +20,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx7d-pico-dwarf.dtb"
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 # CONFIG_CMD_BOOTD is not set

configs/pico-hobbit-imx6ul_defconfig

@@ -24,7 +24,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-hobbit.dtb"
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_CMD_BOOTMENU=y

configs/pico-hobbit-imx7d_defconfig

@@ -20,7 +20,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx7d-pico-hobbit.dtb"
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 # CONFIG_CMD_BOOTD is not set

configs/pico-imx6_defconfig

@@ -28,7 +28,7 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_FS_EXT4=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y

configs/pico-imx6ul_defconfig

@@ -24,7 +24,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="ask"
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_CMD_BOOTMENU=y

configs/pico-imx7d_bl33_defconfig

@@ -19,7 +19,7 @@ CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_HUSH_PARSER=y

configs/pico-imx7d_defconfig

@@ -20,7 +20,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="ask"
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 # CONFIG_CMD_BOOTD is not set

configs/pico-nymph-imx7d_defconfig

@@ -20,7 +20,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx7d-pico-dwarf.dtb"
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 # CONFIG_CMD_BOOTD is not set

configs/pico-pi-imx6ul_defconfig

@@ -24,7 +24,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-pi.dtb"
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_CMD_BOOTMENU=y

configs/pico-pi-imx7d_defconfig

@@ -20,7 +20,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx7d-pico-pi.dtb"
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 # CONFIG_CMD_BOOTD is not set

configs/seeed_npi_imx6ull_defconfig

@@ -23,7 +23,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_DMA=y
 CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_CMD_MEMTEST=y

configs/variscite_dart6ul_defconfig

@@ -18,7 +18,7 @@ CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 # CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y

configs/vining_2000_defconfig

@@ -29,7 +29,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y

drivers/Makefile

@@ -58,7 +58,7 @@ obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
 obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
 obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
 obj-$(CONFIG_SPL_WATCHDOG) += watchdog/
-obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
+obj-$(CONFIG_SPL_USB_HOST) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
 obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
 obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/

drivers/usb/cdns3/Kconfig

@@ -41,7 +41,7 @@ config SPL_USB_CDNS3_GADGET
 
 config SPL_USB_CDNS3_HOST
 	bool "Cadence USB3 host controller"
-	depends on USB_XHCI_HCD && SPL_USB_HOST_SUPPORT
+	depends on USB_XHCI_HCD && SPL_USB_HOST
 	help
 	  Say Y here to enable host controller functionality of the
 	  Cadence driver.

drivers/usb/cdns3/core.c

@@ -149,7 +149,7 @@ static int cdns3_core_init_role(struct cdns3 *cdns)
 
 	dr_mode = best_dr_mode;
 
-#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
 	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
 		ret = cdns3_host_init(cdns);
 		if (ret) {
@@ -403,7 +403,7 @@ int cdns3_bind(struct udevice *parent)
 	dr_mode = usb_get_dr_mode(node);
 
 	switch (dr_mode) {
-#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || \
+#if defined(CONFIG_SPL_USB_HOST) || \
 	(!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST))
 	case USB_DR_MODE_HOST:
 		debug("%s: dr_mode: HOST\n", __func__);
@@ -466,7 +466,7 @@ U_BOOT_DRIVER(cdns_usb3_peripheral) = {
 };
 #endif
 
-#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || \
+#if defined(CONFIG_SPL_USB_HOST) || \
 	(!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST))
 static int cdns3_host_probe(struct udevice *dev)
 {

drivers/usb/dwc3/dwc3-generic.c

@@ -163,7 +163,7 @@ U_BOOT_DRIVER(dwc3_generic_peripheral) = {
 };
 #endif
 
-#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || \
+#if defined(CONFIG_SPL_USB_HOST) || \
 	!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)
 static int dwc3_generic_host_probe(struct udevice *dev)
 {
@@ -320,7 +320,7 @@ static int dwc3_glue_bind(struct udevice *parent)
 			driver = "dwc3-generic-peripheral";
 #endif
 			break;
-#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
 		case USB_DR_MODE_HOST:
 			debug("%s: dr_mode: HOST\n", __func__);
 			driver = "dwc3-generic-host";

drivers/usb/mtu3/mtu3_plat.c

@@ -261,7 +261,7 @@ U_BOOT_DRIVER(mtu3_peripheral) = {
 };
 #endif
 
-#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || \
+#if defined(CONFIG_SPL_USB_HOST) || \
 	(!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST))
 static int mtu3_host_probe(struct udevice *dev)
 {
@@ -329,7 +329,7 @@ static int mtu3_glue_bind(struct udevice *parent)
 		break;
 #endif
 
-#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || \
+#if defined(CONFIG_SPL_USB_HOST) || \
 	(!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST))
 	case USB_DR_MODE_HOST:
 		dev_dbg(parent, "%s: dr_mode: host\n", __func__);

include/configs/am43xx_evm.h

@@ -67,7 +67,7 @@
 
 /* SPL USB Support */
 
-#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION		1
 #define CONFIG_USB_XHCI_OMAP
 

tools/buildman/README

@@ -1017,7 +1017,7 @@ For example:
     + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
     + u-boot-spl.cfg: CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1
     + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
-    44: Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig
+    44: Convert CONFIG_SPL_USB_HOST to Kconfig
     ...
 
 This shows that commit 44 enabled three new options for the board