mx23_olinuxino: Change definitions to use spaces instead of tabs

Change all "#define/ifdef<TAB>" sequences into "#define/ifdef<SPACE>".
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

include/configs/mx23_olinuxino.h

@@ -24,57 +24,57 @@
 /*
  * SoC configurations
  */
-#define	CONFIG_MX23				/* i.MX23 SoC */
-#define	CONFIG_MXS_GPIO				/* GPIO control */
-#define	CONFIG_SYS_HZ		1000		/* Ticks per second */
+#define CONFIG_MX23				/* i.MX23 SoC */
+#define CONFIG_MXS_GPIO				/* GPIO control */
+#define CONFIG_SYS_HZ		1000		/* Ticks per second */
 
-#define	CONFIG_MACH_TYPE	4105
+#define CONFIG_MACH_TYPE	4105
 
 #include <asm/arch/regs-base.h>
 
-#define	CONFIG_SYS_NO_FLASH
-#define	CONFIG_BOARD_EARLY_INIT_F
-#define	CONFIG_ARCH_MISC_INIT
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_MISC_INIT
 
 /*
  * SPL
  */
-#define	CONFIG_SPL
-#define	CONFIG_SPL_NO_CPU_SUPPORT_CODE
-#define	CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
-#define	CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
-#define	CONFIG_SPL_LIBCOMMON_SUPPORT
-#define	CONFIG_SPL_LIBGENERIC_SUPPORT
-#define	CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL
+#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
+#define CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
+#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
 
 /*
  * U-Boot Commands
  */
 #include <config_cmd_default.h>
-#define	CONFIG_DISPLAY_CPUINFO
-#define	CONFIG_DOS_PARTITION
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
 
-#define	CONFIG_CMD_CACHE
-#define	CONFIG_CMD_DHCP
-#define	CONFIG_CMD_EXT2
-#define	CONFIG_CMD_FAT
-#define	CONFIG_CMD_GPIO
-#define	CONFIG_CMD_LED
-#define	CONFIG_CMD_MMC
-#define	CONFIG_CMD_NET
-#define	CONFIG_CMD_USB
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_LED
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_USB
 
 /*
  * Memory configurations
  */
-#define	CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
-#define	PHYS_SDRAM_1			0x40000000	/* Base address */
-#define	PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
-#define	CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
-#define	CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
-#define	CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
-#define	CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
-#define	CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
+#define PHYS_SDRAM_1			0x40000000	/* Base address */
+#define PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
+#define CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
+#define CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
+#define CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 /* Point initial SP in SRAM so SPL can use it too. */
 
 #define CONFIG_SYS_INIT_RAM_ADDR	0x00000000
@@ -89,49 +89,49 @@
  * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
  * binary. In case there was more of this mess, 0x100 bytes are skipped.
  */
-#define	CONFIG_SYS_TEXT_BASE		0x40000100
+#define CONFIG_SYS_TEXT_BASE		0x40000100
 
 /*
  * U-Boot general configurations
  */
-#define	CONFIG_SYS_LONGHELP
-#define	CONFIG_SYS_PROMPT	"=> "
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
-#define	CONFIG_SYS_PBSIZE	\
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT	"=> "
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
+#define CONFIG_SYS_PBSIZE	\
 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 						/* Print buffer size */
-#define	CONFIG_SYS_MAXARGS	32		/* Max number of command args */
-#define	CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 						/* Boot argument buffer size */
-#define	CONFIG_VERSION_VARIABLE			/* U-BOOT version */
-#define	CONFIG_AUTO_COMPLETE			/* Command auto complete */
-#define	CONFIG_CMDLINE_EDITING			/* Command history etc */
-#define	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
+#define CONFIG_AUTO_COMPLETE			/* Command auto complete */
+#define CONFIG_CMDLINE_EDITING			/* Command history etc */
+#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Serial Driver
  */
-#define	CONFIG_PL011_SERIAL
-#define	CONFIG_PL011_CLOCK		24000000
-#define	CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
-#define	CONFIG_CONS_INDEX		0
-#define	CONFIG_BAUDRATE			115200	/* Default baud rate */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK		24000000
+#define CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
+#define CONFIG_CONS_INDEX		0
+#define CONFIG_BAUDRATE			115200	/* Default baud rate */
 
 /*
  * Status LED
  */
-#define	CONFIG_STATUS_LED
-#define	CONFIG_GPIO_LED
-#define	CONFIG_BOARD_SPECIFIC_LED
-#define	STATUS_LED_BOOT	0
-#define	STATUS_LED_BIT	MX23_PAD_SSP1_DETECT__GPIO_2_1
-#define	STATUS_LED_STATE	STATUS_LED_ON
-#define	STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
+#define CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_BOOT	0
+#define STATUS_LED_BIT	MX23_PAD_SSP1_DETECT__GPIO_2_1
+#define STATUS_LED_STATE	STATUS_LED_ON
+#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 
 /*
  * MMC Driver
  */
-#ifdef	CONFIG_CMD_MMC
+#ifdef CONFIG_CMD_MMC
 #define CONFIG_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_GENERIC_MMC
@@ -144,41 +144,41 @@
 #define CONFIG_APBH_DMA
 
 /* USB */
-#ifdef	CONFIG_CMD_USB
-#define	CONFIG_USB_EHCI
-#define	CONFIG_USB_EHCI_MXS
-#define	CONFIG_EHCI_MXS_PORT0
-#define	CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define	CONFIG_EHCI_IS_TDI
-#define	CONFIG_USB_STORAGE
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MXS
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
 #endif
 
 /* Ethernet */
-#ifdef	CONFIG_CMD_NET
-#define	CONFIG_USB_HOST_ETHER
-#define	CONFIG_USB_ETHER_SMSC95XX
+#ifdef CONFIG_CMD_NET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
 #endif
 
 /*
  * Boot Linux
  */
-#define	CONFIG_CMDLINE_TAG
-#define	CONFIG_SETUP_MEMORY_TAGS
-#define	CONFIG_BOOTDELAY	3
-#define	CONFIG_BOOTFILE		"uImage"
-#define	CONFIG_LOADADDR		0x42000000
-#define	CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
-#define	CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_LOADADDR		0x42000000
+#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+#define CONFIG_OF_LIBFDT
 
 /*
  * Environment
  */
-#define	CONFIG_ENV_IS_IN_MMC
-#define	CONFIG_ENV_OVERWRITE
-#ifdef	CONFIG_ENV_IS_IN_MMC
-#define	CONFIG_ENV_OFFSET	(256 * 1024)
-#define	CONFIG_ENV_SIZE	(16 * 1024)
-#define	CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OVERWRITE
+#ifdef CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET	(256 * 1024)
+#define CONFIG_ENV_SIZE	(16 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
 #endif
 
 /*