OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work

USB TLL clocks do not support 'explicit_en', only 'hw_auto'
control (R. Sricharan). cm_l3init_hsusbtll_clkctrl has to be
moved to the clk_modules_hw_auto_essential[] array in order
to make the clock work.

This fix is needed (but not sufficient) for USB EHCI operation
in U-Boot.
Signed-off-by: NLubomir Popov <lpopov@mm-sol.com>

arch/arm/cpu/armv7/omap5/hw_data.c

@@ -403,6 +403,7 @@ void enable_basic_uboot_clocks(void)
 	};
 
 	u32 const clk_modules_hw_auto_essential[] = {
+		(*prcm)->cm_l3init_hsusbtll_clkctrl,
 		0
 	};
 
@@ -412,7 +413,6 @@ void enable_basic_uboot_clocks(void)
 		(*prcm)->cm_l4per_i2c3_clkctrl,
 		(*prcm)->cm_l4per_i2c4_clkctrl,
 		(*prcm)->cm_l4per_i2c5_clkctrl,
-		(*prcm)->cm_l3init_hsusbtll_clkctrl,
 		(*prcm)->cm_l3init_hsusbhost_clkctrl,
 		(*prcm)->cm_l3init_fsusb_clkctrl,
 		0