Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 2af31afc 编写于 作者: T Tom Rini
浏览文件
操作

Merge branch 'master' of git://git.denx.de/u-boot-socfpga

上级 61819012 3958ef30
隐藏空白更改
内联 并排
Showing with 308 addition and 146 deletion
arch/arm/dts/socfpga_arria10-u-boot.dtsi 0 → 100644
浏览文件 @ 2af31afc
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2014, 2020, Intel Corporation
*/
/ {
chosen {
tick-timer = &timer2;
u-boot,dm-pre-reloc;
};
memory@0 {
u-boot,dm-pre-reloc;
};
soc {
u-boot,dm-pre-reloc;
};
};
&clkmgr {
u-boot,dm-pre-reloc;
clocks {
u-boot,dm-pre-reloc;
};
};
&cb_intosc_hs_div2_clk {
u-boot,dm-pre-reloc;
};
&cb_intosc_ls_clk {
u-boot,dm-pre-reloc;
};
&f2s_free_clk {
u-boot,dm-pre-reloc;
};
&gmac0 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x44 0>;
};
&gmac1 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x48 0>;
};
&gmac2 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
};
&i2c0 {
reset-names = "i2c";
};
&i2c1 {
reset-names = "i2c";
};
&i2c2 {
reset-names = "i2c";
};
&i2c3 {
reset-names = "i2c";
};
&i2c4 {
reset-names = "i2c";
};
&L2 {
u-boot,dm-pre-reloc;
};
&l4_mp_clk {
u-boot,dm-pre-reloc;
};
&l4_sp_clk {
u-boot,dm-pre-reloc;
};
&l4_sys_free_clk {
u-boot,dm-pre-reloc;
};
&main_periph_ref_clk {
u-boot,dm-pre-reloc;
};
&main_pll {
u-boot,dm-pre-reloc;
};
&main_noc_base_clk {
u-boot,dm-pre-reloc;
};
&noc_free_clk {
u-boot,dm-pre-reloc;
};
&osc1 {
u-boot,dm-pre-reloc;
};
&peri_noc_base_clk {
u-boot,dm-pre-reloc;
};
&periph_pll {
u-boot,dm-pre-reloc;
};
&porta {
bank-name = "porta";
};
&portb {
bank-name = "portb";
};
&portc {
bank-name = "portc";
};
&rst {
u-boot,dm-pre-reloc;
};
&sysmgr {
u-boot,dm-pre-reloc;
};
&timer2 {
u-boot,dm-pre-reloc;
};
arch/arm/dts/socfpga_arria10.dtsi
浏览文件 @ 2af31afc
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright Altera Corporation (C) 2014. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
......@@ -21,11 +10,6 @@
#address-cells = <1>;
#size-cells = <1>;
chosen {
tick-timer = &timer2;
u-boot,dm-pre-reloc;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
......@@ -60,7 +44,6 @@
device_type = "soc";
interrupt-parent = <&intc>;
ranges;
u-boot,dm-pre-reloc;
amba {
compatible = "simple-bus";
......@@ -85,6 +68,8 @@
#dma-requests = <32>;
clocks = <&l4_main_clk>;
clock-names = "apb_pclk";
resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
reset-names = "dma", "dma-ocp";
};
};
......@@ -99,35 +84,29 @@
clkmgr: clkmgr@ffd04000 {
compatible = "altr,clk-mgr";
reg = <0xffd04000 0x1000>;
u-boot,dm-pre-reloc;
clocks {
#address-cells = <1>;
#size-cells = <0>;
u-boot,dm-pre-reloc;
cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
u-boot,dm-pre-reloc;
};
cb_intosc_ls_clk: cb_intosc_ls_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
u-boot,dm-pre-reloc;
};
f2s_free_clk: f2s_free_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
u-boot,dm-pre-reloc;
};
osc1: osc1 {
#clock-cells = <0>;
compatible = "fixed-clock";
u-boot,dm-pre-reloc;
};
main_pll: main_pll@40 {
......@@ -138,7 +117,6 @@
clocks = <&osc1>, <&cb_intosc_ls_clk>,
<&f2s_free_clk>;
reg = <0x40>;
u-boot,dm-pre-reloc;
main_mpu_base_clk: main_mpu_base_clk {
#clock-cells = <0>;
......@@ -152,7 +130,6 @@
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_pll>;
div-reg = <0x144 0 11>;
u-boot,dm-pre-reloc;
};
main_emaca_clk: main_emaca_clk@68 {
......@@ -228,7 +205,6 @@
clocks = <&osc1>, <&cb_intosc_ls_clk>,
<&f2s_free_clk>, <&main_periph_ref_clk>;
reg = <0xC0>;
u-boot,dm-pre-reloc;
peri_mpu_base_clk: peri_mpu_base_clk {
#clock-cells = <0>;
......@@ -242,7 +218,6 @@
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&periph_pll>;
div-reg = <0x144 16 11>;
u-boot,dm-pre-reloc;
};
peri_emaca_clk: peri_emaca_clk@e8 {
......@@ -318,7 +293,6 @@
<&osc1>, <&cb_intosc_hs_div2_clk>,
<&f2s_free_clk>;
reg = <0x64>;
u-boot,dm-pre-reloc;
};
s2f_user1_free_clk: s2f_user1_free_clk@104 {
......@@ -345,7 +319,6 @@
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&noc_free_clk>;
fixed-divider = <4>;
u-boot,dm-pre-reloc;
};
l4_main_clk: l4_main_clk {
......@@ -395,13 +368,28 @@
clk-gate = <0xC8 11>;
};
nand_clk: nand_clk {
nand_x_clk: nand_x_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-gate-clk";
clocks = <&l4_mp_clk>;
clk-gate = <0xC8 10>;
};
nand_ecc_clk: nand_ecc_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-gate-clk";
clocks = <&nand_x_clk>;
clk-gate = <0xC8 10>;
};
nand_clk: nand_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-gate-clk";
clocks = <&nand_x_clk>;
fixed-divider = <4>;
clk-gate = <0xC8 10>;
};
spi_m_clk: spi_m_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-gate-clk";
......@@ -432,7 +420,7 @@
};
gmac0: ethernet@ff800000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x44 0>;
reg = <0xff800000 0x2000>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
......@@ -452,8 +440,8 @@
};
gmac1: ethernet@ff802000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x48 0>;
compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x48 8>;
reg = <0xff802000 0x2000>;
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
......@@ -472,8 +460,8 @@
};
gmac2: ethernet@ff804000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x4C 16>;
reg = <0xff804000 0x2000>;
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
......@@ -496,11 +484,11 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02900 0x100>;
resets = <&rst GPIO0_RESET>;
status = "disabled";
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
bank-name = "porta";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <29>;
......@@ -516,11 +504,11 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02a00 0x100>;
resets = <&rst GPIO1_RESET>;
status = "disabled";
portb: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
bank-name = "portb";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <29>;
......@@ -536,11 +524,11 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02b00 0x100>;
resets = <&rst GPIO2_RESET>;
status = "disabled";
portc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
bank-name = "portc";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <27>;
......@@ -568,7 +556,6 @@
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
resets = <&rst I2C0_RESET>;
reset-names = "i2c";
status = "disabled";
};
......@@ -580,7 +567,6 @@
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
resets = <&rst I2C1_RESET>;
reset-names = "i2c";
status = "disabled";
};
......@@ -592,7 +578,6 @@
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
resets = <&rst I2C2_RESET>;
reset-names = "i2c";
status = "disabled";
};
......@@ -604,7 +589,6 @@
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
resets = <&rst I2C3_RESET>;
reset-names = "i2c";
status = "disabled";
};
......@@ -616,7 +600,19 @@
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
resets = <&rst I2C4_RESET>;
reset-names = "i2c";
status = "disabled";
};
spi0: spi@ffda4000 {
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xffda4000 0x100>;
interrupts = <0 101 4>;
num-cs = <4>;
/*32bit_access;*/
clocks = <&spi_m_clk>;
resets = <&rst SPIM0_RESET>;
status = "disabled";
};
......@@ -626,16 +622,16 @@
#size-cells = <0>;
reg = <0xffda5000 0x100>;
interrupts = <0 102 4>;
num-chipselect = <4>;
bus-num = <0>;
num-cs = <4>;
/*32bit_access;*/
tx-dma-channel = <&pdma 16>;
rx-dma-channel = <&pdma 17>;
clocks = <&spi_m_clk>;
resets = <&rst SPIM1_RESET>;
status = "disabled";
};
sdr: sdr@ffc25000 {
sdr: sdr@ffcfb100 {
compatible = "altr,sdr-ctl", "syscon";
reg = <0xffcfb100 0x80>;
};
......@@ -666,14 +662,14 @@
nand: nand@ffb90000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand";
reg = <0xffb90000 0x20>,
<0xffb80000 0x1000>;
#size-cells = <0>;
compatible = "altr,socfpga-denali-nand";
reg = <0xffb90000 0x72000>,
<0xffb80000 0x10000>;
reg-names = "nand_data", "denali_reg";
interrupts = <0 99 4>;
dma-mask = <0xffffffff>;
clocks = <&nand_clk>;
clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
clock-names = "nand", "nand_x", "ecc";
resets = <&rst NAND_RESET>;
status = "disabled";
};
......@@ -759,6 +755,8 @@
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
clocks = <&qspi_clk>;
resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
reset-names = "qspi", "qspi-ocp";
status = "disabled";
};
......@@ -767,7 +765,6 @@
compatible = "altr,rst-mgr";
reg = <0xffd05000 0x100>;
altr,modrst-offset = <0x20>;
u-boot,dm-pre-reloc;
};
scu: snoop-control-unit@ffffc000 {
......@@ -785,7 +782,7 @@
timer@ffffc600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xffffc600 0x100>;
interrupts = <1 13 0xf04>;
interrupts = <1 13 0xf01>;
clocks = <&mpu_periph_clk>;
};
......@@ -795,6 +792,8 @@
reg = <0xffc02700 0x100>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
resets = <&rst SPTIMER0_RESET>;
reset-names = "timer";
};
timer1: timer1@ffc02800 {
......@@ -803,6 +802,8 @@
reg = <0xffc02800 0x100>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
resets = <&rst SPTIMER1_RESET>;
reset-names = "timer";
};
timer2: timer2@ffd00000 {
......@@ -811,7 +812,8 @@
reg = <0xffd00000 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
u-boot,dm-pre-reloc;
resets = <&rst L4SYSTIMER0_RESET>;
reset-names = "timer";
};
timer3: timer3@ffd00100 {
......@@ -820,6 +822,8 @@
reg = <0xffd01000 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
resets = <&rst L4SYSTIMER1_RESET>;
reset-names = "timer";
};
uart0: serial0@ffc02000 {
......@@ -881,6 +885,7 @@
reg = <0xffd00200 0x100>;
interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sys_free_clk>;
resets = <&rst L4WD0_RESET>;
status = "disabled";
};
......@@ -889,6 +894,7 @@
reg = <0xffd00300 0x100>;
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sys_free_clk>;
resets = <&rst L4WD1_RESET>;
status = "disabled";
};
};
......
arch/arm/dts/socfpga_arria10_socdk-u-boot.dtsi 0 → 100644
浏览文件 @ 2af31afc
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2015, 2020 Intel. All rights reserved.
*/
#include "socfpga_arria10-u-boot.dtsi"
/ {
aliases {
bootargs = "console=ttyS0,115200";
i2c0 = &i2c1;
};
};
&uart1 {
u-boot,dm-pre-reloc;
};
arch/arm/dts/socfpga_arria10_socdk.dtsi
浏览文件 @ 2af31afc
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Altera Corporation <www.altera.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "socfpga_arria10.dtsi"
/ {
......@@ -24,7 +11,6 @@
aliases {
ethernet0 = &gmac0;
serial0 = &uart1;
i2c0 = &i2c1;
};
chosen {
......@@ -36,7 +22,6 @@
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
u-boot,dm-pre-reloc;
};
a10leds {
......@@ -63,8 +48,21 @@
};
};
ref_033v: 033-v-ref {
compatible = "regulator-fixed";
regulator-name = "0.33V";
regulator-min-microvolt = <330000>;
regulator-max-microvolt = <330000>;
};
soc {
u-boot,dm-pre-reloc;
clkmgr@ffd04000 {
clocks {
osc1 {
clock-frequency = <25000000>;
};
};
};
};
};
......@@ -137,6 +135,18 @@
i2c-sda-falling-time-ns = <6000>;
i2c-scl-falling-time-ns = <6000>;
adc@14 {
compatible = "lltc,ltc2497";
reg = <0x14>;
vref-supply = <&ref_033v>;
};
adc@16 {
compatible = "lltc,ltc2497";
reg = <0x16>;
vref-supply = <&ref_033v>;
};
eeprom@51 {
compatible = "atmel,24c32";
reg = <0x51>;
......@@ -155,7 +165,6 @@
};
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
};
......@@ -167,24 +176,3 @@
&watchdog1 {
status = "okay";
};
/* Clock available early */
&main_periph_ref_clk {
u-boot,dm-pre-reloc;
};
&l4_mp_clk {
u-boot,dm-pre-reloc;
};
&l4_sp_clk {
u-boot,dm-pre-reloc;
};
&clkmgr {
u-boot,dm-pre-reloc;
};
&sysmgr {
u-boot,dm-pre-reloc;
};
arch/arm/dts/socfpga_arria10_socdk_sdmmc-u-boot.dtsi 0 → 100644
浏览文件 @ 2af31afc
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2014-2015, 2020 Intel. All rights reserved.
*/
#include "socfpga_arria10_socdk_sdmmc_handoff.dtsi"
#include "socfpga_arria10_handoff_u-boot.dtsi"
#include "socfpga_arria10_socdk-u-boot.dtsi"
/ {
chosen {
firmware-loader = <&fs_loader0>;
};
fs_loader0: fs-loader {
u-boot,dm-pre-reloc;
compatible = "u-boot,fs-loader";
phandlepart = <&mmc 1>;
};
};
&fpga_mgr {
u-boot,dm-pre-reloc;
altr,bitstream = "fit_spl_fpga.itb";
};
&mmc {
u-boot,dm-pre-reloc;
};
/* Clock available early */
&main_sdmmc_clk {
u-boot,dm-pre-reloc;
};
&peri_sdmmc_clk {
u-boot,dm-pre-reloc;
};
&sdmmc_free_clk {
u-boot,dm-pre-reloc;
};
&sdmmc_clk {
u-boot,dm-pre-reloc;
};
arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts
浏览文件 @ 2af31afc
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/dts-v1/;
#include "socfpga_arria10_socdk.dtsi"
#include "socfpga_arria10_socdk_sdmmc_handoff.dtsi"
#include "socfpga_arria10_handoff_u-boot.dtsi"
/ {
chosen {
firmware-loader = <&fs_loader0>;
};
fs_loader0: fs-loader {
u-boot,dm-pre-reloc;
compatible = "u-boot,fs-loader";
phandlepart = <&mmc 1>;
};
};
&fpga_mgr {
u-boot,dm-pre-reloc;
altr,bitstream = "fit_spl_fpga.itb";
};
&mmc {
u-boot,dm-pre-reloc;
status = "okay";
num-slots = <1>;
cap-sd-highspeed;
cap-mmc-highspeed;
broken-cd;
bus-width = <4>;
};
......@@ -57,20 +25,3 @@
<48 IRQ_TYPE_LEVEL_HIGH>;
};
};
/* Clock available early */
&main_sdmmc_clk {
u-boot,dm-pre-reloc;
};
&peri_sdmmc_clk {
u-boot,dm-pre-reloc;
};
&sdmmc_free_clk {
u-boot,dm-pre-reloc;
};
&sdmmc_clk {
u-boot,dm-pre-reloc;
};
arch/arm/dts/socfpga_arria5_secu1.dts
浏览文件 @ 2af31afc
......@@ -31,6 +31,12 @@
spi0 = &spi1;
};
bootcount@0 {
compatible = "u-boot,bootcount-rtc";
rtc = <&rtc>;
offset = <0x9e>;
};
i2c_gpio: i2c@0 {
compatible = "i2c-gpio";
#address-cells = <1>;
......
arch/arm/mach-socfpga/Kconfig
浏览文件 @ 2af31afc
......@@ -46,6 +46,7 @@ config TARGET_SOCFPGA_ARRIA10
bool
select SPL_ALTERA_SDRAM
select SPL_BOARD_INIT if SPL
select SPL_CACHE if SPL
select CLK
select SPL_CLK if SPL
select DM_I2C
......
configs/socfpga_secu1_defconfig
浏览文件 @ 2af31afc
......@@ -48,6 +48,9 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SPL_DM_SEQ_ALIAS=y
# CONFIG_SPL_BLK is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_DM_BOOTCOUNT=y
CONFIG_DM_BOOTCOUNT_RTC=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
......@@ -76,6 +79,8 @@ CONFIG_PHY_GIGE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_DM_RESET=y
CONFIG_DM_RTC=y
CONFIG_RTC_M41T62=y
CONFIG_SPI=y
CONFIG_SPI_MEM=y
CONFIG_DESIGNWARE_SPI=y
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或