armv8: Add workaround for USB erratum A-009798
The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receiver Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: NSriram Dash <sriram.dash@nxp.com> Signed-off-by: NRajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: NSuresh Gupta <suresh.gupta@nxp.com> Signed-off-by: NRan Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: NYork Sun <york.sun@nxp.com>
Showing
想要评论请 注册 或 登录