configs: ls2088a: Enable DM support for ds3231 rtc

Enable related configs on all ls2088aqds boards to support ds3231
rtc DM function.
Signed-off-by: NChuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -197,10 +197,10 @@ config ARCH_LS2080A
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
+	select SYS_I2C_MXC_I2C1 if !TFABOOT
+	select SYS_I2C_MXC_I2C2 if !TFABOOT
+	select SYS_I2C_MXC_I2C3 if !TFABOOT
+	select SYS_I2C_MXC_I2C4 if !TFABOOT
 	imply DISTRO_DEFAULTS
 	imply PANIC_HANG
 

configs/ls2088aqds_tfa_defconfig

@@ -26,7 +26,6 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
 CONFIG_MP=y
 # CONFIG_ISO_PARTITION is not set
 CONFIG_OF_CONTROL=y
@@ -38,6 +37,12 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
@@ -53,6 +58,7 @@ CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y

configs/ls2088ardb_tfa_SECURE_BOOT_defconfig

@@ -2,13 +2,13 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS2080ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SECURE_BOOT=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -29,13 +29,18 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
@@ -54,6 +59,7 @@ CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
 CONFIG_DM_SCSI=y
 CONFIG_CONS_INDEX=2
 CONFIG_SYS_NS16550=y

configs/ls2088ardb_tfa_defconfig

@@ -2,12 +2,12 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS2080ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -28,7 +28,6 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi"
@@ -39,6 +38,12 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
@@ -58,6 +63,7 @@ CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
 CONFIG_DM_SCSI=y
 CONFIG_CONS_INDEX=2
 CONFIG_SYS_NS16550=y