ARM: zynq: Convert dlc20 and zc70x board to DM_I2C

All these board have also eeprom enabled that's why it is also enabled
via defconfig.
There is also no need to have zc70x specific config file that's why also
remove it.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NHeiko Schocher <hs@denx.de>

configs/zynq_dlc20_rev1_0_defconfig

@@ -18,7 +18,6 @@ CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_PROMPT="Zynq> "
 CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_EEPROM=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FPGA_LOADBP=y
@@ -43,8 +42,12 @@ CONFIG_DFU_RAM=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
-CONFIG_SYS_I2C_ZYNQ=y
-CONFIG_ZYNQ_I2C0=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CADENCE=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x0
+CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y

configs/zynq_zc702_defconfig

 CONFIG_ARM=y
-CONFIG_SYS_CONFIG_NAME="zynq_zc70x"
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
 CONFIG_SPL=y
@@ -18,7 +17,6 @@ CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_PROMPT="Zynq> "
 CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_EEPROM=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
@@ -44,10 +42,14 @@ CONFIG_DFU_RAM=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
-CONFIG_SYS_I2C_ZYNQ=y
-CONFIG_ZYNQ_I2C0=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CADENCE=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x0
+CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y

configs/zynq_zc706_defconfig

 CONFIG_ARM=y
-CONFIG_SYS_CONFIG_NAME="zynq_zc70x"
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
 CONFIG_SPL=y
@@ -21,7 +20,6 @@ CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_PROMPT="Zynq> "
 CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_EEPROM=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FPGA_LOADBP=y
@@ -46,8 +44,12 @@ CONFIG_DFU_RAM=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
-CONFIG_SYS_I2C_ZYNQ=y
-CONFIG_ZYNQ_I2C0=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CADENCE=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x0
+CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y

include/configs/zynq-common.h

@@ -102,20 +102,6 @@
 # define DFU_ALT_INFO
 #endif
 
-/* I2C */
-#if defined(CONFIG_SYS_I2C_ZYNQ)
-# define CONFIG_SYS_I2C
-#endif
-
-/* EEPROM */
-#ifdef CONFIG_ZYNQ_EEPROM
-# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-# define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
-# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
-# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
-# define CONFIG_SYS_EEPROM_SIZE			1024 /* Bytes */
-#endif
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 

include/configs/zynq_zc70x.h

-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013 Xilinx, Inc.
- *
- * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards
- * See zynq-common.h for Zynq common configs
- */
-
-#ifndef __CONFIG_ZYNQ_ZC70X_H
-#define __CONFIG_ZYNQ_ZC70X_H
-
-#define CONFIG_ZYNQ_EEPROM
-
-#include <configs/zynq-common.h>
-
-#endif /* __CONFIG_ZYNQ_ZC70X_H */