Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

.mailmap

@@ -21,6 +21,9 @@ Jagan Teki <jagannadha.sutradharudu-teki@xilinx.com>
 Markus Klotzbuecher <mk@denx.de>
 Prabhakar Kushwaha <prabhakar@freescale.com>
 Rajeshwari Shinde <rajeshwari.s@samsung.com>
+Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Ricardo Ribalda <ricardo.ribalda@uam.es>
+Ricardo Ribalda <ricardo.ribalda@gmail.com>
 Sandeep Paulraj <s-paulraj@ti.com>
 Shaohui Xie <Shaohui.Xie@freescale.com>
 Stefan Roese <stroese>

arch/arm/Kconfig

@@ -558,15 +558,15 @@ config ARCH_ZYNQ
 	select CPU_V7
 	select SUPPORT_SPL
 	select OF_CONTROL
-	select SPL_OF_CONTROL
+	select SPL_OF_CONTROL if SPL
 	select DM
 	select DM_ETH
-	select SPL_DM
+	select SPL_DM if SPL
 	select DM_MMC
 	select DM_SPI
 	select DM_SERIAL
 	select DM_SPI_FLASH
-	select SPL_SEPARATE_BSS
+	select SPL_SEPARATE_BSS if SPL
 
 config ARCH_ZYNQMP
 	bool "Support Xilinx ZynqMP Platform"

arch/arm/cpu/armv8/zynqmp/Kconfig

@@ -20,10 +20,6 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "xilinx_zynqmp_ep" if TARGET_ZYNQMP_EP
 
-config SECURE_IOU
-	bool "Configure ZynqMP secure IOU"
-	default n
-
 config ZYNQMP_USB
 	bool "Configure ZynqMP USB"
 

arch/arm/cpu/armv8/zynqmp/clk.c

@@ -21,9 +21,27 @@ unsigned long get_uart_clk(int dev_id)
 		return 48000;
 	case ZYNQMP_CSU_VERSION_EP108:
 		return 25000000;
+	case ZYNQMP_CSU_VERSION_QEMU:
+		return 133000000;
 	}
 
-	return 133000000;
+	return 100000000;
+}
+
+unsigned long zynqmp_get_system_timer_freq(void)
+{
+	u32 ver = zynqmp_get_silicon_version();
+
+	switch (ver) {
+	case ZYNQMP_CSU_VERSION_VELOCE:
+		return 10000;
+	case ZYNQMP_CSU_VERSION_EP108:
+		return 4000000;
+	case ZYNQMP_CSU_VERSION_QEMU:
+		return 50000000;
+	}
+
+	return 100000000;
 }
 
 #ifdef CONFIG_CLOCKS

arch/arm/cpu/armv8/zynqmp/cpu.c

@@ -15,8 +15,22 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static unsigned int zynqmp_get_silicon_version_secure(void)
+{
+	u32 ver;
+
+	ver = readl(&csu_base->version);
+	ver &= ZYNQMP_SILICON_VER_MASK;
+	ver >>= ZYNQMP_SILICON_VER_SHIFT;
+
+	return ver;
+}
+
 unsigned int zynqmp_get_silicon_version(void)
 {
+	if (current_el() == 3)
+		return zynqmp_get_silicon_version_secure();
+
 	gd->cpu_clk = get_tbclk();
 
 	switch (gd->cpu_clk) {
@@ -24,9 +38,11 @@ unsigned int zynqmp_get_silicon_version(void)
 		return ZYNQMP_CSU_VERSION_VELOCE;
 	case 50000000:
 		return ZYNQMP_CSU_VERSION_QEMU;
+	case 4000000:
+		return ZYNQMP_CSU_VERSION_EP108;
 	}
 
-	return ZYNQMP_CSU_VERSION_EP108;
+	return ZYNQMP_CSU_VERSION_SILICON;
 }
 
 #ifndef CONFIG_SYS_DCACHE_OFF

arch/arm/dts/zynq-7000.dtsi

@@ -234,7 +234,7 @@
 			interrupt-parent = <&intc>;
 			interrupts = <0 24 4>;
 			reg = <0xe0100000 0x1000>;
-		} ;
+		};
 
 		sdhci1: sdhci@e0101000 {
 			compatible = "arasan,sdhci-8.9a";
@@ -244,7 +244,7 @@
 			interrupt-parent = <&intc>;
 			interrupts = <0 47 4>;
 			reg = <0xe0101000 0x1000>;
-		} ;
+		};
 
 		slcr: slcr@f8000000 {
 			#address-cells = <1>;
@@ -326,11 +326,11 @@
 
 		scutimer: timer@f8f00600 {
 			interrupt-parent = <&intc>;
-			interrupts = < 1 13 0x301 >;
+			interrupts = <1 13 0x301>;
 			compatible = "arm,cortex-a9-twd-timer";
-			reg = < 0xf8f00600 0x20 >;
+			reg = <0xf8f00600 0x20>;
 			clocks = <&clkc 4>;
-		} ;
+		};
 
 		usb0: usb@e0002000 {
 			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";

arch/arm/dts/zynq-zc770-xm010.dts

@@ -21,9 +21,8 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
-		linux,stdout-path = &uart1;
-		stdout-path = &uart1;
+		bootargs = "root=/dev/ram rw earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {

arch/arm/dts/zynq-zc770-xm011.dts

@@ -18,9 +18,8 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
-		linux,stdout-path = &uart1;
-		stdout-path = &uart1;
+		bootargs = "root=/dev/ram rw earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -34,12 +33,6 @@
 	};
 };
 
-&spi0 {
-	status = "okay";
-	num-cs = <4>;
-	is-decoded-cs = <0>;
-};
-
 &can0 {
 	status = "okay";
 };
@@ -54,6 +47,12 @@
 	};
 };
 
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
 &uart1 {
 	u-boot,dm-pre-reloc;
 	status = "okay";

arch/arm/dts/zynq-zc770-xm012.dts

@@ -20,9 +20,8 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
-		linux,stdout-path = &uart1;
-		stdout-path = &uart1;
+		bootargs = "root=/dev/ram rw earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -31,12 +30,6 @@
 	};
 };
 
-&spi1 {
-	status = "okay";
-	num-cs = <4>;
-	is-decoded-cs = <0>;
-};
-
 &can1 {
 	status = "okay";
 };
@@ -61,6 +54,12 @@
 	};
 };
 
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
 &uart1 {
 	u-boot,dm-pre-reloc;
 	status = "okay";

arch/arm/dts/zynq-zc770-xm013.dts

@@ -20,9 +20,8 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
-		linux,stdout-path = &uart0;
-		stdout-path = &uart0;
+		bootargs = "root=/dev/ram rw earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -31,21 +30,6 @@
 	};
 };
 
-&spi0 {
-	status = "okay";
-	num-cs = <4>;
-	is-decoded-cs = <0>;
-	eeprom: at25@0 {
-		at25,byte-len = <8192>;
-		at25,addr-mode = <2>;
-		at25,page-size = <32>;
-
-		compatible = "atmel,at25";
-		reg = <2>;
-		spi-max-frequency = <1000000>;
-	};
-};
-
 &can1 {
 	status = "okay";
 };
@@ -74,6 +58,21 @@
 	};
 };
 
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	eeprom: at25@0 {
+		at25,byte-len = <8192>;
+		at25,addr-mode = <2>;
+		at25,page-size = <32>;
+
+		compatible = "atmel,at25";
+		reg = <2>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
 &uart0 {
 	u-boot,dm-pre-reloc;
 	status = "okay";

arch/arm/dts/zynqmp-ep108.dts

@@ -41,7 +41,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@0{
+	phy0: phy@0 {
 		reg = <0>;
 		max-speed = <100>;
 	};

arch/arm/dts/zynqmp.dtsi

@@ -520,7 +520,7 @@
 		};
 
 		uart0: serial@ff000000 {
-			compatible = "cdns,uart-r1p8";
+			compatible = "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 21 4>;
@@ -529,7 +529,7 @@
 		};
 
 		uart1: serial@ff010000 {
-			compatible = "cdns,uart-r1p8";
+			compatible = "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 22 4>;
@@ -559,7 +559,7 @@
 			compatible = "cdns,wdt-r1p2";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 52 1>;
+			interrupts = <0 113 1>;
 			reg = <0x0 0xfd4d0000 0x1000>;
 			timeout-sec = <10>;
 		};

arch/arm/include/asm/arch-zynqmp/clk.h

@@ -9,5 +9,6 @@
 #define _ASM_ARCH_CLK_H_
 
 unsigned long get_uart_clk(int dev_id);
+unsigned long zynqmp_get_system_timer_freq(void);
 
 #endif /* _ASM_ARCH_CLK_H_ */

arch/arm/include/asm/arch-zynqmp/hardware.h

@@ -41,11 +41,8 @@ struct crlapb_regs {
 
 #define crlapb_base ((struct crlapb_regs *)ZYNQMP_CRL_APB_BASEADDR)
 
-#if defined(CONFIG_SECURE_IOU)
-#define ZYNQMP_IOU_SCNTR	0xFF260000
-#else
+#define ZYNQMP_IOU_SCNTR_SECURE	0xFF260000
 #define ZYNQMP_IOU_SCNTR	0xFF250000
-#endif
 #define ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN	0x1
 #define ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_HDBG	0x2
 
@@ -57,9 +54,21 @@ struct iou_scntr {
 
 #define iou_scntr ((struct iou_scntr *)ZYNQMP_IOU_SCNTR)
 
+struct iou_scntr_secure {
+	u32 counter_control_register;
+	u32 reserved0[7];
+	u32 base_frequency_id_register;
+};
+
+#define iou_scntr_secure ((struct iou_scntr_secure *)ZYNQMP_IOU_SCNTR_SECURE)
+
 /* Bootmode setting values */
 #define BOOT_MODES_MASK	0x0000000F
-#define SD_MODE		0x00000003
+#define QSPI_MODE_24BIT	0x00000001
+#define QSPI_MODE_32BIT	0x00000002
+#define SD_MODE		0x00000003 /* sd 0 */
+#define SD_MODE1	0x00000005 /* sd 1 */
+#define NAND_MODE	0x00000004
 #define EMMC_MODE	0x00000006
 #define JTAG_MODE	0x00000000
 
@@ -106,9 +115,20 @@ struct apu_regs {
 #define apu_base ((struct apu_regs *)ZYNQMP_APU_BASEADDR)
 
 /* Board version value */
+#define ZYNQMP_CSU_BASEADDR		0xFFCA0000
 #define ZYNQMP_CSU_VERSION_SILICON	0x0
 #define ZYNQMP_CSU_VERSION_EP108	0x1
 #define ZYNQMP_CSU_VERSION_VELOCE	0x2
 #define ZYNQMP_CSU_VERSION_QEMU		0x3
 
+#define ZYNQMP_SILICON_VER_MASK		0xF000
+#define ZYNQMP_SILICON_VER_SHIFT	12
+
+struct csu_regs {
+	u32 reserved0[17];
+	u32 version;
+};
+
+#define csu_base ((struct csu_regs *)ZYNQMP_CSU_BASEADDR)
+
 #endif /* _ASM_ARCH_HARDWARE_H */

arch/arm/mach-zynq/ddrc.c

@@ -42,8 +42,6 @@ void zynq_ddrc_init(void)
 		 */
 		/* cppcheck-suppress nullPointer */
 		memset((void *)0, 0, 1 * 1024 * 1024);
-
-		gd->ram_size /= 2;
 	} else {
 		puts("ECC disabled ");
 	}

arch/microblaze/Kconfig

@@ -13,6 +13,7 @@ config TARGET_MICROBLAZE_GENERIC
 	select SUPPORT_SPL
 	select OF_CONTROL
 	select DM
+	select DM_SERIAL
 
 endchoice
 

arch/microblaze/cpu/Makefile

@@ -7,5 +7,5 @@
 
 extra-y	= start.o
 obj-y	= irq.o
-obj-y	+= cpu.o interrupts.o cache.o exception.o timer.o
+obj-y	+= interrupts.o cache.o exception.o timer.o
 obj-$(CONFIG_SPL_BUILD)	+= spl.o

arch/microblaze/cpu/cpu.c

-/*
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* EMPTY FILE */

arch/microblaze/cpu/start.S

@@ -155,6 +155,10 @@ clear_bss:
 	cmp     r6, r5, r4 /* check if we have reach the end */
 	bnei    r6, 2b
 3:	/* jumping to board_init */
+#ifdef CONFIG_DEBUG_UART
+	bralid	r15, debug_uart_init
+	nop
+#endif
 #ifndef CONFIG_SPL_BUILD
 	or	r5, r0, r0	/* flags - empty */
 	addi    r31, r0, _gd

arch/powerpc/cpu/ppc4xx/Kconfig

@@ -55,12 +55,6 @@ config TARGET_YOSEMITE
 config TARGET_YUCCA
 	bool "Support yucca"
 
-config TARGET_FX12MM
-	bool "Support fx12mm"
-
-config TARGET_V5FX30TEVAL
-	bool "Support v5fx30teval"
-
 config TARGET_CPCI2DP
 	bool "Support CPCI2DP"
 
@@ -115,14 +109,19 @@ config TARGET_PIP405
 config TARGET_XPEDITE1000
 	bool "Support xpedite1000"
 
-config TARGET_ML507
-	bool "Support ml507"
-
 config TARGET_XILINX_PPC405_GENERIC
 	bool "Support xilinx-ppc405-generic"
+	select SUPPORT_SPL
+	select OF_CONTROL
+	select DM
+	select DM_SERIAL
 
 config TARGET_XILINX_PPC440_GENERIC
 	bool "Support xilinx-ppc440-generic"
+	select SUPPORT_SPL
+	select OF_CONTROL
+	select DM
+	select DM_SERIAL
 
 endchoice
 
@@ -139,8 +138,6 @@ source "board/amcc/sequoia/Kconfig"
 source "board/amcc/walnut/Kconfig"
 source "board/amcc/yosemite/Kconfig"
 source "board/amcc/yucca/Kconfig"
-source "board/avnet/fx12mm/Kconfig"
-source "board/avnet/v5fx30teval/Kconfig"
 source "board/esd/cpci2dp/Kconfig"
 source "board/esd/cpci405/Kconfig"
 source "board/esd/plu405/Kconfig"
@@ -158,7 +155,6 @@ source "board/mpl/mip405/Kconfig"
 source "board/mpl/pip405/Kconfig"
 source "board/t3corp/Kconfig"
 source "board/xes/xpedite1000/Kconfig"
-source "board/xilinx/ml507/Kconfig"
 source "board/xilinx/ppc405-generic/Kconfig"
 source "board/xilinx/ppc440-generic/Kconfig"
 

arch/powerpc/cpu/ppc4xx/interrupts.c

@@ -9,7 +9,7 @@
  * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
  *
  * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
- * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  * Work supported by Qtechnology (htpp://qtec.com)
  *
  * SPDX-License-Identifier:	GPL-2.0+

arch/powerpc/cpu/ppc4xx/uic.c

@@ -9,7 +9,7 @@
  * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
  *
  * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
- * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  * Work supported by Qtechnology (htpp://qtec.com)
  *
  * SPDX-License-Identifier:	GPL-2.0+

arch/powerpc/cpu/ppc4xx/xilinx_irq.c

 /*
  * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  * This work has been supported by: QTechnology  http://qtec.com/
  * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
  * SPDX-License-Identifier:	GPL-2.0+

arch/powerpc/dts/Makefile

@@ -3,6 +3,8 @@
 #
 
 dtb-$(CONFIG_TARGET_CANYONLANDS) += arches.dtb canyonlands.dtb glacier.dtb
+dtb-$(CONFIG_TARGET_XILINX_PPC440_GENERIC) += xilinx-ppc440-generic.dtb
+dtb-$(CONFIG_TARGET_XILINX_PPC405_GENERIC) += xilinx-ppc405-generic.dtb
 
 targets += $(dtb-y)
 

arch/powerpc/dts/xilinx-ppc405-generic.dts

+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		console = &uart0;
+	};
+
+	uart0: serial@84000000 {
+		compatible = "xlnx,xps-uartlite-1.00.a";
+		interrupts = <0 0>;
+		reg = <0x84000000 0x10000>;
+	};
+} ;

arch/powerpc/dts/xilinx-ppc440-generic.dts

+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		console = &uart0;
+	};
+
+	uart0: serial@8b000000 {
+		compatible = "xlnx,xps-uartlite-1.00.a";
+		interrupts = <0 0>;
+		reg = <0x8b000000 0x10000>;
+	};
+} ;

arch/powerpc/include/asm/interrupt.h

 /*
  * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  * This work has been supported by: QTechnology  http://qtec.com/
  * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
  *

arch/powerpc/include/asm/xilinx_irq.h

 /*
  * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  * This work has been supported by: QTechnology  http://qtec.com/
  * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
  * SPDX-License-Identifier:	GPL-2.0+

board/avnet/fx12mm/Kconfig

-if TARGET_FX12MM
-
-config SYS_BOARD
-	default "fx12mm"
-
-config SYS_VENDOR
-	default "avnet"
-
-config SYS_CONFIG_NAME
-	default "fx12mm"
-
-endif

board/avnet/fx12mm/MAINTAINERS

-FX12MM BOARD
-M:	Georg Schardt <schardt@team-ctech.de>
-S:	Maintained
-F:	board/avnet/fx12mm/
-F:	include/configs/fx12mm.h
-F:	configs/fx12mm_defconfig
-F:	configs/fx12mm_flash_defconfig

board/avnet/fx12mm/Makefile

-#
-# (C) Copyright 2008
-# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
-# This work has been supported by: Qtechnology http://qtec.com/
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= fx12mm.o
-
-include $(srctree)/board/xilinx/ppc405-generic/Makefile

board/avnet/fx12mm/fx12mm.c

-/*
- * (C) Copyright 2008
- *
- * Author: Xilinx Inc.
- *
- * Modified by:
- *  Georg Schardt <schardt@team-ctech.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/processor.h>
-
-int checkboard(void)
-{
-	char buf[64];
-	int i;
-	int l = getenv_f("serial#", buf, sizeof(buf));
-
-	if (l < 0) {
-		printf("Avnet Virtex4 FX12 with no serial #");
-	} else {
-		printf("Avnet Virtex4 FX12 Minimodul # ");
-		for (i = 0; i < l; ++i) {
-			if (buf[i] == ' ')
-				break;
-			putc(buf[i]);
-		}
-	}
-	putc('\n');
-	return 0;
-}

board/avnet/fx12mm/xparameters.h

-/*
- * (C) Copyright 2008
- *
- * Georg Schardt <schardt@team-ctech.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * CAUTION: This file is based on the xparameters.h automatically
- * generated by libgen. Version: Xilinx EDK 10.1.02 Build EDK_K_SP2.5
- */
-
-#ifndef __XPARAMETER_H__
-#define __XPARAMETER_H__
-
-/* RS232 */
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000
-#define XPAR_UARTNS550_0_BASEADDR 0x83E00000
-
-
-/* INT_C */
-#define XPAR_XPS_INTC_0_DEVICE_ID 0
-#define XPAR_XPS_INTC_0_BASEADDR 0x81800000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 2
-
-/* CPU core clock */
-#define XPAR_CORE_CLOCK_FREQ_HZ 300000000
-#define XPAR_PLB_CLOCK_FREQ_HZ  100000000
-
-/* RAM */
-#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000
-
-/* FLASH */
-#define XPAR_FLASH_MEM0_BASEADDR 0xFFC00000
-
-#endif

board/avnet/v5fx30teval/Kconfig

-if TARGET_V5FX30TEVAL
-
-config SYS_BOARD
-	default "v5fx30teval"
-
-config SYS_VENDOR
-	default "avnet"
-
-config SYS_CONFIG_NAME
-	default "v5fx30teval"
-
-endif

board/avnet/v5fx30teval/MAINTAINERS

-V5FX30TEVAL BOARD
-M:	Ricardo Ribalda <ricardo.ribalda@uam.es>
-S:	Maintained
-F:	board/avnet/v5fx30teval/
-F:	include/configs/v5fx30teval.h
-F:	configs/v5fx30teval_defconfig
-F:	configs/v5fx30teval_flash_defconfig

board/avnet/v5fx30teval/Makefile

-#
-# (C) Copyright 2008
-# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
-# This work has been supported by: Qtechnology http://qtec.com/
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= v5fx30teval.o
-
-include $(srctree)/board/xilinx/ppc440-generic/Makefile

board/avnet/v5fx30teval/v5fx30teval.c

-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology  http://qtec.com/
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/processor.h>
-
-
-int checkboard(void)
-{
-	puts("Avnet Virtex 5 FX30 Evaluation Board\n");
-	return 0;
-}

board/avnet/v5fx30teval/xparameters.h

-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology  http://qtec.com/
- * based on xparameters.h by Xilinx
- *
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#ifndef XPARAMETER_H
-#define XPARAMETER_H
-
-#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
-#define XPAR_INTC_0_BASEADDR		0x81800000
-#define XPAR_UARTLITE_0_BASEADDR	0x84000000
-#define XPAR_FLASH_MEM0_BASEADDR	0xFF000000
-#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
-#define XPAR_UARTLITE_0_BAUDRATE	9600
-
-#endif

board/xilinx/microblaze-generic/microblaze-generic.c

@@ -12,7 +12,6 @@
 #include <common.h>
 #include <config.h>
 #include <fdtdec.h>
-#include <netdev.h>
 #include <asm/processor.h>
 #include <asm/microblaze_intc.h>
 #include <asm/asm.h>
@@ -24,7 +23,6 @@ DECLARE_GLOBAL_DATA_PTR;
 static int reset_pin = -1;
 #endif
 
-#if CONFIG_IS_ENABLED(OF_CONTROL)
 ulong ram_base;
 
 void dram_init_banksize(void)
@@ -58,14 +56,6 @@ int dram_init(void)
 
 	return 0;
 };
-#else
-int dram_init(void)
-{
-	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-
-	return 0;
-}
-#endif
 
 int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
@@ -86,7 +76,7 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	return 0;
 }
 
-int gpio_init (void)
+static int gpio_init(void)
 {
 #ifdef CONFIG_XILINX_GPIO
 	reset_pin = gpio_alloc(CONFIG_SYS_GPIO_0_ADDR, "reset", 1);
@@ -96,32 +86,9 @@ int gpio_init (void)
 	return 0;
 }
 
-void board_init(void)
+int board_late_init(void)
 {
 	gpio_init();
-}
 
-int board_eth_init(bd_t *bis)
-{
-	int ret = 0;
-
-#ifdef CONFIG_XILINX_AXIEMAC
-	ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR,
-						XILINX_AXIDMA_BASEADDR);
-#endif
-
-#if defined(CONFIG_XILINX_EMACLITE) && defined(XILINX_EMACLITE_BASEADDR)
-	u32 txpp = 0;
-	u32 rxpp = 0;
-# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
-	txpp = 1;
-# endif
-# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
-	rxpp = 1;
-# endif
-	ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
-			txpp, rxpp);
-#endif
-
-	return ret;
+	return 0;
 }

board/xilinx/microblaze-generic/xparameters.h

@@ -28,15 +28,6 @@
 #define XILINX_TIMER_BASEADDR	0x41c00000
 #define XILINX_TIMER_IRQ	0
 
-/* Uart pheriphery is RS232_Uart */
-#define XILINX_UARTLITE_BASEADDR	0x40600000
-#define XILINX_UARTLITE_BAUDRATE	115200
-
-/* IIC pheriphery is IIC_EEPROM */
-#define XILINX_IIC_0_BASEADDR	0x40800000
-#define XILINX_IIC_0_FREQ	100000
-#define XILINX_IIC_0_BIT	0
-
 /* GPIO is LEDs_4Bit*/
 #define XILINX_GPIO_BASEADDR	0x40000000
 
@@ -44,18 +35,6 @@
 #define XILINX_FLASH_START	0x2c000000
 #define XILINX_FLASH_SIZE	0x00800000
 
-/* Main Memory is DDR_SDRAM_64Mx32 */
-#define XILINX_RAM_START	0x28000000
-#define XILINX_RAM_SIZE	0x04000000
-
-/* Sysace Controller is SysACE_CompactFlash */
-#define XILINX_SYSACE_BASEADDR	0x41800000
-#define XILINX_SYSACE_HIGHADDR	0x4180ffff
-#define XILINX_SYSACE_MEM_WIDTH	16
-
-/* Ethernet controller is Ethernet_MAC */
-#define XILINX_EMACLITE_BASEADDR       0x40C00000
-
 /* Watchdog IP is wxi_timebase_wdt_0 */
 #define XILINX_WATCHDOG_BASEADDR	0x50000000
 #define XILINX_WATCHDOG_IRQ		1

board/xilinx/ml507/Kconfig

-if TARGET_ML507
-
-config SYS_BOARD
-	default "ml507"
-
-config SYS_VENDOR
-	default "xilinx"
-
-config SYS_CONFIG_NAME
-	default "ml507"
-
-endif

board/xilinx/ml507/MAINTAINERS

-ML507 BOARD
-M:	Ricardo Ribalda <ricardo.ribalda@uam.es>
-S:	Maintained
-F:	board/xilinx/ml507/
-F:	include/configs/ml507.h
-F:	configs/ml507_defconfig
-F:	configs/ml507_flash_defconfig

board/xilinx/ml507/Makefile

-#
-# (C) Copyright 2008
-# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
-# This work has been supported by: Qtechnology http://qtec.com/
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= ml507.o
-
-include $(srctree)/board/xilinx/ppc440-generic/Makefile

board/xilinx/ml507/ml507.c

-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology  http://qtec.com/
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/processor.h>
-
-
-int checkboard(void)
-{
-	puts("Xilinx ML507 Board\n");
-	return 0;
-}

board/xilinx/ml507/xparameters.h

-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology  http://qtec.com/
- * based on xparameters-ml507.h by Xilinx
- *
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#ifndef XPARAMETER_H
-#define XPARAMETER_H
-
-#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
-#define XPAR_IIC_EEPROM_BASEADDR	0x81600000
-#define XPAR_INTC_0_BASEADDR		0x81800000
-#define XPAR_UARTLITE_0_BASEADDR	0x84000000
-#define XPAR_FLASH_MEM0_BASEADDR	0xFE000000
-#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
-#define XPAR_UARTLITE_0_BAUDRATE	9600
-
-#endif

board/xilinx/ppc405-generic/MAINTAINERS

 PPC405-GENERIC BOARD
-M:	Ricardo Ribalda <ricardo.ribalda@uam.es>
+M:	Ricardo Ribalda <ricardo.ribalda@gmail.com>
 S:	Maintained
 F:	board/xilinx/ppc405-generic/
 F:	include/configs/xilinx-ppc405-generic.h

board/xilinx/ppc405-generic/Makefile

@@ -3,10 +3,10 @@
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # (C) Copyright 2008
-# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
 # Work supported by Qtechnology http://www.qtec.com
 #
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y	+= ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o
+obj-y	+= xilinx_ppc405_generic.o

board/xilinx/ppc405-generic/xilinx_ppc405_generic.c

 /*
  * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  * This work has been supported by: QTechnology  http://qtec.com/
  *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -10,39 +10,32 @@
 #include <common.h>
 #include <asm/processor.h>
 
-ulong __get_PCI_freq(void)
+ulong get_PCI_freq(void)
 {
 	return 0;
 }
 
-ulong get_PCI_freq(void) __attribute__((weak, alias("__get_PCI_freq")));
-
-int __board_pre_init(void)
-{
-	return 0;
-}
-int board_pre_init(void) __attribute__((weak, alias("__board_pre_init")));
-
-int __checkboard(void)
+int checkboard(void)
 {
 	puts("Xilinx PPC405 Generic Board\n");
 	return 0;
 }
-int checkboard(void) __attribute__((weak, alias("__checkboard")));
 
-phys_size_t __initdram(int board_type)
+phys_size_t initdram(int board_type)
 {
 	return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
 			    CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024);
 }
-phys_size_t initdram(int) __attribute__((weak, alias("__initdram")));
 
-void __get_sys_info(sys_info_t *sysInfo)
+void get_sys_info(sys_info_t *sys_info)
 {
-	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
-	sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
-	sysInfo->freqPCI = 0;
+	sys_info->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
+	sys_info->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
+	sys_info->freqPCI = 0;
 
 	return;
 }
-void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info")));
+
+int get_serial_clock(void){
+	return XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
+}

board/xilinx/ppc405-generic/xparameters.h

 /*
  * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  * This work has been supported by: QTechnology  http://qtec.com/
  * based on xparameters-ml507.h by Xilinx
  *
@@ -14,12 +14,11 @@
 #define XPAR_IIC_EEPROM_BASEADDR	0x81600000
 #define XPAR_INTC_0_BASEADDR		0x81800000
 #define XPAR_SPI_0_BASEADDR             0x83400000
-#define XPAR_UARTLITE_0_BASEADDR	0x84000000
 #define XPAR_FLASH_MEM0_BASEADDR	0xFE000000
 #define XPAR_PLB_CLOCK_FREQ_HZ		100000000
 #define XPAR_CORE_CLOCK_FREQ_HZ		400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
-#define XPAR_UARTLITE_0_BAUDRATE	9600
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS	32
 #define XPAR_SPI_0_NUM_TRANSFER_BITS	8
+#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ	100000000
 
 #endif

board/xilinx/ppc440-generic/MAINTAINERS

 PPC440-GENERIC BOARD
-M:	Ricardo Ribalda <ricardo.ribalda@uam.es>
+M:	Ricardo Ribalda <ricardo.ribalda@gmail.com>
 S:	Maintained
 F:	board/xilinx/ppc440-generic/
 F:	include/configs/xilinx-ppc440-generic.h

board/xilinx/ppc440-generic/Makefile

@@ -3,11 +3,11 @@
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # (C) Copyright 2008
-# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
 # Work supported by Qtechnology http://www.qtec.com
 #
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y	+= ../../xilinx/ppc440-generic/xilinx_ppc440_generic.o
-extra-y 	+= ../../xilinx/ppc440-generic/init.o
+obj-y	+= xilinx_ppc440_generic.o
+extra-y += init.o

board/xilinx/ppc440-generic/init.S

 /*
  *  (C) Copyright 2008
- *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  *  This work has been supported by: QTechnology  http://qtec.com/
  *
  * SPDX-License-Identifier:	GPL-2.0+

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c

 /*
  * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  * This work has been supported by: QTechnology  http://qtec.com/
  *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -8,34 +8,51 @@
 
 #include <config.h>
 #include <common.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
-int __board_pre_init(void)
-{
-	return 0;
-}
-int board_pre_init(void) __attribute__((weak, alias("__board_pre_init")));
-
-int __checkboard(void)
+int checkboard(void)
 {
 	puts("Xilinx PPC440 Generic Board\n");
 	return 0;
 }
-int checkboard(void) __attribute__((weak, alias("__checkboard")));
 
-phys_size_t __initdram(int board_type)
+phys_size_t initdram(int board_type)
 {
 	return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
 			    CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024);
 }
-phys_size_t initdram(int) __attribute__((weak, alias("__initdram")));
 
-void __get_sys_info(sys_info_t *sysInfo)
+void get_sys_info(sys_info_t *sys_info)
 {
-	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
-	sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
-	sysInfo->freqPCI = 0;
+	sys_info->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
+	sys_info->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
+	sys_info->freqPCI = 0;
 
 	return;
 }
-void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info")));
+
+int get_serial_clock(void){
+	return XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int ret = 0;
+
+	puts("Init xilinx temac\n");
+#ifdef XPAR_LLTEMAC_0_BASEADDR
+	ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_0_BASEADDR,
+			XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
+			XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR);
+
+#endif
+
+#ifdef XPAR_LLTEMAC_1_BASEADDR
+	ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_1_BASEADDR,
+			XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
+			XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR);
+#endif
+
+	return ret;
+}

board/xilinx/ppc440-generic/xparameters.h

 /*
  * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  * This work has been supported by: QTechnology  http://qtec.com/
  * based on xparameters-ml507.h by Xilinx
  *
@@ -12,12 +12,15 @@
 
 #define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
 #define XPAR_IIC_EEPROM_BASEADDR	0x81600000
-#define XPAR_INTC_0_BASEADDR		0x81800000
-#define XPAR_UARTLITE_0_BASEADDR	0x84000000
-#define XPAR_FLASH_MEM0_BASEADDR	0xFE000000
+#define XPAR_INTC_0_BASEADDR		0x87000000
+#define XPAR_FLASH_MEM0_BASEADDR	0xF0000000
 #define XPAR_PLB_CLOCK_FREQ_HZ		100000000
 #define XPAR_CORE_CLOCK_FREQ_HZ		400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
-#define XPAR_UARTLITE_0_BAUDRATE	9600
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS	32
+#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ	100000000
+#define XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR 0x80
+#define XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR 0x98
+#define XPAR_LLTEMAC_0_BASEADDR		0x83000000
+#define XPAR_LLTEMAC_1_BASEADDR		0x83000040
 
 #endif

board/xilinx/zynq/board.c

@@ -8,7 +8,6 @@
 #include <fdtdec.h>
 #include <fpga.h>
 #include <mmc.h>
-#include <netdev.h>
 #include <zynqpl.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/sys_proto.h>
@@ -94,34 +93,11 @@ int board_late_init(void)
 #ifdef CONFIG_DISPLAY_BOARDINFO
 int checkboard(void)
 {
-	puts("Board:\tXilinx Zynq\n");
+	puts("Board: Xilinx Zynq\n");
 	return 0;
 }
 #endif
 
-int board_eth_init(bd_t *bis)
-{
-	u32 ret = 0;
-
-#ifdef CONFIG_XILINX_AXIEMAC
-	ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR,
-						XILINX_AXIDMA_BASEADDR);
-#endif
-#ifdef CONFIG_XILINX_EMACLITE
-	u32 txpp = 0;
-	u32 rxpp = 0;
-# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
-	txpp = 1;
-# endif
-# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
-	rxpp = 1;
-# endif
-	ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
-			txpp, rxpp);
-#endif
-	return ret;
-}
-
 int dram_init(void)
 {
 #if CONFIG_IS_ENABLED(OF_CONTROL)

board/xilinx/zynqmp/zynqmp.c

@@ -9,6 +9,7 @@
 #include <netdev.h>
 #include <ahci.h>
 #include <scsi.h>
+#include <asm/arch/clk.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/io.h>
@@ -28,10 +29,18 @@ int board_early_init_r(void)
 {
 	u32 val;
 
-	val = readl(&crlapb_base->timestamp_ref_ctrl);
-	val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
-	writel(val, &crlapb_base->timestamp_ref_ctrl);
-
+	if (current_el() == 3) {
+		val = readl(&crlapb_base->timestamp_ref_ctrl);
+		val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
+		writel(val, &crlapb_base->timestamp_ref_ctrl);
+
+		/* Program freq register in System counter */
+		writel(zynqmp_get_system_timer_freq(),
+		       &iou_scntr_secure->base_frequency_id_register);
+		/* And enable system counter */
+		writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN,
+		       &iou_scntr_secure->counter_control_register);
+	}
 	/* Program freq register in System counter and enable system counter */
 	writel(gd->cpu_clk, &iou_scntr->base_frequency_id_register);
 	writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_HDBG |
@@ -48,11 +57,6 @@ int dram_init(void)
 	return 0;
 }
 
-int timer_init(void)
-{
-	return 0;
-}
-
 void reset_cpu(ulong addr)
 {
 }
@@ -73,11 +77,36 @@ int board_late_init(void)
 	reg = readl(&crlapb_base->boot_mode);
 	bootmode = reg & BOOT_MODES_MASK;
 
+	puts("Bootmode: ");
 	switch (bootmode) {
-	case SD_MODE:
+	case JTAG_MODE:
+		puts("JTAG_MODE\n");
+		setenv("modeboot", "jtagboot");
+		break;
+	case QSPI_MODE_24BIT:
+	case QSPI_MODE_32BIT:
+		setenv("modeboot", "qspiboot");
+		puts("QSPI_MODE\n");
+		break;
 	case EMMC_MODE:
+		puts("EMMC_MODE\n");
+		setenv("modeboot", "sdboot");
+		break;
+	case SD_MODE:
+		puts("SD_MODE\n");
 		setenv("modeboot", "sdboot");
 		break;
+	case SD_MODE1:
+		puts("SD_MODE1\n");
+#if defined(CONFIG_ZYNQ_SDHCI0) && defined(CONFIG_ZYNQ_SDHCI1)
+		setenv("sdbootdev", "1");
+#endif
+		setenv("modeboot", "sdboot");
+		break;
+	case NAND_MODE:
+		puts("NAND_MODE\n");
+		setenv("modeboot", "nandboot");
+		break;
 	default:
 		printf("Invalid Boot Mode:0x%x\n", bootmode);
 		break;
@@ -88,7 +117,7 @@ int board_late_init(void)
 
 int checkboard(void)
 {
-	puts("Board:\tXilinx ZynqMP\n");
+	puts("Board: Xilinx ZynqMP\n");
 	return 0;
 }
 

cmd/bdinfo.c

@@ -205,7 +205,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_num("sram start     ",	(ulong)bd->bi_sramstart);
 	print_num("sram size      ",	(ulong)bd->bi_sramsize);
 #endif
-#if defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH)
 	print_eths();
 #endif
 	printf("baudrate    = %u bps\n", gd->baudrate);

cmd/fpga.c

@@ -86,7 +86,7 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 			debug("*  fpga: cmdline image address = 0x%08lx\n",
 			      (ulong)fpga_data);
 		}
-		debug("%s: fpga_data = 0x%x\n", __func__, (uint)fpga_data);
+		debug("%s: fpga_data = 0x%lx\n", __func__, (ulong)fpga_data);
 
 	case 3:		/* fpga <op> <dev | data addr> */
 		dev = (int)simple_strtoul(argv[2], NULL, 16);
@@ -107,13 +107,13 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 			} else
 #endif
 			{
-				fpga_data = (void *)dev;
+				fpga_data = (void *)(uintptr_t)dev;
 				debug("*  fpga: cmdline image addr = 0x%08lx\n",
 				      (ulong)fpga_data);
 			}
 
-			debug("%s: fpga_data = 0x%x\n",
-			      __func__, (uint)fpga_data);
+			debug("%s: fpga_data = 0x%lx\n",
+			      __func__, (ulong)fpga_data);
 			dev = FPGA_INVALID_DEVICE;	/* reset device num */
 		}
 

configs/fx12mm_defconfig

-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_FX12MM=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,INIT_TLB=board/xilinx/ppc405-generic/init.o"
-CONFIG_SYS_PROMPT="FX12MM:/# "
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_SYS_NS16550=y

configs/fx12mm_flash_defconfig

-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_FX12MM=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc405-generic/init.o"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_SYS_NS16550=y

configs/microblaze-generic_defconfig

 CONFIG_MICROBLAZE=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_DM=y
 CONFIG_TARGET_MICROBLAZE_GENERIC=y
 CONFIG_SYS_TEXT_BASE=0x29000000
 CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
 CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot-mONStR> "
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
+CONFIG_NETCONSOLE=y
+CONFIG_DM_ETH=y
+CONFIG_XILINX_AXIEMAC=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SYS_NS16550=y
+CONFIG_XILINX_UARTLITE=y

configs/ml507_defconfig

-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_ML507=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o"
-CONFIG_SYS_PROMPT="ml507:/# "
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set

configs/ml507_flash_defconfig

-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_ML507=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set

configs/v5fx30teval_defconfig

-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_V5FX30TEVAL=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o"
-CONFIG_SYS_PROMPT="v5fx30t:/# "
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set

configs/v5fx30teval_flash_defconfig

-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_V5FX30TEVAL=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set

configs/xilinx-ppc405-generic_defconfig

@@ -7,3 +7,11 @@ CONFIG_SYS_PROMPT="xlx-ppc405:/# "
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_NET is not set
 # CONFIG_CMD_NFS is not set
+CONFIG_SYS_MALLOC_SIMPLE=y
+CONFIG_XILINX_UARTLITE=y
+CONFIG_SYS_NS16550=y
+CONFIG_OF_EMBED=y
+CONFIG_OF_CONTROL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_DEFAULT_DEVICE_TREE="xilinx-ppc440-generic"

configs/xilinx-ppc405-generic_flash_defconfig

-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_XILINX_PPC405_GENERIC=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set

configs/xilinx-ppc440-generic_defconfig

@@ -3,7 +3,15 @@ CONFIG_4xx=y
 CONFIG_TARGET_XILINX_PPC440_GENERIC=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1"
 CONFIG_SYS_PROMPT="board:/# "
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
+CONFIG_SYS_MALLOC_SIMPLE=y
+CONFIG_XILINX_UARTLITE=y
+CONFIG_SYS_NS16550=y
+CONFIG_OF_EMBED=y
+CONFIG_OF_CONTROL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_DEFAULT_DEVICE_TREE="xilinx-ppc440-generic"
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_NETCONSOLE=y

configs/xilinx-ppc440-generic_flash_defconfig

-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_XILINX_PPC440_GENERIC=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set

configs/zynq_microzed_defconfig

@@ -6,6 +6,7 @@ CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y

configs/zynq_picozed_defconfig

@@ -3,6 +3,7 @@ CONFIG_ARCH_ZYNQ=y
 CONFIG_TARGET_ZYNQ_PICOZED=y
 CONFIG_DEFAULT_DEVICE_TREE="zynq-picozed"
 CONFIG_SPL=y
+CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y

configs/zynq_zc702_defconfig

@@ -5,6 +5,7 @@ CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
@@ -12,6 +13,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y

configs/zynq_zc706_defconfig

@@ -6,6 +6,7 @@ CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
@@ -13,6 +14,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y

configs/zynq_zc770_xm010_defconfig

@@ -7,6 +7,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010"
+CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
@@ -14,6 +15,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y

configs/zynq_zc770_xm011_defconfig

@@ -7,6 +7,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011"
+CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y

configs/zynq_zc770_xm012_defconfig

@@ -7,6 +7,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012"
+CONFIG_SYS_PROMPT="Zynq> "
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NET_RANDOM_ETHADDR=y

configs/zynq_zc770_xm013_defconfig

@@ -7,10 +7,13 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013"
+CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
 CONFIG_ZYNQ_GEM=y

configs/zynq_zed_defconfig

@@ -6,6 +6,7 @@ CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
@@ -13,6 +14,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y

configs/zynq_zybo_defconfig

@@ -6,17 +6,18 @@ CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_ZYNQ=y
 CONFIG_DEBUG_UART_BASE=0xe0001000
 CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_ZYNQ_QSPI=y

doc/device-tree-bindings/serial/xilinx_uartlite.txt

+Binding for Xilinx Uartlite Controller
+
+Required properties:
+- compatible : should be "xlnx,xps-uartlite-1.00.a", or "xlnx,opb-uartlite-1.00.b"
+- reg: Should contain UART controller registers location and length.
+- interrupts: Should contain UART controller interrupts.
+
+Example:
+	serial@40600000 {
+		compatible = "xlnx,xps-uartlite-1.00.a";
+		interrupts = <1 0>;
+		reg = <0x40600000 0x10000>;
+	};

doc/driver-model/serial-howto.txt

@@ -15,7 +15,6 @@ is time for maintainers to start converting over the remaining serial drivers:
    serial_pxa.c
    serial_s3c24x0.c
    serial_sa1100.c
-   serial_xuartlite.c
    usbtty.c
 
 You should complete this by the end of January 2016.

drivers/fpga/xilinx.c

@@ -75,8 +75,8 @@ int fpga_loadbitstream(int devnum, char *fpgadata, size_t size,
 		buffer[i] = *dataptr++;
 
 	if (xdesc->name) {
-		i = strncmp(buffer, xdesc->name, strlen(xdesc->name));
-		if (i) {
+		i = (ulong)strstr(buffer, xdesc->name);
+		if (!i) {
 			printf("%s: Wrong bitstream ID for this device\n",
 			       __func__);
 			printf("%s: Bitstream ID %s, current device ID %d/%s\n",

drivers/hwmon/adt7460.c

 /*
  * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid, ricardo.ribalda@gmail.com
  * This work has been supported by: QTechnology  http://qtec.com/
  * SPDX-License-Identifier:	GPL-2.0+
  */

drivers/mmc/sdhci.c

@@ -530,6 +530,10 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
 		if (caps & SDHCI_CAN_DO_8BIT)
 			host->cfg.host_caps |= MMC_MODE_8BIT;
 	}
+
+	if (host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)
+		host->cfg.host_caps &= ~(MMC_MODE_HS | MMC_MODE_HS_52MHz);
+
 	if (host->host_caps)
 		host->cfg.host_caps |= host->host_caps;
 

drivers/mmc/zynq_sdhci.c

@@ -13,6 +13,10 @@
 #include <malloc.h>
 #include <sdhci.h>
 
+#ifndef CONFIG_ZYNQ_SDHCI_MIN_FREQ
+# define CONFIG_ZYNQ_SDHCI_MIN_FREQ	0
+#endif
+
 static int arasan_sdhci_probe(struct udevice *dev)
 {
 	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
@@ -20,9 +24,15 @@ static int arasan_sdhci_probe(struct udevice *dev)
 
 	host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
 		       SDHCI_QUIRK_BROKEN_R1B;
+
+#ifdef CONFIG_ZYNQ_HISPD_BROKEN
+	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
+#endif
+
 	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
 
-	add_sdhci(host, CONFIG_ZYNQ_SDHCI_MAX_FREQ, 0);
+	add_sdhci(host, CONFIG_ZYNQ_SDHCI_MAX_FREQ,
+		  CONFIG_ZYNQ_SDHCI_MIN_FREQ);
 
 	upriv->mmc = host->mmc;
 

drivers/net/Kconfig

@@ -102,6 +102,22 @@ config PCH_GBE
 	  This MAC is present in Intel Platform Controller Hub EG20T. It
 	  supports 10/100/1000 Mbps operation.
 
+config XILINX_AXIEMAC
+	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+	select PHYLIB
+	select MII
+	bool "Xilinx AXI Ethernet"
+	help
+	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
+
+config XILINX_EMACLITE
+	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+	select PHYLIB
+	select MII
+	bool "Xilinx Ethernetlite"
+	help
+	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
+
 config ZYNQ_GEM
 	depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
 	select PHYLIB

drivers/net/phy/ti.c

@@ -41,6 +41,8 @@
 
 /* PHY CTRL bits */
 #define DP83867_PHYCR_FIFO_DEPTH_SHIFT		14
+#define DP83867_MDI_CROSSOVER		5
+#define DP83867_MDI_CROSSOVER_AUTO	2
 
 /* RGMIIDCTL bits */
 #define DP83867_RGMII_TX_CLK_DELAY_SHIFT	4
@@ -149,6 +151,7 @@ static int dp83867_config(struct phy_device *phydev)
 
 	if (phy_interface_is_rgmii(phydev)) {
 		ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
+			(DP83867_MDI_CROSSOVER_AUTO << DP83867_MDI_CROSSOVER) |
 			(FIFO_DEPTH << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
 		if (ret)
 			return ret;

drivers/net/xilinx_axi_emac.c

@@ -8,15 +8,14 @@
 
 #include <config.h>
 #include <common.h>
+#include <dm.h>
 #include <net.h>
 #include <malloc.h>
 #include <asm/io.h>
 #include <phy.h>
 #include <miiphy.h>
 
-#if !defined(CONFIG_PHYLIB)
-# error AXI_ETHERNET requires PHYLIB
-#endif
+DECLARE_GLOBAL_DATA_PTR;
 
 /* Link setup */
 #define XAE_EMMC_LINKSPEED_MASK	0xC0000000 /* Link speed */
@@ -86,7 +85,8 @@ struct axidma_priv {
 	struct axidma_reg *dmatx;
 	struct axidma_reg *dmarx;
 	int phyaddr;
-
+	struct axi_regs *iobase;
+	phy_interface_t interface;
 	struct phy_device *phydev;
 	struct mii_dev *bus;
 };
@@ -147,9 +147,8 @@ struct axi_regs {
  */
 #define PHY_DETECT_MASK 0x1808
 
-static inline int mdio_wait(struct eth_device *dev)
+static inline int mdio_wait(struct axi_regs *regs)
 {
-	struct axi_regs *regs = (struct axi_regs *)dev->iobase;
 	u32 timeout = 200;
 
 	/* Wait till MDIO interface is ready to accept a new transaction. */
@@ -165,13 +164,13 @@ static inline int mdio_wait(struct eth_device *dev)
 	return 0;
 }
 
-static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum,
-								u16 *val)
+static u32 phyread(struct axidma_priv *priv, u32 phyaddress, u32 registernum,
+		   u16 *val)
 {
-	struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+	struct axi_regs *regs = priv->iobase;
 	u32 mdioctrlreg = 0;
 
-	if (mdio_wait(dev))
+	if (mdio_wait(regs))
 		return 1;
 
 	mdioctrlreg = ((phyaddress << XAE_MDIO_MCR_PHYAD_SHIFT) &
@@ -183,7 +182,7 @@ static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum,
 
 	out_be32(&regs->mdio_mcr, mdioctrlreg);
 
-	if (mdio_wait(dev))
+	if (mdio_wait(regs))
 		return 1;
 
 	/* Read data */
@@ -191,13 +190,13 @@ static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum,
 	return 0;
 }
 
-static u32 phywrite(struct eth_device *dev, u32 phyaddress, u32 registernum,
-								u32 data)
+static u32 phywrite(struct axidma_priv *priv, u32 phyaddress, u32 registernum,
+		    u32 data)
 {
-	struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+	struct axi_regs *regs = priv->iobase;
 	u32 mdioctrlreg = 0;
 
-	if (mdio_wait(dev))
+	if (mdio_wait(regs))
 		return 1;
 
 	mdioctrlreg = ((phyaddress << XAE_MDIO_MCR_PHYAD_SHIFT) &
@@ -212,19 +211,18 @@ static u32 phywrite(struct eth_device *dev, u32 phyaddress, u32 registernum,
 
 	out_be32(&regs->mdio_mcr, mdioctrlreg);
 
-	if (mdio_wait(dev))
+	if (mdio_wait(regs))
 		return 1;
 
 	return 0;
 }
 
-/* Setting axi emac and phy to proper setting */
-static int setup_phy(struct eth_device *dev)
+static int axiemac_phy_init(struct udevice *dev)
 {
 	u16 phyreg;
-	u32 i, speed, emmc_reg, ret;
-	struct axidma_priv *priv = dev->priv;
-	struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+	u32 i, ret;
+	struct axidma_priv *priv = dev_get_priv(dev);
+	struct axi_regs *regs = priv->iobase;
 	struct phy_device *phydev;
 
 	u32 supported = SUPPORTED_10baseT_Half |
@@ -234,16 +232,19 @@ static int setup_phy(struct eth_device *dev)
 			SUPPORTED_1000baseT_Half |
 			SUPPORTED_1000baseT_Full;
 
+	/* Set default MDIO divisor */
+	out_be32(&regs->mdio_mc, XAE_MDIO_DIV_DFT | XAE_MDIO_MC_MDIOEN_MASK);
+
 	if (priv->phyaddr == -1) {
 		/* Detect the PHY address */
 		for (i = 31; i >= 0; i--) {
-			ret = phyread(dev, i, PHY_DETECT_REG, &phyreg);
+			ret = phyread(priv, i, PHY_DETECT_REG, &phyreg);
 			if (!ret && (phyreg != 0xFFFF) &&
 			((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
 				/* Found a valid PHY address */
 				priv->phyaddr = i;
 				debug("axiemac: Found valid phy address, %x\n",
-									phyreg);
+				      i);
 				break;
 			}
 		}
@@ -256,6 +257,18 @@ static int setup_phy(struct eth_device *dev)
 	phydev->advertising = phydev->supported;
 	priv->phydev = phydev;
 	phy_config(phydev);
+
+	return 0;
+}
+
+/* Setting axi emac and phy to proper setting */
+static int setup_phy(struct udevice *dev)
+{
+	u32 speed, emmc_reg;
+	struct axidma_priv *priv = dev_get_priv(dev);
+	struct axi_regs *regs = priv->iobase;
+	struct phy_device *phydev = priv->phydev;
+
 	if (phy_startup(phydev)) {
 		printf("axiemac: could not initialize PHY %s\n",
 		       phydev->dev->name);
@@ -299,9 +312,9 @@ static int setup_phy(struct eth_device *dev)
 }
 
 /* STOP DMA transfers */
-static void axiemac_halt(struct eth_device *dev)
+static void axiemac_stop(struct udevice *dev)
 {
-	struct axidma_priv *priv = dev->priv;
+	struct axidma_priv *priv = dev_get_priv(dev);
 	u32 temp;
 
 	/* Stop the hardware */
@@ -316,9 +329,9 @@ static void axiemac_halt(struct eth_device *dev)
 	debug("axiemac: Halted\n");
 }
 
-static int axi_ethernet_init(struct eth_device *dev)
+static int axi_ethernet_init(struct axidma_priv *priv)
 {
-	struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+	struct axi_regs *regs = priv->iobase;
 	u32 timeout = 200;
 
 	/*
@@ -359,25 +372,26 @@ static int axi_ethernet_init(struct eth_device *dev)
 	return 0;
 }
 
-static int axiemac_setup_mac(struct eth_device *dev)
+static int axiemac_write_hwaddr(struct udevice *dev)
 {
-	struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+	struct eth_pdata *pdata = dev_get_platdata(dev);
+	struct axidma_priv *priv = dev_get_priv(dev);
+	struct axi_regs *regs = priv->iobase;
 
 	/* Set the MAC address */
-	int val = ((dev->enetaddr[3] << 24) | (dev->enetaddr[2] << 16) |
-		(dev->enetaddr[1] << 8) | (dev->enetaddr[0]));
+	int val = ((pdata->enetaddr[3] << 24) | (pdata->enetaddr[2] << 16) |
+		(pdata->enetaddr[1] << 8) | (pdata->enetaddr[0]));
 	out_be32(&regs->uaw0, val);
 
-	val = (dev->enetaddr[5] << 8) | dev->enetaddr[4] ;
+	val = (pdata->enetaddr[5] << 8) | pdata->enetaddr[4];
 	val |= in_be32(&regs->uaw1) & ~XAE_UAW1_UNICASTADDR_MASK;
 	out_be32(&regs->uaw1, val);
 	return 0;
 }
 
 /* Reset DMA engine */
-static void axi_dma_init(struct eth_device *dev)
+static void axi_dma_init(struct axidma_priv *priv)
 {
-	struct axidma_priv *priv = dev->priv;
 	u32 timeout = 500;
 
 	/* Reset the engine so the hardware starts from a known state */
@@ -388,9 +402,9 @@ static void axi_dma_init(struct eth_device *dev)
 	while (timeout--) {
 		/* Check transmit/receive channel */
 		/* Reset is done when the reset bit is low */
-		if (!(in_be32(&priv->dmatx->control) |
+		if (!((in_be32(&priv->dmatx->control) |
 				in_be32(&priv->dmarx->control))
-						& XAXIDMA_CR_RESET_MASK) {
+						& XAXIDMA_CR_RESET_MASK)) {
 			break;
 		}
 	}
@@ -398,10 +412,10 @@ static void axi_dma_init(struct eth_device *dev)
 		printf("%s: Timeout\n", __func__);
 }
 
-static int axiemac_init(struct eth_device *dev, bd_t * bis)
+static int axiemac_start(struct udevice *dev)
 {
-	struct axidma_priv *priv = dev->priv;
-	struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+	struct axidma_priv *priv = dev_get_priv(dev);
+	struct axi_regs *regs = priv->iobase;
 	u32 temp;
 
 	debug("axiemac: Init started\n");
@@ -411,10 +425,10 @@ static int axiemac_init(struct eth_device *dev, bd_t * bis)
 	 * reset, and since AXIDMA reset line is connected to AxiEthernet, this
 	 * would ensure a reset of AxiEthernet.
 	 */
-	axi_dma_init(dev);
+	axi_dma_init(priv);
 
 	/* Initialize AxiEthernet hardware. */
-	if (axi_ethernet_init(dev))
+	if (axi_ethernet_init(priv))
 		return -1;
 
 	/* Disable all RX interrupts before RxBD space setup */
@@ -452,7 +466,7 @@ static int axiemac_init(struct eth_device *dev, bd_t * bis)
 
 	/* PHY setup */
 	if (!setup_phy(dev)) {
-		axiemac_halt(dev);
+		axiemac_stop(dev);
 		return -1;
 	}
 
@@ -460,9 +474,9 @@ static int axiemac_init(struct eth_device *dev, bd_t * bis)
 	return 0;
 }
 
-static int axiemac_send(struct eth_device *dev, void *ptr, int len)
+static int axiemac_send(struct udevice *dev, void *ptr, int len)
 {
-	struct axidma_priv *priv = dev->priv;
+	struct axidma_priv *priv = dev_get_priv(dev);
 	u32 timeout;
 
 	if (len > PKTSIZE_ALIGN)
@@ -498,8 +512,8 @@ static int axiemac_send(struct eth_device *dev, void *ptr, int len)
 	/* Wait for transmission to complete */
 	debug("axiemac: Waiting for tx to be done\n");
 	timeout = 200;
-	while (timeout && (!in_be32(&priv->dmatx->status) &
-			(XAXIDMA_IRQ_DELAY_MASK | XAXIDMA_IRQ_IOC_MASK))) {
+	while (timeout && (!(in_be32(&priv->dmatx->status) &
+			(XAXIDMA_IRQ_DELAY_MASK | XAXIDMA_IRQ_IOC_MASK)))) {
 		timeout--;
 		udelay(1);
 	}
@@ -512,10 +526,9 @@ static int axiemac_send(struct eth_device *dev, void *ptr, int len)
 	return 0;
 }
 
-static int isrxready(struct eth_device *dev)
+static int isrxready(struct axidma_priv *priv)
 {
 	u32 status;
-	struct axidma_priv *priv = dev->priv;
 
 	/* Read pending interrupts */
 	status = in_be32(&priv->dmarx->status);
@@ -533,15 +546,15 @@ static int isrxready(struct eth_device *dev)
 	return 0;
 }
 
-static int axiemac_recv(struct eth_device *dev)
+static int axiemac_recv(struct udevice *dev, int flags, uchar **packetp)
 {
 	u32 length;
-	struct axidma_priv *priv = dev->priv;
+	struct axidma_priv *priv = dev_get_priv(dev);
 	u32 temp;
 
 	/* Wait for an incoming packet */
-	if (!isrxready(dev))
-		return 0;
+	if (!isrxready(priv))
+		return -1;
 
 	debug("axiemac: RX data ready\n");
 
@@ -554,9 +567,14 @@ static int axiemac_recv(struct eth_device *dev)
 #ifdef DEBUG
 	print_buffer(&rxframe, &rxframe[0], 1, length, 16);
 #endif
-	/* Pass the received frame up for processing */
-	if (length)
-		net_process_received_packet(rxframe, length);
+
+	*packetp = rxframe;
+	return length;
+}
+
+static int axiemac_free_pkt(struct udevice *dev, uchar *packet, int length)
+{
+	struct axidma_priv *priv = dev_get_priv(dev);
 
 #ifdef DEBUG
 	/* It is useful to clear buffer to be sure that it is consistent */
@@ -581,76 +599,128 @@ static int axiemac_recv(struct eth_device *dev)
 
 	debug("axiemac: RX completed, framelength = %d\n", length);
 
-	return length;
+	return 0;
 }
 
-static int axiemac_miiphy_read(const char *devname, uchar addr,
-							uchar reg, ushort *val)
+static int axiemac_miiphy_read(struct mii_dev *bus, int addr,
+			       int devad, int reg)
 {
-	struct eth_device *dev = eth_get_dev();
-	u32 ret;
+	int ret;
+	u16 value;
 
-	ret = phyread(dev, addr, reg, val);
-	debug("axiemac: Read MII 0x%x, 0x%x, 0x%x\n", addr, reg, *val);
-	return ret;
+	ret = phyread(bus->priv, addr, reg, &value);
+	debug("axiemac: Read MII 0x%x, 0x%x, 0x%x, %d\n", addr, reg,
+	      value, ret);
+	return value;
 }
 
-static int axiemac_miiphy_write(const char *devname, uchar addr,
-							uchar reg, ushort val)
+static int axiemac_miiphy_write(struct mii_dev *bus, int addr, int devad,
+				int reg, u16 value)
 {
-	struct eth_device *dev = eth_get_dev();
-
-	debug("axiemac: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, val);
-	return phywrite(dev, addr, reg, val);
+	debug("axiemac: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, value);
+	return phywrite(bus->priv, addr, reg, value);
 }
 
-static int axiemac_bus_reset(struct mii_dev *bus)
+static int axi_emac_probe(struct udevice *dev)
 {
-	debug("axiemac: Bus reset\n");
+	struct axidma_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	priv->bus = mdio_alloc();
+	priv->bus->read = axiemac_miiphy_read;
+	priv->bus->write = axiemac_miiphy_write;
+	priv->bus->priv = priv;
+	strcpy(priv->bus->name, "axi_emac");
+
+	ret = mdio_register(priv->bus);
+	if (ret)
+		return ret;
+
+	axiemac_phy_init(dev);
+
 	return 0;
 }
 
-int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
-							unsigned long dma_addr)
+static int axi_emac_remove(struct udevice *dev)
 {
-	struct eth_device *dev;
-	struct axidma_priv *priv;
+	struct axidma_priv *priv = dev_get_priv(dev);
 
-	dev = calloc(1, sizeof(struct eth_device));
-	if (dev == NULL)
-		return -1;
+	free(priv->phydev);
+	mdio_unregister(priv->bus);
+	mdio_free(priv->bus);
 
-	dev->priv = calloc(1, sizeof(struct axidma_priv));
-	if (dev->priv == NULL) {
-		free(dev);
-		return -1;
-	}
-	priv = dev->priv;
+	return 0;
+}
 
-	sprintf(dev->name, "aximac.%lx", base_addr);
+static const struct eth_ops axi_emac_ops = {
+	.start			= axiemac_start,
+	.send			= axiemac_send,
+	.recv			= axiemac_recv,
+	.free_pkt		= axiemac_free_pkt,
+	.stop			= axiemac_stop,
+	.write_hwaddr		= axiemac_write_hwaddr,
+};
 
-	dev->iobase = base_addr;
-	priv->dmatx = (struct axidma_reg *)dma_addr;
+static int axi_emac_ofdata_to_platdata(struct udevice *dev)
+{
+	struct eth_pdata *pdata = dev_get_platdata(dev);
+	struct axidma_priv *priv = dev_get_priv(dev);
+	int offset = 0;
+	const char *phy_mode;
+
+	pdata->iobase = (phys_addr_t)dev_get_addr(dev);
+	priv->iobase = (struct axi_regs *)pdata->iobase;
+
+	offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset,
+				       "axistream-connected");
+	if (offset <= 0) {
+		printf("%s: axistream is not found\n", __func__);
+		return -EINVAL;
+	}
+	priv->dmatx = (struct axidma_reg *)fdtdec_get_int(gd->fdt_blob,
+							  offset, "reg", 0);
+	if (!priv->dmatx) {
+		printf("%s: axi_dma register space not found\n", __func__);
+		return -EINVAL;
+	}
 	/* RX channel offset is 0x30 */
-	priv->dmarx = (struct axidma_reg *)(dma_addr + 0x30);
-	dev->init = axiemac_init;
-	dev->halt = axiemac_halt;
-	dev->send = axiemac_send;
-	dev->recv = axiemac_recv;
-	dev->write_hwaddr = axiemac_setup_mac;
-
-#ifdef CONFIG_PHY_ADDR
-	priv->phyaddr = CONFIG_PHY_ADDR;
-#else
+	priv->dmarx = (struct axidma_reg *)((u32)priv->dmatx + 0x30);
+
 	priv->phyaddr = -1;
-#endif
 
-	eth_register(dev);
+	offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset,
+				       "phy-handle");
+	if (offset > 0)
+		priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);
+
+	phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+	if (phy_mode)
+		pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+	if (pdata->phy_interface == -1) {
+		debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+		return -EINVAL;
+	}
+	priv->interface = pdata->phy_interface;
+
+	printf("AXI EMAC: %lx, phyaddr %d, interface %s\n", (ulong)priv->iobase,
+	       priv->phyaddr, phy_string_for_interface(priv->interface));
 
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
-	miiphy_register(dev->name, axiemac_miiphy_read, axiemac_miiphy_write);
-	priv->bus = miiphy_get_dev_by_name(dev->name);
-	priv->bus->reset = axiemac_bus_reset;
-#endif
-	return 1;
+	return 0;
 }
+
+static const struct udevice_id axi_emac_ids[] = {
+	{ .compatible = "xlnx,axi-ethernet-1.00.a" },
+	{ }
+};
+
+U_BOOT_DRIVER(axi_emac) = {
+	.name	= "axi_emac",
+	.id	= UCLASS_ETH,
+	.of_match = axi_emac_ids,
+	.ofdata_to_platdata = axi_emac_ofdata_to_platdata,
+	.probe	= axi_emac_probe,
+	.remove	= axi_emac_remove,
+	.ops	= &axi_emac_ops,
+	.priv_auto_alloc_size = sizeof(struct axidma_priv),
+	.platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};

drivers/net/xilinx_ll_temac.c

@@ -303,7 +303,8 @@ int xilinx_ll_temac_initialize(bd_t *bis, struct ll_temac_info *devinf)
 	if (devinf->devname) {
 		strncpy(dev->name, devinf->devname, sizeof(dev->name));
 	} else {
-		snprintf(dev->name, sizeof(dev->name), "lltemac.%lx", devinf->base_addr);
+		snprintf(dev->name, sizeof(dev->name), "ll_tem.%lx",
+			 devinf->base_addr);
 		devinf->devname = dev->name;
 	}
 

drivers/net/zynq_gem.c

@@ -57,7 +57,11 @@ DECLARE_GLOBAL_DATA_PTR;
 #define ZYNQ_GEM_NWCFG_SPEED1000	0x000000400 /* 1Gbps operation */
 #define ZYNQ_GEM_NWCFG_FDEN		0x000000002 /* Full Duplex mode */
 #define ZYNQ_GEM_NWCFG_FSREM		0x000020000 /* FCS removal */
+#ifdef CONFIG_ARM64
+#define ZYNQ_GEM_NWCFG_MDCCLKDIV	0x000100000 /* Div pclk by 64, max 160MHz */
+#else
 #define ZYNQ_GEM_NWCFG_MDCCLKDIV	0x0000c0000 /* Div pclk by 48, max 120MHz */
+#endif
 
 #ifdef CONFIG_ARM64
 # define ZYNQ_GEM_DBUS_WIDTH	(1 << 21) /* 64 bit bus */

drivers/serial/Kconfig

@@ -112,6 +112,13 @@ config DEBUG_UART_S5P
 	  will need to provide parameters to make this work. The driver will
 	  be available until the real driver-model serial is running.
 
+config DEBUG_UART_UARTLITE
+	bool "Xilinx Uartlite"
+	help
+	  Select this to enable a debug UART using the serial_uartlite driver.
+	  You will need to provide parameters to make this work. The driver will
+	  be available until the real driver-model serial is running.
+
 config DEBUG_UART_ZYNQ
 	bool "Xilinx Zynq"
 	help
@@ -271,4 +278,11 @@ config UNIPHIER_SERIAL
 	  If you have a UniPhier based board and want to use the on-chip
 	  serial ports, say Y to this option. If unsure, say N.
 
+config XILINX_UARTLITE
+	bool "Xilinx Uarlite support"
+	depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || 4xx)
+	help
+	  If you have a Xilinx based board and want to use the uartlite
+	  serial ports, say Y to this option. If unsure, say N.
+
 endmenu

drivers/serial/serial_xuartlite.c

 /*
- * (C) Copyright 2008-2011 Michal Simek <monstr@monstr.eu>
+ * (C) Copyright 2008 - 2015 Michal Simek <monstr@monstr.eu>
  * Clean driver and add xilinx constant from header file
  *
  * (C) Copyright 2004 Atmark Techno, Inc.
@@ -10,13 +10,17 @@
 
 #include <config.h>
 #include <common.h>
+#include <dm.h>
 #include <asm/io.h>
 #include <linux/compiler.h>
 #include <serial.h>
 
-#define SR_TX_FIFO_FULL		0x08 /* transmit FIFO full */
-#define SR_RX_FIFO_VALID_DATA	0x01 /* data in receive FIFO */
-#define SR_RX_FIFO_FULL		0x02 /* receive FIFO full */
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SR_TX_FIFO_FULL		BIT(3) /* transmit FIFO full */
+#define SR_TX_FIFO_EMPTY	BIT(2) /* transmit FIFO empty */
+#define SR_RX_FIFO_VALID_DATA	BIT(0) /* data in receive FIFO */
+#define SR_RX_FIFO_FULL		BIT(1) /* receive FIFO full */
 
 #define ULITE_CONTROL_RST_TX	0x01
 #define ULITE_CONTROL_RST_RX	0x02
@@ -28,135 +32,111 @@ struct uartlite {
 	unsigned int control;
 };
 
-static struct uartlite *userial_ports[4] = {
-#ifdef XILINX_UARTLITE_BASEADDR
-	[0] = (struct uartlite *)XILINX_UARTLITE_BASEADDR,
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR1
-	[1] = (struct uartlite *)XILINX_UARTLITE_BASEADDR1,
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR2
-	[2] = (struct uartlite *)XILINX_UARTLITE_BASEADDR2,
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR3
-	[3] = (struct uartlite *)XILINX_UARTLITE_BASEADDR3
-#endif
+struct uartlite_platdata {
+	struct uartlite *regs;
 };
 
-static void uartlite_serial_putc(const char c, const int port)
+static int uartlite_serial_putc(struct udevice *dev, const char ch)
 {
-	struct uartlite *regs = userial_ports[port];
+	struct uartlite_platdata *plat = dev_get_platdata(dev);
+	struct uartlite *regs = plat->regs;
 
-	if (c == '\n')
-		uartlite_serial_putc('\r', port);
+	if (in_be32(&regs->status) & SR_TX_FIFO_FULL)
+		return -EAGAIN;
 
-	while (in_be32(&regs->status) & SR_TX_FIFO_FULL)
-		;
-	out_be32(&regs->tx_fifo, c & 0xff);
-}
+	out_be32(&regs->tx_fifo, ch & 0xff);
 
-static void uartlite_serial_puts(const char *s, const int port)
-{
-	while (*s)
-		uartlite_serial_putc(*s++, port);
+	return 0;
 }
 
-static int uartlite_serial_getc(const int port)
+static int uartlite_serial_getc(struct udevice *dev)
 {
-	struct uartlite *regs = userial_ports[port];
+	struct uartlite_platdata *plat = dev_get_platdata(dev);
+	struct uartlite *regs = plat->regs;
+
+	if (!(in_be32(&regs->status) & SR_RX_FIFO_VALID_DATA))
+		return -EAGAIN;
 
-	while (!(in_be32(&regs->status) & SR_RX_FIFO_VALID_DATA))
-		;
 	return in_be32(&regs->rx_fifo) & 0xff;
 }
 
-static int uartlite_serial_tstc(const int port)
+static int uartlite_serial_pending(struct udevice *dev, bool input)
 {
-	struct uartlite *regs = userial_ports[port];
+	struct uartlite_platdata *plat = dev_get_platdata(dev);
+	struct uartlite *regs = plat->regs;
+
+	if (input)
+		return in_be32(&regs->status) & SR_RX_FIFO_VALID_DATA;
 
-	return in_be32(&regs->status) & SR_RX_FIFO_VALID_DATA;
+	return !(in_be32(&regs->status) & SR_TX_FIFO_EMPTY);
 }
 
-static int uartlite_serial_init(const int port)
+static int uartlite_serial_probe(struct udevice *dev)
 {
-	struct uartlite *regs = userial_ports[port];
+	struct uartlite_platdata *plat = dev_get_platdata(dev);
+	struct uartlite *regs = plat->regs;
 
-	if (regs) {
-		out_be32(&regs->control, 0);
-		out_be32(&regs->control,
-			 ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX);
-		in_be32(&regs->control);
-		return 0;
-	}
+	out_be32(&regs->control, 0);
+	out_be32(&regs->control, ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX);
+	in_be32(&regs->control);
 
-	return -1;
+	return 0;
 }
 
-/* Multi serial device functions */
-#define DECLARE_ESERIAL_FUNCTIONS(port) \
-	static int userial##port##_init(void) \
-				{ return uartlite_serial_init(port); } \
-	static void userial##port##_setbrg(void) {} \
-	static int userial##port##_getc(void) \
-				{ return uartlite_serial_getc(port); } \
-	static int userial##port##_tstc(void) \
-				{ return uartlite_serial_tstc(port); } \
-	static void userial##port##_putc(const char c) \
-				{ uartlite_serial_putc(c, port); } \
-	static void userial##port##_puts(const char *s) \
-				{ uartlite_serial_puts(s, port); }
-
-/* Serial device descriptor */
-#define INIT_ESERIAL_STRUCTURE(port, __name) {	\
-	.name	= __name,			\
-	.start	= userial##port##_init,		\
-	.stop	= NULL,				\
-	.setbrg	= userial##port##_setbrg,	\
-	.getc	= userial##port##_getc,		\
-	.tstc	= userial##port##_tstc,		\
-	.putc	= userial##port##_putc,		\
-	.puts	= userial##port##_puts,		\
+static int uartlite_serial_ofdata_to_platdata(struct udevice *dev)
+{
+	struct uartlite_platdata *plat = dev_get_platdata(dev);
+
+	plat->regs = (struct uartlite *)dev_get_addr(dev);
+
+	return 0;
 }
 
-DECLARE_ESERIAL_FUNCTIONS(0);
-struct serial_device uartlite_serial0_device =
-	INIT_ESERIAL_STRUCTURE(0, "ttyUL0");
-DECLARE_ESERIAL_FUNCTIONS(1);
-struct serial_device uartlite_serial1_device =
-	INIT_ESERIAL_STRUCTURE(1, "ttyUL1");
-DECLARE_ESERIAL_FUNCTIONS(2);
-struct serial_device uartlite_serial2_device =
-	INIT_ESERIAL_STRUCTURE(2, "ttyUL2");
-DECLARE_ESERIAL_FUNCTIONS(3);
-struct serial_device uartlite_serial3_device =
-	INIT_ESERIAL_STRUCTURE(3, "ttyUL3");
-
-__weak struct serial_device *default_serial_console(void)
+static const struct dm_serial_ops uartlite_serial_ops = {
+	.putc = uartlite_serial_putc,
+	.pending = uartlite_serial_pending,
+	.getc = uartlite_serial_getc,
+};
+
+static const struct udevice_id uartlite_serial_ids[] = {
+	{ .compatible = "xlnx,opb-uartlite-1.00.b", },
+	{ .compatible = "xlnx,xps-uartlite-1.00.a" },
+	{ }
+};
+
+U_BOOT_DRIVER(serial_uartlite) = {
+	.name	= "serial_uartlite",
+	.id	= UCLASS_SERIAL,
+	.of_match = uartlite_serial_ids,
+	.ofdata_to_platdata = uartlite_serial_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct uartlite_platdata),
+	.probe = uartlite_serial_probe,
+	.ops	= &uartlite_serial_ops,
+	.flags = DM_FLAG_PRE_RELOC,
+};
+
+#ifdef CONFIG_DEBUG_UART_UARTLITE
+
+#include <debug_uart.h>
+
+static inline void _debug_uart_init(void)
 {
-	if (userial_ports[0])
-		return &uartlite_serial0_device;
-	if (userial_ports[1])
-		return &uartlite_serial1_device;
-	if (userial_ports[2])
-		return &uartlite_serial2_device;
-	if (userial_ports[3])
-		return &uartlite_serial3_device;
-
-	return NULL;
+	struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE;
+
+	out_be32(&regs->control, 0);
+	out_be32(&regs->control, ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX);
+	in_be32(&regs->control);
 }
 
-void uartlite_serial_initialize(void)
+static inline void _debug_uart_putc(int ch)
 {
-#ifdef XILINX_UARTLITE_BASEADDR
-	serial_register(&uartlite_serial0_device);
-#endif /* XILINX_UARTLITE_BASEADDR */
-#ifdef XILINX_UARTLITE_BASEADDR1
-	serial_register(&uartlite_serial1_device);
-#endif /* XILINX_UARTLITE_BASEADDR1 */
-#ifdef XILINX_UARTLITE_BASEADDR2
-	serial_register(&uartlite_serial2_device);
-#endif /* XILINX_UARTLITE_BASEADDR2 */
-#ifdef XILINX_UARTLITE_BASEADDR3
-	serial_register(&uartlite_serial3_device);
-#endif /* XILINX_UARTLITE_BASEADDR3 */
+	struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE;
+
+	while (in_be32(&regs->status) & SR_TX_FIFO_FULL)
+		;
+
+	out_be32(&regs->tx_fifo, ch & 0xff);
 }
+
+DEBUG_UART_FUNCS
+#endif

drivers/serial/serial_zynq.c

@@ -156,13 +156,8 @@ static int zynq_serial_pending(struct udevice *dev, bool input)
 static int zynq_serial_ofdata_to_platdata(struct udevice *dev)
 {
 	struct zynq_uart_priv *priv = dev_get_priv(dev);
-	fdt_addr_t addr;
 
-	addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
-	if (addr == FDT_ADDR_T_NONE)
-		return -EINVAL;
-
-	priv->regs = (struct uart_zynq *)addr;
+	priv->regs = (struct uart_zynq *)dev_get_addr(dev);
 
 	return 0;
 }
@@ -177,6 +172,7 @@ static const struct dm_serial_ops zynq_serial_ops = {
 static const struct udevice_id zynq_serial_ids[] = {
 	{ .compatible = "xlnx,xuartps" },
 	{ .compatible = "cdns,uart-r1p8" },
+	{ .compatible = "cdns,uart-r1p12" },
 	{ }
 };
 

include/configs/fx12mm.h

-/*
- * (C) Copyright 2008
- *
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology  http://qtec.com
- *
- * Georg Schardt <schardt@team-ctech.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec,
- * see http://www.em.avnet.com
- */
-
-#ifndef __CONFIG_FX12_H
-#define __CONFIG_FX12_H
-
-#include "../board/avnet/fx12mm/xparameters.h"
-
-/* cmd config */
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-
-/* sdram */
-#define CONFIG_SYS_SDRAM_SIZE_MB       64
-
-/* environment */
-#define CONFIG_ENV_IS_IN_FLASH  1
-#define CONFIG_ENV_SIZE         0x10000
-#define CONFIG_ENV_SECT_SIZE    0x10000
-#define CONFIG_SYS_ENV_OFFSET   0xA0000
-#define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET)
-#define CONFIG_ENV_OVERWRITE 	1
-
-/*Misc*/
-#define CONFIG_PREBOOT      	"echo U-Boot is up and running;"
-
-/*Flash*/
-#define CONFIG_SYS_FLASH_SIZE          (4*1024*1024)
-#define CONFIG_SYS_MAX_FLASH_SECT      71
-#define MTDIDS_DEFAULT		"nor0=fx12mm-flash"
-#define MTDPARTS_DEFAULT	"mtdparts=fx12mm-flash:-(user)"
-
-#include "configs/xilinx-ppc405.h"
-
-#endif	/* __CONFIG_H */

include/configs/microblaze-generic.h

@@ -32,54 +32,20 @@
 #endif
 
 /* uart */
-#ifdef XILINX_UARTLITE_BASEADDR
-# define CONFIG_XILINX_UARTLITE
-# define CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
-# define CONFIG_BAUDRATE	XILINX_UARTLITE_BAUDRATE
-# define CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-# define CONSOLE_ARG	"console=console=ttyUL0,115200\0"
-#elif XILINX_UART16550_BASEADDR
-# define CONFIG_SYS_NS16550_SERIAL
-# if defined(__MICROBLAZEEL__)
-#  define CONFIG_SYS_NS16550_REG_SIZE	-4
-# else
-#  define CONFIG_SYS_NS16550_REG_SIZE	4
-# endif
-# define CONFIG_CONS_INDEX		1
-# define CONFIG_SYS_NS16550_COM1 \
-		((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
-# define CONFIG_SYS_NS16550_CLK	XILINX_UART16550_CLOCK_HZ
 # define CONFIG_BAUDRATE	115200
-
 /* The following table includes the supported baudrates */
 # define CONFIG_SYS_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-# define CONSOLE_ARG	"console=console=ttyS0,115200\0"
-#else
-# error Undefined uart
-#endif
 
 /* setting reset address */
 /*#define	CONFIG_SYS_RESET_ADDRESS	CONFIG_SYS_TEXT_BASE*/
 
-/* ethernet */
-#undef CONFIG_SYS_ENET
-#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL)
-# define CONFIG_XILINX_EMACLITE	1
-# define CONFIG_SYS_ENET
-#endif
-#if defined(XILINX_AXIEMAC_BASEADDR)
-# define CONFIG_XILINX_AXIEMAC	1
-# define CONFIG_SYS_ENET
-#endif
-
-#undef ET_DEBUG
-
 /* gpio */
 #ifdef XILINX_GPIO_BASEADDR
 # define CONFIG_XILINX_GPIO
 # define CONFIG_SYS_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
 #endif
+#define CONFIG_BOARD_LATE_INIT
 
 /* interrupt controller */
 #ifdef XILINX_INTC_BASEADDR
@@ -103,13 +69,6 @@
 # endif
 #endif
 
-#if !defined(CONFIG_OF_CONTROL) || \
-	(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL))
-/* ddr sdram - main memory */
-# define CONFIG_SYS_SDRAM_BASE	XILINX_RAM_START
-# define CONFIG_SYS_SDRAM_SIZE	XILINX_RAM_SIZE
-#endif
-
 #define CONFIG_SYS_MALLOC_LEN	0xC0000
 
 /* Stack location before relocation */
@@ -198,16 +157,6 @@
 #endif /* !SPIFLASH */
 #endif /* !FLASH */
 
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
-# define CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-# define SYSTEMACE_CONFIG_FPGA
-# define CONFIG_SYS_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-# define CONFIG_SYS_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
-# define CONFIG_DOS_PARTITION
-#endif
-
 #if defined(XILINX_USE_ICACHE)
 # define CONFIG_ICACHE
 #else
@@ -245,17 +194,6 @@
 # undef CONFIG_CMD_CACHE
 #endif
 
-#ifdef CONFIG_SYS_ENET
-# define CONFIG_CMD_PING
-# define CONFIG_CMD_DHCP
-# define CONFIG_CMD_TFTPPUT
-#endif
-
-#if defined(CONFIG_SYSTEMACE)
-# define CONFIG_CMD_EXT2
-# define CONFIG_CMD_FAT
-#endif
-
 #if defined(FLASH)
 # define CONFIG_CMD_JFFS2
 # define CONFIG_CMD_UBI
@@ -315,7 +253,7 @@
 #define	CONFIG_SYS_MAXARGS	15
 #define	CONFIG_SYS_LONGHELP
 /* default load address */
-#define	CONFIG_SYS_LOAD_ADDR	XILINX_RAM_START
+#define	CONFIG_SYS_LOAD_ADDR	0
 
 #define	CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
 #define	CONFIG_BOOTARGS		"root=romfs"
@@ -342,15 +280,10 @@
 
 #define CONFIG_CMDLINE_EDITING
 
-#define CONFIG_NETCONSOLE
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
 /* Enable flat device tree support */
 #define CONFIG_LMB		1
-#define CONFIG_FIT		1
 #define CONFIG_OF_LIBFDT	1
 
 #if defined(CONFIG_XILINX_AXIEMAC)
@@ -358,20 +291,19 @@
 # define CONFIG_CMD_MII		1
 # define CONFIG_PHY_GIGE	1
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	1
-# define CONFIG_PHYLIB		1
 # define CONFIG_PHY_ATHEROS	1
 # define CONFIG_PHY_BROADCOM	1
 # define CONFIG_PHY_DAVICOM	1
 # define CONFIG_PHY_LXT		1
 # define CONFIG_PHY_MARVELL	1
 # define CONFIG_PHY_MICREL	1
+# define CONFIG_PHY_MICREL_KSZ9021
 # define CONFIG_PHY_NATSEMI	1
 # define CONFIG_PHY_REALTEK	1
 # define CONFIG_PHY_VITESSE	1
 #else
 # undef CONFIG_MII
 # undef CONFIG_CMD_MII
-# undef CONFIG_PHYLIB
 #endif
 
 /* SPL part */

include/configs/ml507.h

-/*
- * (C) Copyright 2008
- *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- *  This work has been supported by: QTechnology  http://qtec.com/
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*CPU*/
-#define CONFIG_440		1
-#define CONFIG_XILINX_ML507	1
-#include "../board/xilinx/ml507/xparameters.h"
-
-/*Mem Map*/
-#define CONFIG_SYS_SDRAM_SIZE_MB	256
-
-/*Env*/
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define	CONFIG_ENV_SIZE		0x20000
-#define	CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_OFFSET	0x340000
-#define CONFIG_ENV_ADDR		(XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET)
-
-/*Misc*/
-#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
-
-/*Flash*/
-#define	CONFIG_SYS_FLASH_SIZE	(32*1024*1024)
-#define	CONFIG_SYS_MAX_FLASH_SECT	259
-#define MTDIDS_DEFAULT		"nor0=ml507-flash"
-#define MTDPARTS_DEFAULT	"mtdparts=ml507-flash:-(user)"
-
-/*Generic Configs*/
-#include <configs/xilinx-ppc440.h>
-
-#endif						/* __CONFIG_H */

include/configs/v5fx30teval.h

-/*
- * (C) Copyright 2008
- *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- *  This work has been supported by: QTechnology  http://qtec.com/
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*CPU*/
-#define CONFIG_440		1
-#define CONFIG_XILINX_ML507	1
-#include "../board/avnet/v5fx30teval/xparameters.h"
-
-/*Mem Map*/
-#define CONFIG_SYS_SDRAM_SIZE_MB	64
-
-/*Env*/
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define	CONFIG_ENV_SIZE		0x20000
-#define	CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_OFFSET		0x1A0000
-#define CONFIG_ENV_ADDR		(XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET)
-
-/*Misc*/
-#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
-
-/*Flash*/
-#define	CONFIG_SYS_FLASH_SIZE		(16*1024*1024)
-#define	CONFIG_SYS_MAX_FLASH_SECT	131
-#define MTDIDS_DEFAULT		"nor0=v5fx30t-flash"
-#define MTDPARTS_DEFAULT	"mtdparts=v5fx30t-flash:-(user)"
-
-/*Generic Configs*/
-#include <configs/xilinx-ppc440.h>
-
-#endif						/* __CONFIG_H */

include/configs/xilinx-ppc.h

 /*
  * (C) Copyright 2008
- *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  *  This work has been supported by: QTechnology  http://qtec.com/
  *
  *  (C) Copyright 2008
@@ -101,22 +101,10 @@
 #define CONFIG_SYS_NO_FLASH
 #endif
 
-/* serial communication */
-#ifdef XPAR_UARTLITE_0_BASEADDR
-#define CONFIG_XILINX_UARTLITE
-#define XILINX_UARTLITE_BASEADDR	XPAR_UARTLITE_0_BASEADDR
-#define CONFIG_BAUDRATE			XPAR_UARTLITE_0_BAUDRATE
-#define CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-#else
-#ifdef XPAR_UARTNS550_0_BASEADDR
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	4
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550_COM1		XPAR_UARTNS550_0_BASEADDR
-#define CONFIG_SYS_NS16550_CLK		XPAR_UARTNS550_0_CLOCK_FREQ_HZ
+#define CONFIG_OF_LIBFDT       1
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 115200 }
-#endif
-#endif
+/* The following table includes the supported baudrates */
+# define CONFIG_SYS_BAUDRATE_TABLE \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 #endif						/* __CONFIG_H */

include/configs/xilinx-ppc405-generic.h

 /*
  *
  * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  * This work has been supported by: QTechnology http://qtec.com/
  *
  * (C) Copyright 2008
@@ -14,6 +14,9 @@
 
 #include "../board/xilinx/ppc405-generic/xparameters.h"
 
+#define CONFIG_405		1
+#define CONFIG_XILINX_405	1
+
 /* sdram */
 #define CONFIG_SYS_SDRAM_SIZE_MB	256
 
@@ -26,16 +29,16 @@
 #define CONFIG_ENV_OVERWRITE		1
 
 /*Misc*/
-#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
+#define CONFIG_PREBOOT		"echo U-Boot is up and running;"
 
 /*Flash*/
-#define CONFIG_SYS_FLASH_BASE			XPAR_FLASH_MEM0_BASEADDR
-#define CONFIG_SYS_FLASH_SIZE		(32*1024*1024)
-#define CONFIG_SYS_MAX_FLASH_SECT	71
+#define CONFIG_SYS_FLASH_BASE		XPAR_FLASH_MEM0_BASEADDR
+#define CONFIG_SYS_FLASH_SIZE		(128*1024*1024)
+#define CONFIG_SYS_MAX_FLASH_SECT	1024
 #define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER		1
-#define MTDIDS_DEFAULT			"nor0=ppc405-flash"
-#define MTDPARTS_DEFAULT		"mtdpartsa=ppc405-flash:-(user)"
+#define MTDIDS_DEFAULT			"nor0=flash"
+#define MTDPARTS_DEFAULT		"mtdparts=flash:-(user)"
 
-#include <configs/xilinx-ppc405.h>
+#include <configs/xilinx-ppc.h>
 #endif			/* __CONFIG_H */