kconfig: move FSL_PCIE_COMPAT to platform Kconfig

Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NYork Sun <york.sun@nxp.com>

arch/arm/cpu/armv7/ls102xa/Kconfig

@@ -18,6 +18,14 @@ config ARCH_LS1021A
 menu "LS102xA architecture"
 	depends on ARCH_LS1021A
 
+config FSL_PCIE_COMPAT
+	string "PCIe compatible of Kernel DT"
+	depends on PCIE_LAYERSCAPE
+	default "fsl,ls1021a-pcie" if ARCH_LS1021A
+	help
+	  This compatible is used to find pci controller node in Kernel DT
+	  to complete fixup.
+
 config LS1_DEEP_SLEEP
 	bool "Deep sleep"
 	depends on ARCH_LS1021A

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -75,6 +75,17 @@ config FSL_LSCH3
 menu "Layerscape architecture"
 	depends on FSL_LSCH2 || FSL_LSCH3
 
+config FSL_PCIE_COMPAT
+	string "PCIe compatible of Kernel DT"
+	depends on PCIE_LAYERSCAPE
+	default "fsl,ls1012a-pcie" if ARCH_LS1012A
+	default "fsl,ls1043a-pcie" if ARCH_LS1043A
+	default "fsl,ls1046a-pcie" if ARCH_LS1046A
+	default "fsl,ls2080a-pcie" if ARCH_LS2080A
+	help
+	  This compatible is used to find pci controller node in Kernel DT
+	  to complete fixup.
+
 menu "Layerscape PPA"
 config FSL_LS_PPA
 	bool "FSL Layerscape PPA firmware support"

drivers/pci/pcie_layerscape_fixup.c

@@ -77,9 +77,9 @@ static void fdt_pcie_set_msi_map_entry(void *blob, struct ls_pcie *pcie,
 	nodeoffset = fdt_node_offset_by_compat_reg(blob, "fsl,ls-pcie",
 						   pcie->dbi_res.start);
 	if (nodeoffset < 0) {
-#ifdef FSL_PCIE_COMPAT /* Compatible with older version of dts node */
+#ifdef CONFIG_FSL_PCIE_COMPAT /* Compatible with older version of dts node */
 		nodeoffset = fdt_node_offset_by_compat_reg(blob,
-				FSL_PCIE_COMPAT, pcie->dbi_res.start);
+				CONFIG_FSL_PCIE_COMPAT, pcie->dbi_res.start);
 		if (nodeoffset < 0)
 			return;
 #else
@@ -150,9 +150,9 @@ static void ft_pcie_ls_setup(void *blob, struct ls_pcie *pcie)
 	off = fdt_node_offset_by_compat_reg(blob, "fsl,ls-pcie",
 					    pcie->dbi_res.start);
 	if (off < 0) {
-#ifdef FSL_PCIE_COMPAT /* Compatible with older version of dts node */
+#ifdef CONFIG_FSL_PCIE_COMPAT /* Compatible with older version of dts node */
 		off = fdt_node_offset_by_compat_reg(blob,
-						    FSL_PCIE_COMPAT,
+						    CONFIG_FSL_PCIE_COMPAT,
 						    pcie->dbi_res.start);
 		if (off < 0)
 			return;

include/configs/ls1012aqds.h

@@ -154,7 +154,6 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 #define CONFIG_PCIE1		/* PCIE controller 1 */
-#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_SCAN_SHOW

include/configs/ls1012ardb.h

@@ -67,7 +67,6 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 #define CONFIG_PCIE1		/* PCIE controller 1 */
-#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_SCAN_SHOW

include/configs/ls1021aqds.h

@@ -500,7 +500,6 @@ unsigned long get_board_ddr_clk(void);
 /* PCIe */
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 #define CONFIG_PCIE2		/* PCIE controller 2 */
-#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SCAN_SHOW

include/configs/ls1021atwr.h

@@ -370,7 +370,6 @@
 /* PCIe */
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 #define CONFIG_PCIE2		/* PCIE controller 2 */
-#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SCAN_SHOW

include/configs/ls1043a_common.h

@@ -118,7 +118,6 @@
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 #define CONFIG_PCIE2		/* PCIE controller 2 */
 #define CONFIG_PCIE3		/* PCIE controller 3 */
-#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
 
 #ifdef CONFIG_PCI
 #define CONFIG_NET_MULTI

include/configs/ls2080a_common.h

@@ -170,9 +170,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_MC_RSV_MEM_ALIGN			(512UL * 1024 * 1024)
 #endif
 
-/* PCIe */
-#define FSL_PCIE_COMPAT "fsl,ls2080a-pcie"
-
 /* Command line configuration */
 #define CONFIG_CMD_ENV