Add multi-chip NAND support for the TQM8548 modules

This patches configures the NAND UPM-FSL driver with multi-chip
support for the Micron MT29F8G08FAB NAND flash memory on the
TQM8548 modules.
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

board/tqc/tqm85xx/nand.c

@@ -385,7 +385,7 @@ static void upmb_write (u_char addr, ulong val)
 			MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
 
 	/* dummy access to perform write */
-	out_8 ((void __iomem *)CONFIG_SYS_NAND0_BASE, 0);
+	out_8 ((void __iomem *)CONFIG_SYS_NAND_BASE, 0);
 
 	clrbits_be32(&lbc->mbmr, MxMR_OP_WARR);
 }
@@ -446,7 +446,10 @@ static struct fsl_upm_nand fun = {
 	.width = 8,
 	.upm_cmd_offset = 0x08,
 	.upm_addr_offset = 0x10,
+	.upm_mar_chip_offset = CONFIG_SYS_NAND_CS_DIST,
+	.chip_offset = CONFIG_SYS_NAND_CS_DIST,
 	.chip_delay = NAND_BIG_DELAY_US,
+	.wait_flags = FSL_UPM_WAIT_RUN_PATTERN | FSL_UPM_WAIT_WRITE_BUFFER,
 };
 
 void board_nand_select_device (struct nand_chip *nand, int chip)

include/configs/TQM85xx.h

@@ -371,35 +371,17 @@
 #define	CONFIG_SYS_NAND_CS_DIST	0x200
 
 #define CONFIG_SYS_NAND_SIZE		0x8000
-#define CONFIG_SYS_NAND0_BASE		(CONFIG_SYS_CCSRBAR + 0x03010000)
-#define CONFIG_SYS_NAND1_BASE		(CONFIG_SYS_NAND0_BASE + CONFIG_SYS_NAND_CS_DIST)
-#define CONFIG_SYS_NAND2_BASE		(CONFIG_SYS_NAND1_BASE + CONFIG_SYS_NAND_CS_DIST)
-#define CONFIG_SYS_NAND3_BASE		(CONFIG_SYS_NAND2_BASE + CONFIG_SYS_NAND_CS_DIST)
-
-#define CONFIG_SYS_MAX_NAND_DEVICE     2	/* Max number of NAND devices	*/
-
-#if (CONFIG_SYS_MAX_NAND_DEVICE == 1)
-#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE }
-#elif (CONFIG_SYS_MAX_NAND_DEVICE == 2)
-#define	CONFIG_SYS_NAND_QUIET_TEST	1
-#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE, \
-			     CONFIG_SYS_NAND1_BASE, \
-}
-#elif (CONFIG_SYS_MAX_NAND_DEVICE == 4)
-#define	CONFIG_SYS_NAND_QUIET_TEST	1
-#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE, \
-			     CONFIG_SYS_NAND1_BASE, \
-			     CONFIG_SYS_NAND2_BASE, \
-			     CONFIG_SYS_NAND3_BASE, \
-}
-#endif
+#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_CCSRBAR + 0x03010000)
+
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices	*/
+#define CONFIG_SYS_NAND_MAX_CHIPS	2	/* Number of chips per device	*/
 
 /* CS3 for NAND Flash */
-#define CONFIG_SYS_BR3_PRELIM		((CONFIG_SYS_NAND0_BASE & BR_BA) | BR_PS_8 | \
-				 BR_MS_UPMB | BR_V)
+#define CONFIG_SYS_BR3_PRELIM		((CONFIG_SYS_NAND_BASE & BR_BA) | \
+					 BR_PS_8 | BR_MS_UPMB | BR_V)
 #define CONFIG_SYS_OR3_PRELIM		(P2SZ_TO_AM(CONFIG_SYS_NAND_SIZE) | OR_UPM_BI)
 
-#define NAND_BIG_DELAY_US       25	/* max tR for Samsung devices	*/
+#define NAND_BIG_DELAY_US		25	/* max tR for Samsung devices	*/
 
 #endif /* CONFIG_NAND */