arm: mvebu: helios4: Reduce U-Boot image size

Remove unused I2C support in SPL and use simple_malloc functions to
reduce SPL image size.
Since Helios4 does not have any PCIe allocated on SerDes, remove PCI
support. MTD layer on top of SPI flash is not needed, remove it also.
Signed-off-by: NAditya Prayoga <aditya@kobol.io>
Reviewed-by: NStefan Roese <sr@denx.de>
Tested-By: NDennis Gilmore <dgilmore@redhat.com>
Reviewed-By: NDennis Gilmore <dgilmore@redhat.com>
Signed-off-by: NStefan Roese <sr@denx.de>

configs/helios4_defconfig

@@ -8,6 +8,7 @@ CONFIG_TARGET_HELIOS4=y
 CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_DEBUG_UART_CLOCK=250000000
@@ -20,12 +21,10 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x141
-CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
@@ -52,11 +51,9 @@ CONFIG_MMC_SDHCI_MV=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_MII=y
-CONFIG_PCI=y
 CONFIG_SCSI=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y

include/configs/helios4.h

@@ -54,12 +54,6 @@
 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\