arm64: zynqmp: Move USB3 PHY properties from DWC3 node to USB node

Move the PHY properties from DWC3 node to USB node in ZynqMP DTs as here
the USB3 PHY used is PSGTR, which is connected to Xilinx USB core. This
PHY initialization should be handled from Xilinx USB core as the
prerequisite register configurations are done here only.
Signed-off-by: NManish Narani <manish.narani@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

arch/arm/dts/zynqmp-p-a2197-00-revA.dts

@@ -545,6 +545,8 @@
 	status = "okay";
 	xlnx,usb-polarity = <0>;
 	xlnx,usb-reset-mode = <0>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 1 PHY_TYPE_USB3 0 1>;
 };
 
 &dwc3_0 {
@@ -553,8 +555,6 @@
 	snps,dis_u2_susphy_quirk;
 	snps,dis_u3_susphy_quirk;
 	maximum-speed = "super-speed";
-	phy-names = "usb3-phy";
-	phys = <&psgtr 1 PHY_TYPE_USB3 0 1>;
 };
 
 &usb1 {

arch/arm/dts/zynqmp-sck-kv-g-revA.dts

@@ -125,6 +125,8 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
 	usbhub: usb5744 { /* u43 */
 		compatible = "microchip,usb5744";
 		reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
@@ -135,8 +137,6 @@
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
 	maximum-speed = "super-speed";
 };
 

arch/arm/dts/zynqmp-sck-kv-g-revB.dts

@@ -109,14 +109,14 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
 };
 
 &dwc3_0 {
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
 	maximum-speed = "super-speed";
 };
 

arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts

@@ -424,14 +424,14 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 };
 
 &dwc3_0 {
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 	maximum-speed = "super-speed";
 };
 

arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts

@@ -221,27 +221,27 @@
 
 &usb0 {
 	status = "okay";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 0 PHY_TYPE_USB3 0 2>;
 };
 
 &dwc3_0 {
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 0 PHY_TYPE_USB3 0 2>;
 	maximum-speed = "super-speed";
 };
 
 /* ULPI SMSC USB3320 */
 &usb1 {
 	status = "okay";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
 };
 
 &dwc3_1 {
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
 	maximum-speed = "super-speed";
 };

arch/arm/dts/zynqmp-zcu100-revC.dts

@@ -561,13 +561,13 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 0>;
 };
 
 &dwc3_0 {
 	status = "okay";
 	dr_mode = "peripheral";
-	phy-names = "usb3-phy";
-	phys = <&psgtr 2 PHY_TYPE_USB3 0 0>;
 	maximum-speed = "super-speed";
 };
 
@@ -576,13 +576,13 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb1_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 0>;
 };
 
 &dwc3_1 {
 	status = "okay";
 	dr_mode = "host";
-	phy-names = "usb3-phy";
-	phys = <&psgtr 3 PHY_TYPE_USB3 1 0>;
 	maximum-speed = "super-speed";
 };
 

arch/arm/dts/zynqmp-zcu102-revA.dts

@@ -1019,14 +1019,14 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 };
 
 &dwc3_0 {
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 	maximum-speed = "super-speed";
 };
 

arch/arm/dts/zynqmp-zcu104-revA.dts

@@ -502,14 +502,14 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 };
 
 &dwc3_0 {
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 	maximum-speed = "super-speed";
 };
 

arch/arm/dts/zynqmp-zcu104-revC.dts

@@ -514,14 +514,14 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 };
 
 &dwc3_0 {
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 	maximum-speed = "super-speed";
 };
 

arch/arm/dts/zynqmp-zcu106-revA.dts

@@ -1012,14 +1012,14 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 };
 
 &dwc3_0 {
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 	maximum-speed = "super-speed";
 };
 

arch/arm/dts/zynqmp-zcu111-revA.dts

@@ -849,14 +849,14 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 };
 
 &dwc3_0 {
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 	maximum-speed = "super-speed";
 };
 

arch/arm/dts/zynqmp-zcu208-revA.dts

@@ -692,13 +692,13 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 };
 
 &dwc3_0 {
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 	maximum-speed = "super-speed";
 };

arch/arm/dts/zynqmp-zcu216-revA.dts

@@ -696,13 +696,13 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 };
 
 &dwc3_0 {
 	status = "okay";
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
-	phy-names = "usb3-phy";
-	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 	maximum-speed = "super-speed";
 };