OMAP3: Remove unused define CONFIG_OMAP3_*_DDR

This patch removes the unused definitions:
CONFIG_OMAP3_MICRON_DDR
CONFIG_OMAP3_NUMONYX_DDR
CONFIG_OMAP3_INFINEON_DDR
Signed-off-by: NThomas Weber <weber@corscience.de>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
Acked-by: NLuca Ceresoli <luca.ceresoli@comelit.it>

include/configs/cm_t35.h

@@ -112,9 +112,6 @@
 #define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR		1
-
 /* USB */
 #define CONFIG_MUSB_UDC			1
 #define CONFIG_USB_OMAP3		1

include/configs/dig297.h

@@ -109,9 +109,6 @@
 #define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION
 
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR
-
 /* library portions to compile in */
 #define CONFIG_RBTREE
 #define CONFIG_MTD_PARTITIONS

include/configs/igep0020.h

@@ -78,9 +78,6 @@
 #define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
-/* DDR  */
-#define CONFIG_OMAP3_NUMONYX_DDR	1
-
 /* USB */
 #define CONFIG_MUSB_UDC			1
 #define CONFIG_USB_OMAP3		1

include/configs/igep0030.h

@@ -78,9 +78,6 @@
 #define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
-/* DDR  */
-#define CONFIG_OMAP3_NUMONYX_DDR	1
-
 /* USB */
 #define CONFIG_MUSB_UDC			1
 #define CONFIG_USB_OMAP3		1

include/configs/omap3_mvblx.h

@@ -102,9 +102,6 @@
 #define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR		1
-
 /* USB */
 #define CONFIG_MUSB_UDC			1
 #define CONFIG_USB_OMAP3		1

include/configs/omap3_overo.h

@@ -90,9 +90,6 @@
 #define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR		1
-
 /* commands to include */
 #include <config_cmd_default.h>
 

include/configs/omap3_pandora.h

@@ -104,9 +104,6 @@
 #define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR		1
-
 /* commands to include */
 #include <config_cmd_default.h>
 

include/configs/omap3_sdp3430.h

@@ -137,9 +137,6 @@
 #define CONFIG_SYS_I2C_BUS_SELECT	1
 #define CONFIG_DRIVER_OMAP34XX_I2C	1
 
-/* DDR - I use Infineon DDR */
-#define CONFIG_OMAP3_INFINEON_DDR	1
-
 /* OMITTED:  single 1 Gbit MT29F1G NAND flash */
 
 /*

include/configs/omap3_zoom1.h

@@ -99,9 +99,6 @@
 #define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR		1
-
 /* USB */
 #define CONFIG_MUSB_UDC			1
 #define CONFIG_USB_OMAP3		1

include/configs/omap3_zoom2.h

@@ -99,9 +99,6 @@
 #define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR		1
-
 /* Status LED */
 #define CONFIG_STATUS_LED		1 /* Status LED enabled	*/
 #define CONFIG_BOARD_SPECIFIC_LED	1